SEM XII International Congress & Exposition on Experimental & Applied Mechanics

Abotula, S.
553	Effect of Strain Rate and Temperature on Dynamic Deformation of Nanolaminated Ti2AlC
Abraham, C.
129	Hole-drilling Residual Stress Measurement in an Intermediate Thickness Specimen
Absi, J.
397	Experimental Characterization of Integral Invariants in Wood Specimen Using the full Field Optical Technique
Abudaram, Y.J.
109	A Novel Method to Attach Membranes Uniformly on MAV wings
Abuzaid, W.
227	Relating Strain Fields and Microstructural Factors in Fatigue Crack Growth
Achuthan, A.
330	Characteristic Length Scale Investigation on the Nanoscale Deformation of Copper
Ackers, S.A.
435	Investigation of the Effect of Damage on the Mechanical Response of Salem Limestone at Subjected to Quasi-static and High Rate
Adam, L.
53	Non-local Damage-enhanced MFH for Multiscale Simulations of Composites
Adams, C.D.
65	Cyclic Plasticity Under Shock Loading in an HCP Metal
Adhikari, S.
136	Opto-acoustic Technique to Evaluate Adhesion Strength of Nano-scale Systems
Adrien, J.
84	Artifact Correction for DVC Measurements Using A Laboratory X-ray Source
100	3D Analysis of a Fatigue Crack in Cast Iron Using Digital Volume Correlation of X-ray Tomographic Images
Alagappan, P.
402	A Gibbs Potential Based Implicit Approach for Modeling Viscoelastic Solids
Albahadily, F.
409	Evaluation of Composite Bone Cement for Orthopedic Applications
Albertani, R.
331	Correlation of Structural Strain to Tip Vorticity and Lift for a MAV Pliant Membrane Wing
Alemayehu, F.M.
375	Uncertainty in the Dynamics of Gear-pair Fatigue and Fracture
Alexander, C.S.
55	Pressure-Shear Loading of Granular Materials
Ali, H.
110	Dynamic Measurements With a Luminescent Photoelastic Coating
Alkhader, M.
262	Experimental Investigation of Failure in Viscoelastic Elastomers Under Combined Shear and Pressure
Allahkarami, M.
173	Finite Element Model Generation Based on Stochastic Analysis on AFM Images
214	Inter-Cellular Joining for Amorphous Honeycombs
Allen, B.L.
210	A Versatile Microelectromechanical System for Fatigue Testing of Nanostructures
Aluru, N.R.
317	Multiscale Modeling of Mechanoresponsive Polymers
Amiri, A.
118	Experimental Investigation of Fatigue Behavior of Carbon Fiber Composites Using Fully Reversed Four Point Bending Test
Amirkhizi, A.V.
245	Polyurea-based Composites: Ultrasonic Testing and Dynamic Mechanical Properties Modeling
335	Shock Wave Interaction With Periodic Obstacles
An, Z.
476	Nanomechanics of cross-linking molecules identified through in-situ SEM peeling
Antoun, B.R.
217	Thermal Infrared Imaging to Study Microstructural Damage and Failure in Aluminum Alloys
390	Detailed Measurements of Thread Deformation and Failure in Thin Walled Aluminum Alloy Joints
106	Temperature Dependent Ductile Material Failure Constitutive Modeling With Validation Experiments
Anvari, B.
321	Effects of Membrane Composition and Cytoskeletal Proteins on Membrane Mechanics
Aradhya, S.V.
289	Simultaneous Measurement of Force and Conductance Across Single Molecule Junctions
Armiger, R.A.
296	Determination of Simple Shear Material Properties of the Brain at High Strain Rates
Arzoumanidis, G.A.
282	Novel High Resolution Sensor Concept
303	A Thermodynamic State Driven Nonlinear Viscoelastic Constitutive Model
Avachat, S.
446	Experimental Analysis of Dynamic Deformation and Damage in Composite Sandwich Structures Subjected to Underwater Impulsive Loads
Awasthi, A.
250	An Experimental Study on the Wave Propagation Behavior in a 2-D Granular Medium
Baccar, M.H.
153	Experimental Study of High Speed Ball End milling of Titanium Alloy (Ti-6Al-4V)
Backman, D.
234	The Effect of Riveting on the Fatigue Life of Fiber Metal Laminate Zero Load Transfer Joints
Bae, I.-T.
430	Radial Mechanical Properties of Boron Nitride Nanotubes
Bailey, A.M.
26	Injury Potential of Shock Induced Compressive Waves on Human Bone
Baker, M.
62	Dynamic Behavior and Numerical Modeling of Titanium 15-3-3-3 Alloy
Baker, M.S.
509	Contamination Thresholds of Pt- and RuO2-coated Microrelays
Balandraud, X.
60	Application of Full-field Measurements to Analyze the Thermo-mechanical Response of a Three-branch Rubber Specimen
Ballenger, C.
409	Evaluation of Composite Bone Cement for Orthopedic Applications
Bammann, D.J.
143	Formulation and Validation of a Thermomechanical Viscoelastic/Viscoplastic Constitutive Model for Amorphous Glassy Polymer
142	Formulation a Thermomechanical Internal State Variable Constitutive Model for Elastomers
Bandini, M.
46	Very High-cycle Fatigue Resistance of Shot Peened High-strength Aluminum Alloys
Bandla, S.
267	Nanotomography of Polymer Nanocomposite Nanofibers
Banks-Sills, L.
24	Delamination Toughness Tests of DCB Specimens Composed of Woven Composites
Barbosa, III, N.
15	MEMS Device for Fatigue Testing 25 Micrometer Thick Aluminum Specimens
Bar-Cohen, Y.
28	KEYNOTE: Humanlike Robots - Synthetically Mimicking Humans
Barile, C.
463	Hybrid Characterization of Laminated Wood With ESPI and Optimization Methods
Barsoum, R.G.S.
469	KEYNOTE: Elastomeric Polymers for Shockwave Mitigation and Extreme Loading Conditions
Barthelat, F.
239	Interfacial Fracture Toughness of Nacre
273	Scalation Pattern Increases Penetration Resistance of Striped Bass Fish Skin
236	Biomimetic Tapered Fibers for Enhanced Composite Toughness
290	Direct Measurements of the Cohesive Behavior of Soft Biological Interfaces
Bartholomew, W.
470	Thermal Analyses of Dental Ceramic Restorations
Bartoli, I.
361	Impact Monitoring in Aerospace Panels via Piezoelectric Rosettes
Baskaran, S.
281	Design of Ultrasonic Probe Configuration Using Finite-difference Time Domain Simulation
Baumert, E.K.
210	A Versatile Microelectromechanical System for Fatigue Testing of Nanostructures
249	Very High Cycle Fatigue Behavior Of Electroplated Ni Films
Baur, J.
150	Rate-Dependent, Large-Displacement Deformation of Vertically Aligned Carbon Nanotube Arrays
Baur, J.W.
241	Relaxation and Recovery Behavior of an Epoxy Based Shape Memory Polymer Resin
Bayly, P.V.
209	The Effects of Noise and Spatial Sampling on Identification of Material Parameters by Magnetic Resonance Elastography
352	Characterization of Murine Glioma by Magnetic Resonance Elastography: Preliminary Results
Bayraktar, E.
153	Experimental Study of High Speed Ball End milling of Titanium Alloy (Ti-6Al-4V)
99	Production of Metal Matrix Composites Using Thixinfiltration Techniques
163	Design of new Elastomeric Matrix Composites: Comparison of Mechanical Properties and Determining Viscoelastic Parameters via Continuous Micro Indentation
162	Low Velocity Impact Behaviour of the Epoxy Matrix Composites reinforced with Metallic and Oxide Particles
Beaubier, B.
213	CAD-based Calibration of a 3D DIC System
Behmanesh, I.
534	Information Gain Obtained From Extra Sensors on Model Updating of the Dowling Hall Footbridge
Beiermann, B.A.
240	Simultaneous Observation of Phase-Stepped Photoelastic Images Using Diffraction Gratings
317	Multiscale Modeling of Mechanoresponsive Polymers
Beliveau, A.L.
332	In Situ Dynamics of Electronics Assemblies Under Shock
Ben Azzouna, M.
259	Modified Constitutive Relation Error Strategy for Elastic Properties Identification
Benedetti, M.
102	Measurement of Metallic Adhesion Force-to-Elongation Profile Under High Separation-Rate Conditions
46	Very High-cycle Fatigue Resistance of Shot Peened High-strength Aluminum Alloys
Benjamin, C.
322	Experiments on Hydrogels of Varying Shape
Bennett, B.C.
26	Injury Potential of Shock Induced Compressive Waves on Human Bone
Berfield, T.A.
367	Mechanical Behavior of Bi-stable Buckled MEMS for Actuation and Energy Harvesting
365	Thermal Analysis of PZT Thin Films Using Digital Image Correlation
Bergers, L.I.J.C.
405	Enriched Digital Image Correlation to Characterize Geometrically Non-ideal Microbeams
Berthout, G.
163	Design of new Elastomeric Matrix Composites: Comparison of Mechanical Properties and Determining Viscoelastic Parameters via Continuous Micro Indentation
Besnard, G.
213	CAD-based Calibration of a 3D DIC System
Bester, J.N.
76	Plasticity and Ballistic Characterization of a new Armour Steel
Beuth, J.L.
510	Quantifying Size Effects in Polysilicon Using an In-situ On-chip Test Platform
Bhat, A.R.
299	Performance Evaluation of a Composite Armor Concept by Finite Element Simulations of Ballistic Tests
Bhattacharya, K.
343	Experimental Methods for Validation of Multiscale Plasticity Models
Bhattacharya, R.
514	Deformation Mechanisms in Mn+1AXn Phase Ternary Ceramics at High Strain Rates
Bigger, R.P.
363	A New Technique for Monitoring Inhomogeneous Deformation During Flyer Plate Impact
Billon, N.
77	New Thermo-mechanical Modelling for Visco Elastic, Visco Plastic Polymers
Blocher, D.B.
215	Frequency Multiplication and Demultiplication in MEMS
Boccaccio, A.
123	KEYNOTE: Recent Developments in the Contouring of Surfaces
Bodelot, L.
343	Experimental Methods for Validation of Multiscale Plasticity Models
Booker, J.D.
37	Simulation of Interference Fitted Joint Strength as Used in Hot Rolling Work Rolls
124	Modelling of Nosing for the Assembly of Aerospace Bearings
Borla, O.
138	Time Correlation Between Acoustic, Electromagnetic and Neutron Emissions in Rocks Under Compression
Boron, K.
286	Utilizing Knots to Reduce Dynamic Loads in Fire Service Rope Systems
Bortoluzzi, D.
102	Measurement of Metallic Adhesion Force-to-Elongation Profile Under High Separation-Rate Conditions
Boruah, S.
26	Injury Potential of Shock Induced Compressive Waves on Human Bone
Borvik, T.
17	Perforation of Aluminum Plates with 7.62 APM2 Bullets
Bossuyt, S.
260	Optimized Patterns for Digital Image Correlation
Bouamoul, A.
164	Impact Response of Ballistic Gelatin
Bouchair, A.
141	Experimental Analysis of the Semi-rigidity Joint in the Standardized Timber Beam
144	Simplified Calculation Method of the Torsion Effect on the Seismic Behavior of Timber Buildings
Bouchard, P.J.
457	Determination of Local Creep Properties in Weldments
Boujelbene, M.
153	Experimental Study of High Speed Ball End milling of Titanium Alloy (Ti-6Al-4V)
Boulet, T.
449	Brain Mechanical Imaging (BMI)
Bourget, D.
164	Impact Response of Ballistic Gelatin
Bouvard, J.L.
142	Formulation a Thermomechanical Internal State Variable Constitutive Model for Elastomers
143	Formulation and Validation of a Thermomechanical Viscoelastic/Viscoplastic Constitutive Model for Amorphous Glassy Polymer
Bouvier, S.
480	Microlithography Technique Advantages, Limits and its Coupling With EBSD Measurements
Boyce, B.L.
108	Evaluation of Microstructure-slip Relationships in BCC Tantalum
Boyd, S.W.
348	Through-thickness Load Transfer in Adhesively Bonded Composite Joints
Braga, A.M.B.
300	Use of Fiber Bragg Grating Strain Gages on a Pipeline Specimen Repaired With a CFRE Composite System
Brand, V.
509	Contamination Thresholds of Pt- and RuO2-coated Microrelays
Braun, P.V.
337	Molecular Tailoring of Interfacial Adhesion Using Self-assembled Monolayers
Broadfoot, S.W.
255	Dynamic Contact Mechanics of Geologic Materials: Experiments, Modeling and Applications
Bronkhorst, C.A.
212	Influence of Loading Kinetics on the Shock Response of Polycrystalline Copper
Brown, B.W.
268	A Comparison of Residual Stress Measurements on Linear Friction Welds Using the Contour Method and Neutron Diffraction
Brown, E.N.
433	Inverse Measurement of Stiffness by the Normalization Technique for J-integral Fracture Toughness
113	Incipient and Progressive Damage in Polyethylene Under Extreme Tensile Conditions
111	Large-Strain Time-Temperature Equivalence and Adiabatic Heating of Polyethylene
Brownell, W.E.
321	Effects of Membrane Composition and Cytoskeletal Proteins on Membrane Mechanics
Bruck, H.A.
374	Mechanics of Multifunctional Skin Structures
373	Mechanics of Fiber-reinforced Porous Polymer Composites
Budhoo, Y.
14	Ballistic Impact on Woven Glass/Epoxy Composites at High and Low Temperatures
13	Effect of Low Temperatures on the Ballistic Limit of Hybrid Woven Composites
Buffiere, J.Y.
100	3D Analysis of a Fatigue Crack in Cast Iron Using Digital Volume Correlation of X-ray Tomographic Images
Buffiere, J.-Y.
84	Artifact Correction for DVC Measurements Using A Laboratory X-ray Source
Bujanda, A.
66	Nano-scale Investigation of Microstructural Phenomenon Contributing to Toughening of Nanoparticulate Reinforced Polymers
Byer, C.M.
238	Experiments and Modeling of Microcompression of Single-crystal Magnesium
Cady, C.M.
111	Large-Strain Time-Temperature Equivalence and Adiabatic Heating of Polyethylene
Calixto, S.A
73	Digital Holographic Microscopy by Mirau Interferometric Objective
Canfield, T.R.
65	Cyclic Plasticity Under Shock Loading in an HCP Metal
Cao, Z.
387	Molecular Adhesion
Carazo Álvarez, D.
261	Photoelastic Testing and FE Analysis of T-Stub Model
Carazo Álvarez, J.D.
261	Photoelastic Testing and FE Analysis of T-Stub Model
Cardoso, S.
527	Damage Detection of Composites Under Fracture and Shear Using CNTs
252	Detection of Damage of Epoxy Composites Using Carbon Nanotube Network
Cargile, J.D.
435	Investigation of the Effect of Damage on the Mechanical Response of Salem Limestone at Subjected to Quasi-static and High Rate
Carlson, T.A.
414	Processing, Microstructure, and Properties of Carbon Nanotube Reinforced Silicon Carbide
Carpenter, T.J.
331	Correlation of Structural Strain to Tip Vorticity and Lift for a MAV Pliant Membrane Wing
Carpick, R.W.
283	Characterizing the Wear of Diamond-like-carbon Atomic Force Microscope Probes
Carpinteri, A.
138	Time Correlation Between Acoustic, Electromagnetic and Neutron Emissions in Rocks Under Compression
199	Damage Assessment in Syracuse Limestone Specimens by Frequency Analysis of Elastic Emissions
121	Absorbed vs. Released Energy in the Cracking Process of Heterogeneous Materials Under Compression
Carroll, J.D.
108	Evaluation of Microstructure-slip Relationships in BCC Tantalum
227	Relating Strain Fields and Microstructural Factors in Fatigue Crack Growth
Casavola, C.
274	Application of Contouring to Dental Reconstruction
460	Calibration of Barkhausen Noise for Residual Stress Measurement
461	Effects of Strain's Error on Residual Stresses Calculated by HDM
463	Hybrid Characterization of Laminated Wood With ESPI and Optimization Methods
Casem, D.T.
455	Measurements of Particle Velocity within a Kolsky Bar With Applications to Wave Separation
Casperson, M.
227	Relating Strain Fields and Microstructural Factors in Fatigue Crack Growth
Cassenti, B.N.
381	The Application of the Combined Creep and Rate-independent Plasticity Model to Turbine Components Life Prediction
Castro-Ceseņa, A.B.
315	Isolation of Collagen From Cortical Bovine Bone for Preparation of Porous Collagen Sponges
Caulk, J.A.
332	In Situ Dynamics of Electronics Assemblies Under Shock
Cavalli, M.N.
118	Experimental Investigation of Fatigue Behavior of Carbon Fiber Composites Using Fully Reversed Four Point Bending Test
Cellon, K.
374	Mechanics of Multifunctional Skin Structures
Cerreta, E.K.
313	Effect of Temperature on Texture Evolution in Tantalum During Dynamic-extrusion
218	Aluminum and Magnesium Alloy Penetration Damage
212	Influence of Loading Kinetics on the Shock Response of Polycrystalline Copper
Chabal, Y.J.
386	Fracture Between Short Molecules
Chai, G.B.
180	Impact of Aluminum, CFRP Laminates, Fibre-Metal Laminates and Sandwich Panels
Chalivendra, V.B.
252	Detection of Damage of Epoxy Composites Using Carbon Nanotube Network
Chandrasekar, S.
276	Visualization of Material Flow in Machining and Sliding Indentation Processes
Chang, K.
285	Fabrication and Analysis of Small Flapping Wings
Chasiotis, I.
221	Novel Experiments for Large Deformation of Individual Nanoscale Fibers
Chaudhuri, A.
285	Fabrication and Analysis of Small Flapping Wings
Chauhan, P.
554	Assessment of Isothermal Aging on the Thermal Fatigue Strength of Solders
Chazal, C.
140	Stress intensity factors for viscoelastic axisymmetric problems applied to wood
Che, J.W.
119	Thickness Effects on the Thermal Expansion Coefficient of ITO/PET Film
Chen, C.
201	Experimental Characterization and Modeling of the 2024-T3 Aluminum Alloy Under Close-in Blast Loading
Chen, C.C.
78	Failure Characterization of AA 2024 T3 Panel Subjected to Close-In Blast
298	Impulse Plug Measurements of Blast Reflected Impulse at Close Range
Chen, C.Q.
309	Failure Mechanisms in Aluminum Nitride Under Confined Dynamic Loading
Chen, R.
155	Experimental Study on Dynamic Mechanical Properties of a Mock PBX
Chen, S.R.
65	Cyclic Plasticity Under Shock Loading in an HCP Metal
chen, T. Y.-F.
362	An Instantaneous Phase Shifting Digital Shearography System for Dynamic Measurement
Chen, T.P.
10	Microstructure in the FSW Butt Joint of Aluminum Alloy AA5083
Chen, W.
156	What Makes Silly Putty Bounce?
292	Kolsky Tension Bar for Samples with Very Low Strength
366	Mechanical Response of Polycarbonate Nano-Composites as a Function of Strain Rate and Weight Percent of Nano-Silicate Clay Loading
243	Study on Penetration Equation by Experimental Investigation on Penetration into Wax
242	Experimental Investigation on Dynamic Behavior of Ultra High Performance Composite Concrete With Kolsky Bar
168	Inertia Effects in High-rate Compression Experiments of Soft Materials
Chen, W.W.
358	Dynamic Tri-axial Compression Experiments on Cor-Tuf
Chen, X.-M.
430	Radial Mechanical Properties of Boron Nitride Nanotubes
432	Direct Measurement of the Interfacial Strength of PMMA-CNT Interface
Chen, Y.
208	Hardening Behaviour of Thin Wires Under Loading With Strain Gradients
chen, Y. C.
362	An Instantaneous Phase Shifting Digital Shearography System for Dynamic Measurement
Chen, Z.M.
361	Impact Monitoring in Aerospace Panels via Piezoelectric Rosettes
Cheng, J.T.
491	3D Deformations and Shape Measurements of Tympanic Membranes by Multi-wavelength Lensless Digital Holography
483	Mapping the Histology of the Human Tympanic Membrane by Spatial Domain Optical Coherence Tomography
Cheng, T.
489	Digital Holographic Otoscope for Measurements of the Human Tympanic Membrane In-vivo
Cheng, X.X.
96	Film Residual Stress Assessment Method via Temporarily Thermal Relaxation
Chiang, C.C.
190	High Strain Rate Characteristics of Fiber Bragg Grating Strain sensors
Chiang, F.P.
464	Combined Effects of Moisture and UV Radiation on the Mechanics of Carbon Fiber Reinforced Vinylester Composites
Chiang, M.
115	Simultaneous Measurement of the Rates of Polymerization Shrinkage and Elastic Modulus Development
Chiappini, G.
369	Comparison of Contouring Techniques Applied to Sheet Metal Testing
Chiarito, V.P.
156	What Makes Silly Putty Bounce?
Chien, C.H.
119	Thickness Effects on the Thermal Expansion Coefficient of ITO/PET Film
Chindhy, S.
322	Experiments on Hydrogels of Varying Shape
Chocron, S.
363	A New Technique for Monitoring Inhomogeneous Deformation During Flyer Plate Impact
Chona, R.
227	Relating Strain Fields and Microstructural Factors in Fatigue Crack Growth
Chowdhuri, M.A.K.
235	Application of a New Experimental Method to Determine Bi-material Interface Bonding Strength
Christopher, J.J.
26	Injury Potential of Shock Induced Compressive Waves on Human Bone
Chuang, M.-C.
146	The Time Dependent Mechanical Properties of Bovine Enamel
Churnside, A.B.
114	A Precision Force Microscope for Biophysics
Clarke, S.A.
359	Ultra-high-speed Imaging for Explosive-driven Shocks in Transparent Media
Clausen, B.
268	A Comparison of Residual Stress Measurements on Linear Friction Welds Using the Contour Method and Neutron Diffraction
Clavette, P.L.
23	Probabilistic Characterization of Elastic Properties of Composites Using Digital Image Correlation Technique
Clayton, E.H.
352	Characterization of Murine Glioma by Magnetic Resonance Elastography: Preliminary Results
209	The Effects of Noise and Spatial Sampling on Identification of Material Parameters by Magnetic Resonance Elastography
Clements, B.
112	Moderate Velocity Ball Impact of a Mock High-explosive
Cloud, G.L.
556	Some Curious Unresolved Problems, Speculations, and Advances in Mechanical Fastening
Clouet, B.
79	New Composite Timbers, Full Field Analysis of Adhesive Behavior
Cole, D.M.
255	Dynamic Contact Mechanics of Geologic Materials: Experiments, Modeling and Applications
Collins, P.J.
488	Etching Silicon Dioxide for CNT Field Emission Device
Conklin, J.W.
102	Measurement of Metallic Adhesion Force-to-Elongation Profile Under High Separation-Rate Conditions
Connesson, N.
209	The Effects of Noise and Spatial Sampling on Identification of Material Parameters by Magnetic Resonance Elastography
Considine, J.M.
288	Improved Instrumented Indentation of Soft Materials through Surface Deformation Measurements
Conway, A.
511	Comparison of FE and DIC Measurements of a Pi-joint Using Feature Vectors
178	A Study on Damage-induced Behavior of Bonded PI-/T-joints Using Digital Image Correlation (DIC) and FE Modeling
Conway, M.L.
110	Dynamic Measurements With a Luminescent Photoelastic Coating
Cook, R.F.
216	High Confdencee Level Calibration for AFM Based Fracture Testing of Nanobeams
Cooper, R.C.
400	Mechanics of Graphene and Other Two-dimensional Materials
Cooper, W.L.
11	Effect of Particle Size on the Compressive Behavior of Dry Sand Under Confinement at High Strain Rates
Coppieters, S.
191	Multi-axial Quasi-static Strength of a Clinched Sheet Metal Assembly
38	Impact of Lens Distortions on Strain Measurements Obtained With Digital Image Correlation
Corrado, M.
121	Absorbed vs. Released Energy in the Cracking Process of Heterogeneous Materials Under Compression
Costanzo, F.
206	An Immersed Finite Element Method Approach for Brain Biomechanics
Coutu Jr., R.A.
484	Surface Micromachined Contact Support Structure for Microswitch Lifecycle Testing
Coutu, Jr., R.A.
488	Etching Silicon Dioxide for CNT Field Emission Device
487	Silicon Carbide High Temperature MEMS Capacitive Strain Sensor
485	Characterizing External Resistive, Inductive and Capacitive Loads for Micro-switches
486	Characterizing Metal Insulator Transition (MIT) Materials for use as Micro-switch Elements
Crammond, G.
348	Through-thickness Load Transfer in Adhesively Bonded Composite Joints
551	A Methodology for Evaluating Localised Strains Using High Magnification DIC
Crompton, M.
560	A Solution for Making DIC Measurements Across Multiple Measurement Areas With a Single Loading on an Aircraft Undercarriage by Using a new, State-of-the-art Handheld DIC system
Crompton, M.J.
107	An Approach to Strain Measurement Uncertainty for DIC Using the SPOTS Calibration Procedure
Crone, W.C.
322	Experiments on Hydrogels of Varying Shape
Cronin, D.S.
382	High Rate Characterization of Polymeric Closed-Cell Foams: Challenges Related to Size Effects
164	Impact Response of Ballistic Gelatin
26	Injury Potential of Shock Induced Compressive Waves on Human Bone
Crosby, Z.K.
435	Investigation of the Effect of Damage on the Mechanical Response of Salem Limestone at Subjected to Quasi-static and High Rate
Crump, D.A.
350	Investigating High Strain Rate Behaviour of Foams Using Digital Image Correlation
Cui, X.
420	Mechanics and Applications of Light-Activated Polymers
Cusatis, G.
116	Discrete Modeling of Projectile Penetration Into Ultra High Performance Concrete
Dai, L.
150	Rate-Dependent, Large-Displacement Deformation of Vertically Aligned Carbon Nanotube Arrays
Daicos, S.
559	Deformation Field Characterization in Machining Processes Using High- Speed Imaging & Particle Image Velocimetry
Daly, S.
160	Deformation Mapping at the Microstructural Length Scale
166	The Effect of Texture on Superelasticity in Nickel-titanium
D'Amato, M.
420	Mechanics and Applications of Light-Activated Polymers
Daniel, I.M.
233	Characterization and Modeling of Polymeric Matrix Under Static and Dynamic Loading
Danis, M.
79	New Composite Timbers, Full Field Analysis of Adhesive Behavior
Dannemann, K.A.
363	A New Technique for Monitoring Inhomogeneous Deformation During Flyer Plate Impact
Danner, B.L.
486	Characterizing Metal Insulator Transition (MIT) Materials for use as Micro-switch Elements
Daraio, C
91	Dynamics of Multilayered Structures of VACNTs with Metallic Inter-layers
Daraio, C.
555	New Frontiers of Mechanics: Exploiting Nonlinearities in the Design of new Materials
51	Experimental Testing of Micro-particles Collision
80	Topology Optimization in Two-dimensional Highly Nonlinear Granular Crystals With Spherical Intruders
72	Stress Wave Propagation in Highly Nonlinear Two-dimensional Granular Crystals
De Baere, I.
38	Impact of Lens Distortions on Strain Measurements Obtained With Digital Image Correlation
de Boer, M.P.
510	Quantifying Size Effects in Polysilicon Using an In-situ On-chip Test Platform
509	Contamination Thresholds of Pt- and RuO2-coated Microrelays
Debruyne, D.
63	Uncertainty Assessment of DIC Under Heterogeneous Strain States
38	Impact of Lens Distortions on Strain Measurements Obtained With Digital Image Correlation
356	Development of a Test Simulator to Perform Optimized Experiment Design
191	Multi-axial Quasi-static Strength of a Clinched Sheet Metal Assembly
Delale, F.
13	Effect of Low Temperatures on the Ballistic Limit of Hybrid Woven Composites
14	Ballistic Impact on Woven Glass/Epoxy Composites at High and Low Temperatures
Dempsey, J.F.
390	Detailed Measurements of Thread Deformation and Failure in Thin Walled Aluminum Alloy Joints
106	Temperature Dependent Ductile Material Failure Constitutive Modeling With Validation Experiments
Dennis-Koller, D.
212	Influence of Loading Kinetics on the Shock Response of Polycrystalline Copper
Destrebecq, J.F.
86	Determination of stresses in drying wood by means of a viscoelastic relaxation model
DeWald, A.T.
268	A Comparison of Residual Stress Measurements on Linear Friction Welds Using the Contour Method and Neutron Diffraction
Diani, J.
104	Role of Viscoelasticity in Predicting the Shape Memory Effect of Polymers
Dickinson, A.P.
52	Use of Vision-based Methods for Measurement of Mechanical Properties of Exhaust Catalysts
Dishovsky, N.
163	Design of new Elastomeric Matrix Composites: Comparison of Mechanical Properties and Determining Viscoelastic Parameters via Continuous Micro Indentation
Dixit, N.
328	Deformation Twinning in Pure Magnesium at High Strain Rates
Dixon, J.S.
291	Extracting the Mixed-mode Traction-separation Relations of Chip-Package Interfaces
Dobrev, I.T.
490	Design of a Shearography-based Defect Detection System for Structural Health Monitoring
489	Digital Holographic Otoscope for Measurements of the Human Tympanic Membrane In-vivo
Doghri, I.
53	Non-local Damage-enhanced MFH for Multiscale Simulations of Composites
Dragon, A.
189	Temperature- and rate-dependent Failure in Dynamically Loaded Viscoplastic Materials
Drapaca, C.S.
206	An Immersed Finite Element Method Approach for Brain Biomechanics
Dreux, K.
136	Opto-acoustic Technique to Evaluate Adhesion Strength of Nano-scale Systems
Dri, F.
325	Mechanics of the Hierarchical Structure of Cellulose Nanocrystals
Drzal, L.T.
176	Impact Behavior of Composite PI/T-joints With Nano-graphene Adhesives
Dubois, F.
141	Experimental Analysis of the Semi-rigidity Joint in the Standardized Timber Beam
16	Experimental results of green wood slice under natural drying
397	Experimental Characterization of Integral Invariants in Wood Specimen Using the full Field Optical Technique
Dulieu-Barton, J.M.
348	Through-thickness Load Transfer in Adhesively Bonded Composite Joints
380	Damage Assessment in Composite Materials for Remnant Life Prediction
350	Investigating High Strain Rate Behaviour of Foams Using Digital Image Correlation
345	Finite Element Modelling of Pulse Phase Thermography for Defect Detection
444	Characterization of Compressive Properties of Polymer Foam Materials Using DIC and a Modified Arcan Fixture
Dunn, M.
420	Mechanics and Applications of Light-Activated Polymers
Durst, K.
68	Strain-Rate Sensitivity (SRS) of Nickel by Instrumented Indentation
Dutta, A.
521	High-strain Rate Loading Behavior of Seashell Mimetic Composites
301	Evaluating Bolted Joint Strength at High Strain Rates
Edelmann, T.A.
484	Surface Micromachined Contact Support Structure for Microswitch Lifecycle Testing
Efe, M.
276	Visualization of Material Flow in Machining and Sliding Indentation Processes
Ekwaro-Osire, S.
375	Uncertainty in the Dynamics of Gear-pair Fatigue and Fracture
Eliasi, R.
24	Delamination Toughness Tests of DCB Specimens Composed of Woven Composites
Emri, I.
379	Generalization of CFS Methodology
Engelbach, J.A.
352	Characterization of Murine Glioma by Magnetic Resonance Elastography: Preliminary Results
Escobedo, J.P.
212	Influence of Loading Kinetics on the Shock Response of Polycrystalline Copper
Escobedo-Diaz, J.P.
313	Effect of Temperature on Texture Evolution in Tantalum During Dynamic-extrusion
Espinosa, H.D.
476	Nanomechanics of cross-linking molecules identified through in-situ SEM peeling
471	KEYNOTE: Optimal Length Scales Emerging from Shear Load Transfer in Natural Materials and Application to Carbon-based Nanocomposite Design
Esselman, T.
459	Digital Image Correlation Measurements of a Nuclear Reactor Containment Dome During a Structural Integrity Test
Fallin, M.
459	Digital Image Correlation Measurements of a Nuclear Reactor Containment Dome During a Structural Integrity Test
Fan, R.H.
304	HP/HT Hot-wet Resistance of Thermoplastic PEEK and its Composites
Fan, X.
481	Tracking Cortical Surface Deformation Using Stereovision
Fan, Z.
181	Energy Absorption of Sandwich Tubes under Lateral Loading
Farrell, B.
321	Effects of Membrane Composition and Cytoskeletal Proteins on Membrane Mechanics
Feissel, P.
259	Modified Constitutive Relation Error Strategy for Elastic Properties Identification
Feka, P.
464	Combined Effects of Moisture and UV Radiation on the Mechanics of Carbon Fiber Reinforced Vinylester Composites
Feng, Y.
522	Anisotropic Mechanical Properties of Brain Tissue Characterized by Shear and Indentation Tests
Ferreira, L.M.P.
99	Production of Metal Matrix Composites Using Thixinfiltration Techniques
Findeis, D.M.
257	Determining Residual Stresses With the Aid of Optical Interference Techniques
Fischer, D.
467	Rate Dependent Response of Crosslinked Epoxy Networks
Fitzpatrick, J.C.
275	Considerations for Numerical Modeling of Dynamic Behavior of Soft Materials
Fix, R.M.
558	Examples of Residual Stress Measurement With Prism - Hole-drilling and ESPI
Flores, M.
490	Design of a Shearography-based Defect Detection System for Structural Health Monitoring
Flowers, P.F.
136	Opto-acoustic Technique to Evaluate Adhesion Strength of Nano-scale Systems
Foley, J.R.
332	In Situ Dynamics of Electronics Assemblies Under Shock
Fontanari, V.
46	Very High-cycle Fatigue Resistance of Shot Peened High-strength Aluminum Alloys
Forquin, P.
495	Influence of the Confined Behaviour and the Tensile Strength of Concrete Slabs Under Projectile-impact
496	A Testing Technique to Characterise the Shear Behaviour of Concrete at High Strain-rates
Forrestal, M.J.
17	Perforation of Aluminum Plates with 7.62 APM2 Bullets
Foster, J.T.
326	A Priori Pulse Shaper Design for Constant-strain-rate Tests of Elastic-brittle Materials.
Foster, M
416	Initiation Fracture Toughness of Human Cortical Bone as a Function of Loading Rate
Foster, M.
355	Mode I Fracture Response of Polymer Based Gelatins as a Function of Loading Rate
Foulk, J.
351	Void Growth and Coalescence in Aluminum Alloy
Fountzoulas, C.G.
78	Failure Characterization of AA 2024 T3 Panel Subjected to Close-In Blast
82	Material Models Sensitivity of Tungsten-based Penetrators Impacting on Confined Boron-carbide
81	Spinel Modeling Embedded With Small Diameter Surface Transparent Material Particles
Fourman, V.
24	Delamination Toughness Tests of DCB Specimens Composed of Woven Composites
Fournely, E.
144	Simplified Calculation Method of the Torsion Effect on the Seismic Behavior of Timber Buildings
141	Experimental Analysis of the Semi-rigidity Joint in the Standardized Timber Beam
16	Experimental results of green wood slice under natural drying
Fredy, C.
104	Role of Viscoelasticity in Predicting the Shape Memory Effect of Polymers
Frei, M.
289	Simultaneous Measurement of Force and Conductance Across Single Molecule Junctions
Freire, J.L.F
300	Use of Fiber Bragg Grating Strain Gages on a Pipeline Specimen Repaired With a CFRE Composite System
Fruehmann, R.K.
380	Damage Assessment in Composite Materials for Remnant Life Prediction
Frye, J.
412	New Insight into Pile-Up in Thin Film Indentation
Fu, J.
105	Assessment of Corneal Deformation Using Optical Coherence Tomography and Digital Volume Correlation
Fuchs, P.F.
528	Prediction of the Drop Test Performance of Printed Circuit Boards
Fujigaki, M.
454	Dynamic Shape and Strain Measurements of Rotating Tire in Time-series
Fukuda, N.
139	Improvement of Dynamic Properties of PLLA/PBAT Polymer Alloys Using Dialkyl Peroxide
Furlong, C.
491	3D Deformations and Shape Measurements of Tympanic Membranes by Multi-wavelength Lensless Digital Holography
483	Mapping the Histology of the Human Tympanic Membrane by Spatial Domain Optical Coherence Tomography
501	Opto-mechanical Characterization of a MEMS Sensor for Real-time Infrared Imaging
494	Shape and Deformation Measurements by High-resolution Fringe Projection Methods
490	Design of a Shearography-based Defect Detection System for Structural Health Monitoring
489	Digital Holographic Otoscope for Measurements of the Human Tympanic Membrane In-vivo
Furmanski, J.
112	Moderate Velocity Ball Impact of a Mock High-explosive
113	Incipient and Progressive Damage in Polyethylene Under Extreme Tensile Conditions
111	Large-Strain Time-Temperature Equivalence and Adiabatic Heating of Polyethylene
Gaffney, J.
133	Optical Interferometric Study on Loading Hysteresis
Gajendran, H.
368	Solution Approach for Coupled Diffusion-reaction-deformation Problems in Anisotropic Materials
Gale, J.D.
330	Characteristic Length Scale Investigation on the Nanoscale Deformation of Copper
Gallana, I.
323	Size Effects in Biomineralized and Biomimetic Materials
Ganguly, V.
285	Fabrication and Analysis of Small Flapping Wings
Gao, S.
466	ESPI Photoelastic Measurement of All In-Plane Stress Components
Garbow, J.R.
352	Characterization of Murine Glioma by Magnetic Resonance Elastography: Preliminary Results
Gardiner, C.J.
220	Investigating the Aerodynamic Effects of Flexible Membrane Wings
Garmestani, H.
470	Thermal Analyses of Dental Ceramic Restorations
Gastl, S.
184	A Pressure-dependent Nonlinear Viscoelastic Schapery Model for POM
Gates, M.
225	High Performance Digital Volume Correlation for Experimental Mechanics Applications
Gates, R.
216	High Confdencee Level Calibration for AFM Based Fracture Testing of Nanobeams
Gazonas, G.
279	Damage & the Electromechanical Behavior of Piezoelectric Ceramics
Gazonas, G.A.
294	Peridynamic Simulations of Infinite Regions Using a Perfectly Matched Layer
Gdoutos, E.
535	Low CTE Bimetallic Thin Films: Fabrication, Testing and Characterization Challenges
Gdoutos, E.E.
8	Study of Crack Problems by the Optical Method of Caustics
Gdoutou, A.
520	Determination of Three-dimensional Deformation at Small Length Scales
Geers, M.G.D.
405	Enriched Digital Image Correlation to Characterize Geometrically Non-ideal Microbeams
383	Micromechanical Characterization of Ductile Damage in DP Steel
398	Global Digital Image Correlation for Pressure Deflected Membranes
399	Fibrillation Delamination Micro-mechanics in Polymer-metal Interfaces
Geffroy, A.G.
189	Temperature- and rate-dependent Failure in Dynamically Loaded Viscoplastic Materials
Georgas, P.
131	Simultaneous Measurement of Plate Natural Frequencies and Vibration Mode Shapes Using ESPI
Geraldeli, S.
222	Utilizing Digital Image Correlation to Capture Strains in Dental Applications
Gerbig, Y.
216	High Confdencee Level Calibration for AFM Based Fracture Testing of Nanobeams
Gergesova, M.
519	The Algorithm for Closed Form Time-Temperature Superposition
379	Generalization of CFS Methodology
Geubelle, P.H.
250	An Experimental Study on the Wave Propagation Behavior in a 2-D Granular Medium
Ghangrekar, P.
297	Evaluation of Mechanical Properties of Nano-Structured Al6061 Synthesized Using Machining
Ghazi, N.
421	Experimental Investigation of Plastic Strain Recovery in Thin Film Nanocrystalline Metals
Ghosh, P.
194	Indentation and Dynamic Compression Experiments on Microcrystalline and Nanocrystalline Nickel
Giannadakis, K.
193	Viscoelastic and Viscoplastic Behavior of GF/VE [ą45]s Laminates
Gibson, R.F.
179	KEYNOTE: Experimental and Numerical Characterization of Relaxation in Bolted Composite Joints
Gilat, A.
254	Dynamic Load Measurement of Ballistic Gelatin Impact Using an Instrumented Tube
211	Plastic Deformation of Ti-6Al-4V Plate over a Wide Range of Loading Conditions
Gilormini, P.
104	Role of Viscoelasticity in Predicting the Shape Memory Effect of Polymers
Gimzewski, J.K.
58	High Resolution Atomic Force Microscopy With a Fiber Interferometer
452	DNA Molecular Recognition Using AFM Nanometrology
Giuseppetti, A
115	Simultaneous Measurement of the Rates of Polymerization Shrinkage and Elastic Modulus Development
Glauvitz, N.E.
488	Etching Silicon Dioxide for CNT Field Emission Device
Gloeckner, P.J.
52	Use of Vision-based Methods for Measurement of Mechanical Properties of Exhaust Catalysts
Gnanamanickam, E.P.
276	Visualization of Material Flow in Machining and Sliding Indentation Processes
Godfrey, A.
137	Techniques for 3D Non-destructive Grain Orientation Mapping of Polycrystals
Goken, M.
68	Strain-Rate Sensitivity (SRS) of Nickel by Instrumented Indentation
Goldar, D.
49	Measurement of Contact Velocity
Goldstein, R.V.
515	Interface and Contact Effects in Fracture Processes
Golinval, J.-C.
54	Stiction Failure in Microswitches due to Elasto-plastic Adhesive Contact
Golovin, K.B.
52	Use of Vision-based Methods for Measurement of Mechanical Properties of Exhaust Catalysts
Gomi, K.
136	Opto-acoustic Technique to Evaluate Adhesion Strength of Nano-scale Systems
Goodfellow, J.
479	Tree Biomechanics Measurements Using 3D Photogrammetry
Goodson, J.E.
304	HP/HT Hot-wet Resistance of Thermoplastic PEEK and its Composites
Goulbourne, N.C.
514	Deformation Mechanisms in Mn+1AXn Phase Ternary Ceramics at High Strain Rates
Gowrishankar, S.
291	Extracting the Mixed-mode Traction-separation Relations of Chip-Package Interfaces
Grady, M.E.
337	Molecular Tailoring of Interfacial Adhesion Using Self-assembled Monolayers
Grange, S.
106	Temperature Dependent Ductile Material Failure Constitutive Modeling With Validation Experiments
Grange, S.J.
390	Detailed Measurements of Thread Deformation and Failure in Thin Walled Aluminum Alloy Joints
Gray III, G.T.
218	Aluminum and Magnesium Alloy Penetration Damage
313	Effect of Temperature on Texture Evolution in Tantalum During Dynamic-extrusion
Gray, III, G.T.
113	Incipient and Progressive Damage in Polyethylene Under Extreme Tensile Conditions
Grédiac, M.
61	Characterization of the Mechanical Behavior of Sunflower Stem for Bio-composite Applications
60	Application of Full-field Measurements to Analyze the Thermo-mechanical Response of a Three-branch Rubber Specimen
59	Applying the Grid Method to Investigate the Mechanical Behavior of Asphalt
Grierson, D.S.
283	Characterizing the Wear of Diamond-like-carbon Atomic Force Microscope Probes
Grinfeld, M.A.
200	Operational Equations of State for Modeling High-rate Phenomena
Griswold, R.
335	Shock Wave Interaction With Periodic Obstacles
Grosch, D.J.
363	A New Technique for Monitoring Inhomogeneous Deformation During Flyer Plate Impact
Grutzik, S.
216	High Confdencee Level Calibration for AFM Based Fracture Testing of Nanobeams
Gryzagoridis, J.
257	Determining Residual Stresses With the Aid of Optical Interference Techniques
Gubbels, W.
462	Residual Stress Generated by a Wire Electronic Dishcharge Machine cut
Guinault, A.
162	Low Velocity Impact Behaviour of the Epoxy Matrix Composites reinforced with Metallic and Oxide Particles
Gullett, P.M.
435	Investigation of the Effect of Damage on the Mechanical Response of Salem Limestone at Subjected to Quasi-static and High Rate
Gungor, S.
457	Determination of Local Creep Properties in Weldments
Gunnarsson, C.A.
355	Mode I Fracture Response of Polymer Based Gelatins as a Function of Loading Rate
415	Mechanical Response of Friction Stir Welded Aluminum 2139-T8 as a Function of Loading Rate and Stress-state
258	Effect of Strain Rate and Pre-Twist on Strength of Single KevlarŪ KM2 Fiber
370	Fracture Response of Cross-linked Epoxy Resins as a Function of Loading Rate
416	Initiation Fracture Toughness of Human Cortical Bone as a Function of Loading Rate
Guo, C.
25	Long-range Mechanical Force Enables Self-assembly of Epithelial Tubules
Guo, Y.
276	Visualization of Material Flow in Machining and Sliding Indentation Processes
Gupta, S.K.
374	Mechanics of Multifunctional Skin Structures
Gurvich, M.R.
23	Probabilistic Characterization of Elastic Properties of Composites Using Digital Image Correlation Technique
Gwinn, K.
264	Dynamic Fracture Toughness Test Using Hopkinson Bar
Haddadi, H.
480	Microlithography Technique Advantages, Limits and its Coupling With EBSD Measurements
Haftka, R.
285	Fabrication and Analysis of Small Flapping Wings
Haghighi-Abayneh, M.
105	Assessment of Corneal Deformation Using Optical Coherence Tomography and Digital Volume Correlation
Haldar, S.
541	Development and Characterization of Bio-inspired Multifunctional Sandwich Structure
373	Mechanics of Fiber-reinforced Porous Polymer Composites
Hall, R.B.
368	Solution Approach for Coupled Diffusion-reaction-deformation Problems in Anisotropic Materials
Hamed, E.
314	Correlation of Multi-scale Modeling and Experimental Results for the Elastic Moduli of Cortical and Trabecular Bone
Hammer, J.T.
211	Plastic Deformation of Ti-6Al-4V Plate over a Wide Range of Loading Conditions
254	Dynamic Load Measurement of Ballistic Gelatin Impact Using an Instrumented Tube
Hammerberg, A.
400	Mechanics of Graphene and Other Two-dimensional Materials
Hanan, J.C
173	Finite Element Model Generation Based on Stochastic Analysis on AFM Images
Hanan, J.C.
214	Inter-Cellular Joining for Amorphous Honeycombs
299	Performance Evaluation of a Composite Armor Concept by Finite Element Simulations of Ballistic Tests
267	Nanotomography of Polymer Nanocomposite Nanofibers
Haney, E.J.
40	A Fresh look at why Does Spinel Outperforms Sapphire During Ballistic Tests?
Haq, M.
176	Impact Behavior of Composite PI/T-joints With Nano-graphene Adhesives
178	A Study on Damage-induced Behavior of Bonded PI-/T-joints Using Digital Image Correlation (DIC) and FE Modeling
261	Photoelastic Testing and FE Analysis of T-Stub Model
511	Comparison of FE and DIC Measurements of a Pi-joint Using Feature Vectors
Harimkar, S.P.
269	Processing and Characterization of Graphene Reinforced Silicon Carbide Nanocomposites
Harrington, E.
501	Opto-mechanical Characterization of a MEMS Sensor for Real-time Infrared Imaging
Harrington, E.J.
490	Design of a Shearography-based Defect Detection System for Structural Health Monitoring
489	Digital Holographic Otoscope for Measurements of the Human Tympanic Membrane In-vivo
491	3D Deformations and Shape Measurements of Tympanic Membranes by Multi-wavelength Lensless Digital Holography
Harris, N.C.
103	KEYNOTE: Principles Involved in Interpreting Single-Molecule Force Measurement of Biomolecules
Hartov, A.
481	Tracking Cortical Surface Deformation Using Stereovision
Hassan, A.
386	Fracture Between Short Molecules
Hay, J.L.
68	Strain-Rate Sensitivity (SRS) of Nickel by Instrumented Indentation
69	Micron-scale Measurement of the Complex Modulus of gel by Dynamic Indentation
Hazra, S.S.
510	Quantifying Size Effects in Polysilicon Using an In-situ On-chip Test Platform
Heard, W.
242	Experimental Investigation on Dynamic Behavior of Ultra High Performance Composite Concrete With Kolsky Bar
358	Dynamic Tri-axial Compression Experiments on Cor-Tuf
Heath, M.
225	High Performance Digital Volume Correlation for Experimental Mechanics Applications
Heckert, N.A.
237	Tensile Behavior of Single PPTA Fibers Measured by the Kolsky bar Using the Direct Fiber Clamping Methodđ
Hefti, P.
490	Design of a Shearography-based Defect Detection System for Structural Health Monitoring
Helfen, L.
251	Feasibility Study of 3D Digital Volume Correlation of Synchrotron Radiation Laminography Data for Displacement Field Measurement During Ductile Crack initiation
Heltai, L.
206	An Immersed Finite Element Method Approach for Brain Biomechanics
Heyns, P.S.
504	Crack Growth Prediction Using the LEFM-based Cracked Beam Element
Hild, F.
83	KEYNOTE: On the Resolution of Local and Global DIC Approaches
84	Artifact Correction for DVC Measurements Using A Laboratory X-ray Source
398	Global Digital Image Correlation for Pressure Deflected Membranes
251	Feasibility Study of 3D Digital Volume Correlation of Synchrotron Radiation Laminography Data for Displacement Field Measurement During Ductile Crack initiation
213	CAD-based Calibration of a 3D DIC System
Hill, M.R.
268	A Comparison of Residual Stress Measurements on Linear Friction Welds Using the Contour Method and Neutron Diffraction
453	Simulation of Triaxial Residual Stress Mapping for a Hollow Cylinder
Hilton, H.H.
265	Viscoelastic Creep Compliance Using Prony Series and Spectrum Function Approach
Hines, M.A.
216	High Confdencee Level Calibration for AFM Based Fracture Testing of Nanobeams
Hoefnagels, J.P.M.
383	Micromechanical Characterization of Ductile Damage in DP Steel
405	Enriched Digital Image Correlation to Characterize Geometrically Non-ideal Microbeams
398	Global Digital Image Correlation for Pressure Deflected Membranes
399	Fibrillation Delamination Micro-mechanics in Polymer-metal Interfaces
Hoenigman, M.
479	Tree Biomechanics Measurements Using 3D Photogrammetry
Hojjatie, B.
470	Thermal Analyses of Dental Ceramic Restorations
Hokka, M.
62	Dynamic Behavior and Numerical Modeling of Titanium 15-3-3-3 Alloy
Holmes, G.A.
237	Tensile Behavior of Single PPTA Fibers Measured by the Kolsky bar Using the Direct Fiber Clamping Methodđ
Holzworth, K.
230	Hybrid Polymer Grafted Nanoparticle Composites for Blast-induced Shock-wave Mitigation
228	Milled Glass Reinforced Polyurea Composites: the Effect of Surface Treatment
Hone, J.
400	Mechanics of Graphene and Other Two-dimensional Materials
Hong, Y.
41	Pressure-deformation-injury Maps for Brain Tissue Subjected to High Rate Loading
Hoover, D.
133	Optical Interferometric Study on Loading Hysteresis
Hopkins, M.A.
255	Dynamic Contact Mechanics of Geologic Materials: Experiments, Modeling and Applications
Horn, G.P.
340	Development and Control of Residual Stresses in Buried Cavities for MEMS Applications
286	Utilizing Knots to Reduce Dynamic Loads in Fire Service Rope Systems
Horstemeyer, M.F.
143	Formulation and Validation of a Thermomechanical Viscoelastic/Viscoplastic Constitutive Model for Amorphous Glassy Polymer
142	Formulation a Thermomechanical Internal State Variable Constitutive Model for Elastomers
Hosseinian, E
210	A Versatile Microelectromechanical System for Fatigue Testing of Nanostructures
Hsu, F.C.
94	Design and Development of Internal Friction and Energy Loss Measurement on Nanocrystalline Aluminum Thin Films
Hsueh, C.H.
452	DNA Molecular Recognition Using AFM Nanometrology
Hu, G.
309	Failure Mechanisms in Aluminum Nitride Under Confined Dynamic Loading
305	3D Mechanism-based Modeling of the Dynamic Failure of Brittle Materials
Hu, T.C.
94	Design and Development of Internal Friction and Energy Loss Measurement on Nanocrystalline Aluminum Thin Films
Huang, R.
291	Extracting the Mixed-mode Traction-separation Relations of Chip-Package Interfaces
Huang, X.
137	Techniques for 3D Non-destructive Grain Orientation Mapping of Polycrystals
Hubner, J.P.
109	A Novel Method to Attach Membranes Uniformly on MAV wings
110	Dynamic Measurements With a Luminescent Photoelastic Coating
Hudspeth, M.
525	Mechanical Properties of Major and Minor Ampullate Spider Silks
Hudspeth, M.C.
292	Kolsky Tension Bar for Samples with Very Low Strength
Huh, H.
320	Micro-Tensile Tests of Aluminum Thin Foil With the Variation of Strain Rate
Huh, J.H.
320	Micro-Tensile Tests of Aluminum Thin Foil With the Variation of Strain Rate
Humburg, H.
236	Biomimetic Tapered Fibers for Enhanced Composite Toughness
Hung, C.M.
10	Microstructure in the FSW Butt Joint of Aluminum Alloy AA5083
Hurst, A.
400	Mechanics of Graphene and Other Two-dimensional Materials
Huskins, E.L.
302	Microstructure Evolution of UFG Al-1100 During High Temperature Kolsky Bar Experiments
Hwang, C.H
203	Measurement of Low Level Stress by Integrating Photoelasticity and Spectrometry
Hybertsen, M.S.
289	Simultaneous Measurement of Force and Conductance Across Single Molecule Junctions
Ichihara, H.
139	Improvement of Dynamic Properties of PLLA/PBAT Polymer Alloys Using Dialkyl Peroxide
Ifju, P.
285	Fabrication and Analysis of Small Flapping Wings
222	Utilizing Digital Image Correlation to Capture Strains in Dental Applications
Ifju, P.G.
109	A Novel Method to Attach Membranes Uniformly on MAV wings
220	Investigating the Aerodynamic Effects of Flexible Membrane Wings
Isaacs, J.B.
335	Shock Wave Interaction With Periodic Obstacles
Ishbir, C.
24	Delamination Toughness Tests of DCB Specimens Composed of Woven Composites
Ito, H.
139	Improvement of Dynamic Properties of PLLA/PBAT Polymer Alloys Using Dialkyl Peroxide
Iwaskiw, A.S.
296	Determination of Simple Shear Material Properties of the Brain at High Strain Rates
Izawa, S.
195	Load History Dependency of Plastic Collapse Behavior of Cracked Piping
Jajam, K.C.
207	Is Nano Always Better? Static and Dynamic Fracture Study of Particulate Polymer Composites
Jaremko, M.J.
312	Porous Hydroxyapatite-polyhydroxybutyrate Composites Fabricated by a Novel Method via Centrifugation
Jasiuk, I.
314	Correlation of Multi-scale Modeling and Experimental Results for the Elastic Moduli of Cortical and Trabecular Bone
Jayakumar, B.
299	Performance Evaluation of a Composite Armor Concept by Finite Element Simulations of Ballistic Tests
214	Inter-Cellular Joining for Amorphous Honeycombs
Jeng, Y.-R.
146	The Time Dependent Mechanical Properties of Bovine Enamel
Jenkins, M.G.
130	Experimental, Numerical and Analytical Evaluation of Structural Integrity of Experiment Container Subjected to Reduced Gravity Flight Testing
Jhuang, Y.D.
119	Thickness Effects on the Thermal Expansion Coefficient of ITO/PET Film
Ji, S.
481	Tracking Cortical Surface Deformation Using Stereovision
Jia, Z.
228	Milled Glass Reinforced Polyurea Composites: the Effect of Surface Treatment
245	Polyurea-based Composites: Ultrasonic Testing and Dynamic Mechanical Properties Modeling
Jin, H.
351	Void Growth and Coalescence in Aluminum Alloy
Joffe, R.
193	Viscoelastic and Viscoplastic Behavior of GF/VE [ą45]s Laminates
128	Nonlinear Behavior of Natural Fiber/bio-based Matrix Composites
34	Characterization and Analysis of Time Dependent Behavior of Bio-based Composites Made out of Highly Non-Linear Constituents
Johansen, R.
459	Digital Image Correlation Measurements of a Nuclear Reactor Containment Dome During a Structural Integrity Test
Johnson, G.
351	Void Growth and Coalescence in Aluminum Alloy
Johnson, H.T
340	Development and Control of Residual Stresses in Buried Cavities for MEMS Applications
Johnson, J.A.
87	Development of a Quantitative Mechanical Test of Atherosclerotic Plaque Stability
Johnston, A.A.
371	KEYNOTE: Composite Joint Research at the National Research Council Canada
Jones, A.
549	Interfacial Self-healing for Advanced Composites
Jones, E.
318	In Situ Strain Measurement in Anodes in Lithium-ion Batteries
Jonnalagadda, K.N.
194	Indentation and Dynamic Compression Experiments on Microcrystalline and Nanocrystalline Nickel
187	Mechanical Behavior of SS 304LN at High Strain Rates in Compression
Jordan, J.L.
19	Comparison of Mechanical Properties of Polymer-based Multi-phase Particulate Composites
Jordan, K.
430	Radial Mechanical Properties of Boron Nitride Nanotubes
Jorge, A.F.
99	Production of Metal Matrix Composites Using Thixinfiltration Techniques
Joseph, B.D.
478	Evaluation of Surface Preparation Techniques for Composite Bonded Joints
Joseph, J.
150	Rate-Dependent, Large-Displacement Deformation of Vertically Aligned Carbon Nanotube Arrays
Joshi, S.
238	Experiments and Modeling of Microcompression of Single-crystal Magnesium
Joshi, S.P.
393	Energy Dissipation Mechanism in Nanocomposites Studied via Molecular Dynamics Simulation
Justice, R.S.
503	KEYNOTE: Structural to Multifunctional: Developments in Adaptive and Active Composite and Hybrid Materials
Kaartinen, M.T.
290	Direct Measurements of the Cohesive Behavior of Soft Biological Interfaces
Kaliyanda, A.R.
334	Thermoelastic Stress Analysis of Mechanical Fasteners
Kammers, A.
516	The Effect of Grain Size on Strain Localization in Aluminum
Kammers, A.D.
160	Deformation Mapping at the Microstructural Length Scale
Kao, P.
419	Time Dependent Recovery of Shape Memory Polymer Composites with Magnetic Particles
Karkkainen, R.L.
66	Nano-scale Investigation of Microstructural Phenomenon Contributing to Toughening of Nanoparticulate Reinforced Polymers
Katundi, D.
162	Low Velocity Impact Behaviour of the Epoxy Matrix Composites reinforced with Metallic and Oxide Particles
153	Experimental Study of High Speed Ball End milling of Titanium Alloy (Ti-6Al-4V)
Ke, C.-H.
432	Direct Measurement of the Interfacial Strength of PMMA-CNT Interface
430	Radial Mechanical Properties of Boron Nitride Nanotubes
431	Engineering Radial Deformations in Single-walled Carbon and Boron-nitride Nanotubes
Kelber, S.
159	Mass Spectrometry With Nanoelectromechanical Systems
Kelso, M.
449	Brain Mechanical Imaging (BMI)
Khaja Mohiddin, S.M.
226	Study of Damage Evolution During Fatigue of Composites Using DIC
Khaja, A.A.
334	Thermoelastic Stress Analysis of Mechanical Fasteners
Khandaker, M.
409	Evaluation of Composite Bone Cement for Orthopedic Applications
410	Mechanical Characterization of Polyethylene Dlycol Diacrylate (PEGDA) for Tissue Engineering Applications
Khatibzadeh, N.
321	Effects of Membrane Composition and Cytoskeletal Proteins on Membrane Mechanics
Khayer Dastjerdi, A.
290	Direct Measurements of the Cohesive Behavior of Soft Biological Interfaces
239	Interfacial Fracture Toughness of Nacre
Kiang, C.
103	KEYNOTE: Principles Involved in Interpreting Single-Molecule Force Measurement of Biomolecules
Kiani, M.
411	Using Experimental Data to Improve Crash Modeling for Composite Materials
Kidane, A.
439	A new Approach to Determine the Quasi-static and Dynamic Fracture Toughness of Engineering Materials
Kim, H.
361	Impact Monitoring in Aerospace Panels via Piezoelectric Rosettes
Kim, H.I.
56	Atmospheric Plasma Treatment of Fiber-reinforced Composites for Adhesive Bonding
Kim, J.H.
237	Tensile Behavior of Single PPTA Fibers Measured by the Kolsky bar Using the Direct Fiber Clamping Methodđ
Kim, J.S.
320	Micro-Tensile Tests of Aluminum Thin Foil With the Variation of Strain Rate
Kim, K.B.
166	The Effect of Texture on Superelasticity in Nickel-titanium
Kim, T.
389	High-Loading-rate Energy Capture in Nanoenvironment
Kimberley, J.
305	3D Mechanism-based Modeling of the Dynamic Failure of Brittle Materials
306	Early Stage Damage Propagation in Hypervelocity Impacts on Brittle Materials
King, G.M.
114	A Precision Force Microscope for Biophysics
King, M.A.
41	Pressure-deformation-injury Maps for Brain Tissue Subjected to High Rate Loading
Kingsbury, C.M.
317	Multiscale Modeling of Mechanoresponsive Polymers
Kirchdoerfer, T.T.
363	A New Technique for Monitoring Inhomogeneous Deformation During Flyer Plate Impact
Kisailus, D.
346	High Performance Impact-tolerant and Abrasion-resistant Materials: Lessons From Nature
Kjolby, R.H.
452	DNA Molecular Recognition Using AFM Nanometrology
Klusemann, B.
97	Modeling of Sheet Metals With Coarse Texture via Crystal Plasticity
Knauss, W.G.
498	KEYNOTE: Free Volume and Rate/Temperature-Sensitive Yield-like Behavior of Rigid Polymers
262	Experimental Investigation of Failure in Viscoelastic Elastomers Under Combined Shear and Pressure
Knorr, A.F.
97	Modeling of Sheet Metals With Coarse Texture via Crystal Plasticity
Knorr, D.
370	Fracture Response of Cross-linked Epoxy Resins as a Function of Loading Rate
467	Rate Dependent Response of Crosslinked Epoxy Networks
Kobayashi, D.
90	Dynamic Thermal Deformation Measurement Technique for Large-scale High Temperature Piping
Kobayashi, H.
237	Tensile Behavior of Single PPTA Fibers Measured by the Kolsky bar Using the Direct Fiber Clamping Methodđ
Kobayashi, M.
364	3D/4D Strain Mapping Using In-situ X-ray Microtomography
Kody, A.
523	Simulation of Structural Damage on the Dowling Hall Footbridge
Kolluru, P.V.
221	Novel Experiments for Large Deformation of Individual Nanoscale Fibers
Komanduri, R.
11	Effect of Particle Size on the Compressive Behavior of Dry Sand Under Confinement at High Strain Rates
Korach, C.S.
465	Effect of Crystallite Orientation on Nanomechanical Properties of a Nanostructured poly(KAMPS)/aragonite Composite
464	Combined Effects of Moisture and UV Radiation on the Mechanics of Carbon Fiber Reinforced Vinylester Composites
Kosecki, A.
162	Low Velocity Impact Behaviour of the Epoxy Matrix Composites reinforced with Metallic and Oxide Particles
Kosel, F.
562	Ultra High Speed Cerberus Multi Head Imaging System for 3D and D.I.C. Applications
Kovalchick, C.
185	Cohesive Zone Law Extraction From an Experimental Peel Test
148	Application of Projection Moiré in Electronic Packaging and Assembly for Post-surface Mount Warpage Measurements
Koys, T.M.
537	A Thin Shell Inflation Test Method for Anisotropic Human Skin Tissues
Kraft, O.
208	Hardening Behaviour of Thin Wires Under Loading With Strain Gradients
Kramer, S.B.
317	Multiscale Modeling of Mechanoresponsive Polymers
Kramer, S.L.B.
240	Simultaneous Observation of Phase-Stepped Photoelastic Images Using Diffraction Gratings
Kreis, T.
456	KEYNOTE: Recent Advances in Holographic Strain and Stress Measurement
Krische, M.J
386	Fracture Between Short Molecules
Krishnan, A.
44	Fish-tank Approach to Evaluate Dynamic Failure and Durability of Marine Composites
42	New Shear Fracture Test for Mode II Fracture Toughness Measurement
43	Failure due to Notch and Interface Interaction in Bi-material Joints
Kriven, W.M.
414	Processing, Microstructure, and Properties of Carbon Nanotube Reinforced Silicon Carbide
Kujawski, M.
374	Mechanics of Multifunctional Skin Structures
Kumar, H.
188	Design & Development of Ring Shaped Force Transducers
Kumar, P.
198	Response of Curved Carbon Composite Panels to Shock Loading
Kumar, S.
188	Design & Development of Ring Shaped Force Transducers
Kuokkala, V.-T.
62	Dynamic Behavior and Numerical Modeling of Titanium 15-3-3-3 Alloy
Kurath, P.
286	Utilizing Knots to Reduce Dynamic Loads in Fire Service Rope Systems
Kushvaha, V.
205	Effect of Filler Particle Shape on Dynamic Fracture Behavior of Glass-filled Epoxy
Kwon, J.B.
320	Micro-Tensile Tests of Aluminum Thin Foil With the Variation of Strain Rate
Kysar, J.W.
421	Experimental Investigation of Plastic Strain Recovery in Thin Film Nanocrystalline Metals
417	Spatial Distribution of net Burgers Density Vector in a Deformed Single Crystal
418	Digital Image Correlation (DIC) to determine stress and strain of a nanowire loaded with a MEMS actuator in a Scanning Electron Microscope
400	Mechanics of Graphene and Other Two-dimensional Materials
Labesse-Jied, F.
140	Stress intensity factors for viscoelastic axisymmetric problems applied to wood
Lacevic, N.M.
393	Energy Dissipation Mechanism in Nanocomposites Studied via Molecular Dynamics Simulation
Lachambre, J.
100	3D Analysis of a Fatigue Crack in Cast Iron Using Digital Volume Correlation of X-ray Tomographic Images
Lacidogna, G.
199	Damage Assessment in Syracuse Limestone Specimens by Frequency Analysis of Elastic Emissions
138	Time Correlation Between Acoustic, Electromagnetic and Neutron Emissions in Rocks Under Compression
121	Absorbed vs. Released Energy in the Cracking Process of Heterogeneous Materials Under Compression
LaCroix, B.
220	Investigating the Aerodynamic Effects of Flexible Membrane Wings
222	Utilizing Digital Image Correlation to Capture Strains in Dental Applications
Lam, M.L.
452	DNA Molecular Recognition Using AFM Nanometrology
Lamberson, L.E.
279	Damage & the Electromechanical Behavior of Piezoelectric Ceramics
Lamberti, L.
123	KEYNOTE: Recent Developments in the Contouring of Surfaces
274	Application of Contouring to Dental Reconstruction
244	Optical Head as a Gauge Device in Manufacturing
246	KEYNOTE: Optical Fourier Transforms in the Nano Range
Lambros, J.
225	High Performance Digital Volume Correlation for Experimental Mechanics Applications
250	An Experimental Study on the Wave Propagation Behavior in a 2-D Granular Medium
248	Dynamic Elasto-plastic Contact Behavior of Dimer Granular Pairs
227	Relating Strain Fields and Microstructural Factors in Fatigue Crack Growth
Landau, P.
472	Is Adiabatic Shear Failure Really Adiabatic?
Lansdorp, B.M.
311	Optimized Calibration for Single-molecule Instruments
329	High Speed Magnetic Tweezers at 10,000 fps With Reflected Hg-lamp Illumination
Lanza di Scalea, F.
361	Impact Monitoring in Aerospace Panels via Piezoelectric Rosettes
Lapusta, Y.
140	Stress intensity factors for viscoelastic axisymmetric problems applied to wood
Larbi, A.
162	Low Velocity Impact Behaviour of the Epoxy Matrix Composites reinforced with Metallic and Oxide Particles
Lasalvia, J.C.
82	Material Models Sensitivity of Tungsten-based Penetrators Impacting on Confined Boron-carbide
Lava, P.
63	Uncertainty Assessment of DIC Under Heterogeneous Strain States
191	Multi-axial Quasi-static Strength of a Clinched Sheet Metal Assembly
38	Impact of Lens Distortions on Strain Measurements Obtained With Digital Image Correlation
356	Development of a Test Simulator to Perform Optimized Experiment Design
Lavernhe, S.
213	CAD-based Calibration of a 3D DIC System
Lavernhe-Taillard, K.
213	CAD-based Calibration of a 3D DIC System
Lawrence, W.
298	Impulse Plug Measurements of Blast Reflected Impulse at Close Range
Le Cam, J.-B.
60	Application of Full-field Measurements to Analyze the Thermo-mechanical Response of a Three-branch Rubber Specimen
Le Louedec, G.
95	Identification of the Heterogeneous Elasto-plastic Behaviour of FSW Welds at High Strain Rate
Leble, B.
189	Temperature- and rate-dependent Failure in Dynamically Loaded Viscoplastic Materials
Lee, G.H.
400	Mechanics of Graphene and Other Two-dimensional Materials
Lee, J.-H.
333	Laser Generation and Double-exposure Imaging of Hypervelocity Micro-projectiles
Lee, M.Z.
50	Using Stokes Polarimeter for Linear Birefringence and Dichroism in Ferrofluid
Lee, P.V.S.
31	Quasi-static Compressive and Tensile Test on Cancellous Bone in Human Cervical Spine
Lee, S.
312	Porous Hydroxyapatite-polyhydroxybutyrate Composites Fabricated by a Novel Method via Centrifugation
Lee, S.J.
41	Pressure-deformation-injury Maps for Brain Tissue Subjected to High Rate Loading
Leemet, T.
62	Dynamic Behavior and Numerical Modeling of Titanium 15-3-3-3 Alloy
Legzdina, D.
268	A Comparison of Residual Stress Measurements on Linear Friction Welds Using the Contour Method and Neutron Diffraction
Leigh, S.D.
237	Tensile Behavior of Single PPTA Fibers Measured by the Kolsky bar Using the Direct Fiber Clamping Methodđ
Lenhart, J.
355	Mode I Fracture Response of Polymer Based Gelatins as a Function of Loading Rate
370	Fracture Response of Cross-linked Epoxy Resins as a Function of Loading Rate
Lenhart, J.L.
467	Rate Dependent Response of Crosslinked Epoxy Networks
468	Challenges for Implementing Polymer Gels in Defense Applications
Leonard, A.
72	Stress Wave Propagation in Highly Nonlinear Two-dimensional Granular Crystals
León-Rodríguez, M.
73	Digital Holographic Microscopy by Mirau Interferometric Objective
Lesman, A.
29	Quantification of Cellular Tractions in a Fibrin Matrix Using 3D TFM
Lessner, S.M.
87	Development of a Quantitative Mechanical Test of Atherosclerotic Plaque Stability
Li, B.
12	Effect of Stress Relief Process on Mechanical Performance of MP35N Cable as Lead Conductor in Medical Device
Li, D.
346	High Performance Impact-tolerant and Abrasion-resistant Materials: Lessons From Nature
Li, J.
548	On-machine Shape Measurement Method With Grooving Using Grating Projection
314	Correlation of Multi-scale Modeling and Experimental Results for the Elastic Moduli of Cortical and Trabecular Bone
Li, J.J.
119	Thickness Effects on the Thermal Expansion Coefficient of ITO/PET Film
Li, L.
499	The Surface Tribological and Mechanical Behaviors of Silicone-based Hydrogel Materials
Li, X.Y.
223	Effect of Loading Rate on Tensile Properties of Three Steels
Li, Y.
409	Evaluation of Composite Bone Cement for Orthopedic Applications
Liao, H.
156	What Makes Silly Putty Bounce?
Liao, H.T.
464	Combined Effects of Moisture and UV Radiation on the Mechanics of Carbon Fiber Reinforced Vinylester Composites
Liaw, B.
13	Effect of Low Temperatures on the Ballistic Limit of Hybrid Woven Composites
22	Thickness Effect on Cross-ply GLARE 5 FML Beams Subjected to Ballistic Impact
21	Damage Assessments of Ballistic Impact Behaviors of GLARE 5 (3/2) Beams with Various Stacking Sequences
20	Ballistic Impact Behaviors of GLARE 5 Fiber-Metal Laminated Plates
14	Ballistic Impact on Woven Glass/Epoxy Composites at High and Low Temperatures
Liechti, K.
387	Molecular Adhesion
Liechti, K.M.
291	Extracting the Mixed-mode Traction-separation Relations of Chip-Package Interfaces
303	A Thermodynamic State Driven Nonlinear Viscoelastic Constitutive Model
Liew, L.A.
15	MEMS Device for Fatigue Testing 25 Micrometer Thick Aluminum Specimens
Limodin, N.
84	Artifact Correction for DVC Measurements Using A Laboratory X-ray Source
Lin, J.F.
50	Using Stokes Polarimeter for Linear Birefringence and Dichroism in Ferrofluid
Lin, J.Y.
119	Thickness Effects on the Thermal Expansion Coefficient of ITO/PET Film
Lin, M.T.
94	Design and Development of Internal Friction and Energy Loss Measurement on Nanocrystalline Aluminum Thin Films
Lin, T.-W.
340	Development and Control of Residual Stresses in Buried Cavities for MEMS Applications
Lin, W.B.
10	Microstructure in the FSW Butt Joint of Aluminum Alloy AA5083
Lin, W.H.
51	Experimental Testing of Micro-particles Collision
Lin, W.-H.
542	Experimental System for the Study of Dynamic Contact Between Microparticles
Lin, W.J.
190	High Strain Rate Characteristics of Fiber Bragg Grating Strain sensors
Lin, W.T.
119	Thickness Effects on the Thermal Expansion Coefficient of ITO/PET Film
Lin, Y.L.
223	Effect of Loading Rate on Tensile Properties of Three Steels
155	Experimental Study on Dynamic Mechanical Properties of a Mock PBX
Liou, N.-S.
146	The Time Dependent Mechanical Properties of Bovine Enamel
Littell, J.
443	Photogrammetry Measurements During a Tanking Test on the Space Shuttle External Tank, ET-137
Liu, H.
170	Equation of State of Explosive Detonation Products
171	Interaction Between Oxygen and Carbon Dioxide at High Pressure and Temperature
Liu, H.H.
137	Techniques for 3D Non-destructive Grain Orientation Mapping of Polycrystals
Liu, J.
531	The Impact Behavior of Tetrahedral Truss Lattice Structures
283	Characterizing the Wear of Diamond-like-carbon Atomic Force Microscope Probes
Liu, J.F.
30	A Miniature Impact Tester for Dynamic Testing of Small Specimens
31	Quasi-static Compressive and Tensile Test on Cancellous Bone in Human Cervical Spine
Liu, P.
409	Evaluation of Composite Bone Cement for Orthopedic Applications
Lo, Y.L.
557	Robust Rotation-unwrapping Algorithm for Problems of Holes and Noise
172	Extracting Cell Gap, Twisted and Pretilt Angles of TNLC Cells by Effective Parameters using Stokes Polarimetry
Long, K.
420	Mechanics and Applications of Light-Activated Polymers
Longere, P.
189	Temperature- and rate-dependent Failure in Dynamically Loaded Viscoplastic Materials
Losego, M.D.
337	Molecular Tailoring of Interfacial Adhesion Using Self-assembled Monolayers
Love, B.
415	Mechanical Response of Friction Stir Welded Aluminum 2139-T8 as a Function of Loading Rate and Stress-state
Lu, F.Y.
223	Effect of Loading Rate on Tensile Properties of Three Steels
155	Experimental Study on Dynamic Mechanical Properties of a Mock PBX
Lu, G.
171	Interaction Between Oxygen and Carbon Dioxide at High Pressure and Temperature
169	Molecular Dynamics Simulation on Plastic Deformation of Nanocrystalline Copper
170	Equation of State of Explosive Detonation Products
181	Energy Absorption of Sandwich Tubes under Lateral Loading
Lu, H.
11	Effect of Particle Size on the Compressive Behavior of Dry Sand Under Confinement at High Strain Rates
Lu, W.
491	3D Deformations and Shape Measurements of Tympanic Membranes by Multi-wavelength Lensless Digital Holography
389	High-Loading-rate Energy Capture in Nanoenvironment
Lu, W.Y.
351	Void Growth and Coalescence in Aluminum Alloy
Lu, W.-Y.
264	Dynamic Fracture Toughness Test Using Hopkinson Bar
57	Preloaded High-rate Tension Techniques
Lu, Y.C.
150	Rate-Dependent, Large-Displacement Deformation of Vertically Aligned Carbon Nanotube Arrays
Luo, H.
11	Effect of Particle Size on the Compressive Behavior of Dry Sand Under Confinement at High Strain Rates
Maier, V.
68	Strain-Rate Sensitivity (SRS) of Nickel by Instrumented Indentation
Maji, A.K.
3	Nano-Macro Correlation of Nano-Silica Concrete
Makinen, J.
340	Development and Control of Residual Stresses in Buried Cavities for MEMS Applications
Malacara-Hernandez, D.
458	KEYNOTE: Wavefront Retrieval from Radial Hartmann Patterns
Maloney, C.
85	Blast Overpressure Effects on Bio-mechanical Systems
Manuello, A.
138	Time Correlation Between Acoustic, Electromagnetic and Neutron Emissions in Rocks Under Compression
Mao, J.
474	Cylindrical Bending of Bonded Layered Thick Composites
475	A Model for Fracture Characterization of Adhesively-Bonded Joints
Marianetti, C.A.
400	Mechanics of Graphene and Other Two-dimensional Materials
Marin, E.B.
143	Formulation and Validation of a Thermomechanical Viscoelastic/Viscoplastic Constitutive Model for Amorphous Glassy Polymer
Marsh, C.P.
414	Processing, Microstructure, and Properties of Carbon Nanotube Reinforced Silicon Carbide
Marteau, J.
480	Microlithography Technique Advantages, Limits and its Coupling With EBSD Measurements
Martin, B.
242	Experimental Investigation on Dynamic Behavior of Ultra High Performance Composite Concrete With Kolsky Bar
358	Dynamic Tri-axial Compression Experiments on Cor-Tuf
Martinez, D.T.
218	Aluminum and Magnesium Alloy Penetration Damage
113	Incipient and Progressive Damage in Polyethylene Under Extreme Tensile Conditions
313	Effect of Temperature on Texture Evolution in Tantalum During Dynamic-extrusion
Martini, A.
325	Mechanics of the Hierarchical Structure of Cellulose Nanocrystals
Maschmann, M.
150	Rate-Dependent, Large-Displacement Deformation of Vertically Aligned Carbon Nanotube Arrays
Masud, A.
368	Solution Approach for Coupled Diffusion-reaction-deformation Problems in Anisotropic Materials
Mathias, J.D.
61	Characterization of the Mechanical Behavior of Sunflower Stem for Bio-composite Applications
Mathieu, F.
526	Stress Intensity Factor Extraction in a 3D Crack Propagation Experiment
Matsubara, M.
195	Load History Dependency of Plastic Collapse Behavior of Cracked Piping
McAllister, A.
148	Application of Projection Moiré in Electronic Packaging and Assembly for Post-surface Mount Warpage Measurements
McCauley, J.W.
309	Failure Mechanisms in Aluminum Nitride Under Confined Dynamic Loading
McClung, A.J.W.
241	Relaxation and Recovery Behavior of an Epoxy Based Shape Memory Polymer Resin
McDonough, W.G.
237	Tensile Behavior of Single PPTA Fibers Measured by the Kolsky bar Using the Direct Fiber Clamping Methodđ
McKee, M.D.
290	Direct Measurements of the Cohesive Behavior of Soft Biological Interfaces
McKittrick, J.
315	Isolation of Collagen From Cortical Bovine Bone for Preparation of Porous Collagen Sponges
314	Correlation of Multi-scale Modeling and Experimental Results for the Elastic Moduli of Cortical and Trabecular Bone
312	Porous Hydroxyapatite-polyhydroxybutyrate Composites Fabricated by a Novel Method via Centrifugation
McMillan, M.D.
37	Simulation of Interference Fitted Joint Strength as Used in Hot Rolling Work Rolls
McWilliams, B.A.
67	Effect of Particle Size Distribution on the Response of Metal-matrix Composites
Meite, M.
397	Experimental Characterization of Integral Invariants in Wood Specimen Using the full Field Optical Technique
Melis, M.
479	Tree Biomechanics Measurements Using 3D Photogrammetry
443	Photogrammetry Measurements During a Tanking Test on the Space Shuttle External Tank, ET-137
Merchant, S.N.
491	3D Deformations and Shape Measurements of Tympanic Membranes by Multi-wavelength Lensless Digital Holography
Merkle, A.C.
296	Determination of Simple Shear Material Properties of the Brain at High Strain Rates
Meuris, B.J.
365	Thermal Analysis of PZT Thin Films Using Digital Image Correlation
Meyer, C.S.
360	Numerical Simulations of the Mechanical Behavior of Adobe
Meyers, M.
502	KEYNOTE: Biological Materials and Mechanics: An Overview
Meyers, M.A.
312	Porous Hydroxyapatite-polyhydroxybutyrate Composites Fabricated by a Novel Method via Centrifugation
Miller, P.
543	Effect of Confinement on Laser-induced Stress Waves
Min, K.
317	Multiscale Modeling of Mechanoresponsive Polymers
Mishra, B.
452	DNA Molecular Recognition Using AFM Nanometrology
Mishra, K
270	Reinforcement Of Epoxy Resins With POSS For Enhancing Fracture Toughness At Cryogenic Temperature
Miyano, Y.
74	Long Term Life Prediction of CFRP Laminates Under Wet Condition
Miyasaka, C.
117	Quantitative Evaluation of the Nano-scaled Polymeric Film System
Mizutani, Y.
344	KEYNOTE: Nano-structure Inspection by Dual-rotating Mueller Matrix Spectro-polarimeter
Mobasher, B.
4	Experimental Study of Shear Behavior of Kevlar 49 Fabric
2	Optimization of Multi-Layer Fabric Model for Engine Fragment Mitigation
Mohammad, N.
471	KEYNOTE: Optimal Length Scales Emerging from Shear Load Transfer in Natural Materials and Application to Carbon-based Nanocomposite Design
Mondal, A.B.
358	Dynamic Tri-axial Compression Experiments on Cor-Tuf
Montanez, J.
386	Fracture Between Short Molecules
Moon, R.
325	Mechanics of the Hierarchical Structure of Cellulose Nanocrystals
Mooney, C.
252	Detection of Damage of Epoxy Composites Using Carbon Nanotube Network
Moore, T.Z.
363	A New Technique for Monitoring Inhomogeneous Deformation During Flyer Plate Impact
Morales-Leon, A.
546	Experiment to Measure Ecosystem Surrounding and its Effect on Measure of Environmental Impact
Morgan, B.A.
56	Atmospheric Plasma Treatment of Fiber-reinforced Composites for Adhesive Bonding
Morgeneyer, T.F.
251	Feasibility Study of 3D Digital Volume Correlation of Synchrotron Radiation Laminography Data for Displacement Field Measurement During Ductile Crack initiation
Morikiyo, T.
186	Effect of Crushing Method of Wasted Tire on Mechanical Behavior on PLA Composites
Mota, A.
351	Void Growth and Coalescence in Aluminum Alloy
Motoyama, K.
411	Using Experimental Data to Improve Crash Modeling for Composite Materials
Moulton, J.
382	High Rate Characterization of Polymeric Closed-Cell Foams: Challenges Related to Size Effects
Moutou Pitti, R.
140	Stress intensity factors for viscoelastic axisymmetric problems applied to wood
144	Simplified Calculation Method of the Torsion Effect on the Seismic Behavior of Timber Buildings
141	Experimental Analysis of the Semi-rigidity Joint in the Standardized Timber Beam
86	Determination of stresses in drying wood by means of a viscoelastic relaxation model
16	Experimental results of green wood slice under natural drying
Moy, P
416	Initiation Fracture Toughness of Human Cortical Bone as a Function of Loading Rate
Moy, P.
366	Mechanical Response of Polycarbonate Nano-Composites as a Function of Strain Rate and Weight Percent of Nano-Silicate Clay Loading
370	Fracture Response of Cross-linked Epoxy Resins as a Function of Loading Rate
258	Effect of Strain Rate and Pre-Twist on Strength of Single KevlarŪ KM2 Fiber
355	Mode I Fracture Response of Polymer Based Gelatins as a Function of Loading Rate
Mrozek, R.
355	Mode I Fracture Response of Polymer Based Gelatins as a Function of Loading Rate
Mrozek, R.A.
468	Challenges for Implementing Polymer Gels in Defense Applications
Murasawa, G.
231	Intermittent Twin Region Nucleation Measurement Using Acoustic Emission
Murphy, M.J.
359	Ultra-high-speed Imaging for Explosive-driven Shocks in Transparent Media
Murthy, H.
226	Study of Damage Evolution During Fatigue of Composites Using DIC
297	Evaluation of Mechanical Properties of Nano-Structured Al6061 Synthesized Using Machining
281	Design of Ultrasonic Probe Configuration Using Finite-difference Time Domain Simulation
Murthy, T.G.
276	Visualization of Material Flow in Machining and Sliding Indentation Processes
Na, S.
387	Molecular Adhesion
Na, S.R
386	Fracture Between Short Molecules
Nakada, M.
74	Long Term Life Prediction of CFRP Laminates Under Wet Condition
Nakamura, T.
512	Interfacial Fracture Toughness and Residual Stress of Thermally Sprayed Coatings
70	Composite Damage Detection With Self-Sensing Fibers and Thermal Sprayed Electrodes
Nanbara, K.
90	Dynamic Thermal Deformation Measurement Technique for Large-scale High Temperature Piping
Nansteel, M.
201	Experimental Characterization and Modeling of the 2024-T3 Aluminum Alloy Under Close-in Blast Loading
Nansteel, M.W.
78	Failure Characterization of AA 2024 T3 Panel Subjected to Close-In Blast
298	Impulse Plug Measurements of Blast Reflected Impulse at Close Range
Nantasetphong, W.
245	Polyurea-based Composites: Ultrasonic Testing and Dynamic Mechanical Properties Modeling
Naraghi, M.
476	Nanomechanics of cross-linking molecules identified through in-situ SEM peeling
Nassar, S.A.
354	KEYNOTE: Fastening and Joining of Composite Materials
475	A Model for Fracture Characterization of Adhesively-Bonded Joints
474	Cylindrical Bending of Bonded Layered Thick Composites
Neggers, J.
398	Global Digital Image Correlation for Pressure Deflected Membranes
399	Fibrillation Delamination Micro-mechanics in Polymer-metal Interfaces
Neggers, N.
405	Enriched Digital Image Correlation to Characterize Geometrically Non-ideal Microbeams
Nelson, D.V.
152	Review of Methods for Determining Residual Stresses in Biological Materials
Nelson, K.A.
333	Laser Generation and Double-exposure Imaging of Hypervelocity Micro-projectiles
Nemat-Nasser, S.
230	Hybrid Polymer Grafted Nanoparticle Composites for Blast-induced Shock-wave Mitigation
228	Milled Glass Reinforced Polyurea Composites: the Effect of Surface Treatment
335	Shock Wave Interaction With Periodic Obstacles
245	Polyurea-based Composites: Ultrasonic Testing and Dynamic Mechanical Properties Modeling
Nemoto, M.
346	High Performance Impact-tolerant and Abrasion-resistant Materials: Lessons From Nature
Nguyen, S.T.
476	Nanomechanics of cross-linking molecules identified through in-situ SEM peeling
Nguyen, T.D.
406	Full-field Inflation Experiments of Soft Fibrous Tissues
165	Exploiting the Glass Transition for Shape Memory Programming in Polymers
Nguyen, T.L.
130	Experimental, Numerical and Analytical Evaluation of Structural Integrity of Experiment Container Subjected to Reduced Gravity Flight Testing
Ngwangwa, H.M.
504	Crack Growth Prediction Using the LEFM-based Cracked Beam Element
Niania, M.
156	What Makes Silly Putty Bounce?
Niccolini, G.
138	Time Correlation Between Acoustic, Electromagnetic and Neutron Emissions in Rocks Under Compression
199	Damage Assessment in Syracuse Limestone Specimens by Frequency Analysis of Elastic Emissions
Nie, X.
168	Inertia Effects in High-rate Compression Experiments of Soft Materials
292	Kolsky Tension Bar for Samples with Very Low Strength
Ning, J.F.
87	Development of a Quantitative Mechanical Test of Atherosclerotic Plaque Stability
Niordson, C.F.
421	Experimental Investigation of Plastic Strain Recovery in Thin Film Nanocrystalline Metals
Nishida, E.E.
326	A Priori Pulse Shaper Design for Constant-strain-rate Tests of Elastic-brittle Materials.
Nishida, M.
139	Improvement of Dynamic Properties of PLLA/PBAT Polymer Alloys Using Dialkyl Peroxide
Noels, L.
54	Stiction Failure in Microswitches due to Elasto-plastic Adhesive Contact
53	Non-local Damage-enhanced MFH for Multiscale Simulations of Composites
Nokes, J.P
56	Atmospheric Plasma Treatment of Fiber-reinforced Composites for Adhesive Bonding
Notbohm, J.
29	Quantification of Cellular Tractions in a Fibrin Matrix Using 3D TFM
Novitskaya, E.
314	Correlation of Multi-scale Modeling and Experimental Results for the Elastic Moduli of Cortical and Trabecular Bone
Novitskaya, E.E.
315	Isolation of Collagen From Cortical Bovine Bone for Preparation of Porous Collagen Sponges
Nyström, B.
34	Characterization and Analysis of Time Dependent Behavior of Bio-based Composites Made out of Highly Non-Linear Constituents
Obstalecki, M.
286	Utilizing Knots to Reduce Dynamic Loads in Fire Service Rope Systems
O'Daniel, J.
116	Discrete Modeling of Projectile Penetration Into Ultra High Performance Concrete
Ogawa, M.
70	Composite Damage Detection With Self-Sensing Fibers and Thermal Sprayed Electrodes
Ohlson, N.G.
101	Classical Optical Interferometry for Strain Measurements
Okajima, Y.
512	Interfacial Fracture Toughness and Residual Stress of Thermally Sprayed Coatings
Oliver, S.
443	Photogrammetry Measurements During a Tanking Test on the Space Shuttle External Tank, ET-137
Olson, M.D.
453	Simulation of Triaxial Residual Stress Mapping for a Hollow Cylinder
On, T.
250	An Experimental Study on the Wave Propagation Behavior in a 2-D Granular Medium
248	Dynamic Elasto-plastic Contact Behavior of Dimer Granular Pairs
Orikasa, S.
231	Intermittent Twin Region Nucleation Measurement Using Acoustic Emission
Orock, A.
410	Mechanical Characterization of Polyethylene Dlycol Diacrylate (PEGDA) for Tissue Engineering Applications
Osovski, S.
472	Is Adiabatic Shear Failure Really Adiabatic?
Otani, Y.
344	KEYNOTE: Nano-structure Inspection by Dual-rotating Mueller Matrix Spectro-polarimeter
Othman, S.F.
449	Brain Mechanical Imaging (BMI)
Otim, K.J.
468	Challenges for Implementing Polymer Gels in Defense Applications
Ott, K.A.
296	Determination of Simple Shear Material Properties of the Brain at High Strain Rates
Ouellet, S
382	High Rate Characterization of Polymeric Closed-Cell Foams: Challenges Related to Size Effects
Oura, Y.
550	Fringe Pitch Adjustment Method for Shape Measurement Using LSSM
Ouyang, J.
378	Piezoresistive Response of Z-shaped MEMS Thermal Actuators
Ouyang, M.
25	Long-range Mechanical Force Enables Self-assembly of Epithelial Tubules
Ozcan, A.
341	KEYNOTE: Lensfree Microscopy and Tomography on a Chip
Oztop, M.S.
417	Spatial Distribution of net Burgers Density Vector in a Deformed Single Crystal
Pagano, M.
290	Direct Measurements of the Cohesive Behavior of Soft Biological Interfaces
Pai, R.K.
465	Effect of Crystallite Orientation on Nanomechanical Properties of a Nanostructured poly(KAMPS)/aragonite Composite
Palokangas, M.
340	Development and Control of Residual Stresses in Buried Cavities for MEMS Applications
Pant, B.
210	A Versatile Microelectromechanical System for Fatigue Testing of Nanostructures
Pantuso, F.
501	Opto-mechanical Characterization of a MEMS Sensor for Real-time Infrared Imaging
Pappalardo, C.M.
530	Experimental Identification and Control of a Three-story Building Model
Pappalettera, G.
463	Hybrid Characterization of Laminated Wood With ESPI and Optimization Methods
274	Application of Contouring to Dental Reconstruction
461	Effects of Strain's Error on Residual Stresses Calculated by HDM
Pappalettere, C.
123	KEYNOTE: Recent Developments in the Contouring of Surfaces
463	Hybrid Characterization of Laminated Wood With ESPI and Optimization Methods
461	Effects of Strain's Error on Residual Stresses Calculated by HDM
460	Calibration of Barkhausen Noise for Residual Stress Measurement
274	Application of Contouring to Dental Reconstruction
Park, C.
430	Radial Mechanical Properties of Boron Nitride Nanotubes
431	Engineering Radial Deformations in Single-walled Carbon and Boron-nitride Nanotubes
Park, H.
358	Dynamic Tri-axial Compression Experiments on Cor-Tuf
242	Experimental Investigation on Dynamic Behavior of Ultra High Performance Composite Concrete With Kolsky Bar
243	Study on Penetration Equation by Experimental Investigation on Penetration into Wax
Park, I.K.
117	Quantitative Evaluation of the Nano-scaled Polymeric Film System
Park, T.S.
117	Quantitative Evaluation of the Nano-scaled Polymeric Film System
Patterson, E.
511	Comparison of FE and DIC Measurements of a Pi-joint Using Feature Vectors
Patterson, E.A
178	A Study on Damage-induced Behavior of Bonded PI-/T-joints Using Digital Image Correlation (DIC) and FE Modeling
Patterson, E.A.
234	The Effect of Riveting on the Fatigue Life of Fiber Metal Laminate Zero Load Transfer Joints
176	Impact Behavior of Composite PI/T-joints With Nano-graphene Adhesives
261	Photoelastic Testing and FE Analysis of T-Stub Model
Paulsen, K.D.
481	Tracking Cortical Surface Deformation Using Stereovision
Peixoto, T.
386	Fracture Between Short Molecules
Pelessone, D.
116	Discrete Modeling of Projectile Penetration Into Ultra High Performance Concrete
Pereira, J.M.
254	Dynamic Load Measurement of Ballistic Gelatin Impact Using an Instrumented Tube
Perez Rosa, M.A.
300	Use of Fiber Bragg Grating Strain Gages on a Pipeline Specimen Repaired With a CFRE Composite System
Perez-Bergquist, S.J.
218	Aluminum and Magnesium Alloy Penetration Damage
Perez-Rosado, A.
374	Mechanics of Multifunctional Skin Structures
Periasamy, C.
202	A Digital Gradient Sensing (DGS) Method for Evaluating Stress Gradients in Transparent Armor Materials at Elevated Rates of Loading
Perkins, T.T.
114	A Precision Force Microscope for Biophysics
Perrut, V.A.
300	Use of Fiber Bragg Grating Strain Gages on a Pipeline Specimen Repaired With a CFRE Composite System
Petel, O.E.
382	High Rate Characterization of Polymeric Closed-Cell Foams: Challenges Related to Size Effects
Peters, F.J.
383	Micromechanical Characterization of Ductile Damage in DP Steel
Peterson, W.
479	Tree Biomechanics Measurements Using 3D Photogrammetry
Phadke, A.
315	Isolation of Collagen From Cortical Bovine Bone for Preparation of Porous Collagen Sponges
Pierron, F.
349	Identification of the Anisotropic Plastic Behaviour of Sheet Metals at Large Strains
209	The Effects of Noise and Spatial Sampling on Identification of Material Parameters by Magnetic Resonance Elastography
356	Development of a Test Simulator to Perform Optimized Experiment Design
95	Identification of the Heterogeneous Elasto-plastic Behaviour of FSW Welds at High Strain Rate
105	Assessment of Corneal Deformation Using Optical Coherence Tomography and Digital Volume Correlation
Pierron, O.N.
210	A Versatile Microelectromechanical System for Fatigue Testing of Nanostructures
249	Very High Cycle Fatigue Behavior Of Electroplated Ni Films
Pinter, G.
184	A Pressure-dependent Nonlinear Viscoelastic Schapery Model for POM
Pivonka, R.
252	Detection of Damage of Epoxy Composites Using Carbon Nanotube Network
Pommier, R.
79	New Composite Timbers, Full Field Analysis of Adhesive Behavior
Pop, O.
397	Experimental Characterization of Integral Invariants in Wood Specimen Using the full Field Optical Technique
Porter, D.A.
367	Mechanical Behavior of Bi-stable Buckled MEMS for Actuation and Energy Harvesting
Porter, M.M.
312	Porous Hydroxyapatite-polyhydroxybutyrate Composites Fabricated by a Novel Method via Centrifugation
Poulsen, H.F.
137	Techniques for 3D Non-destructive Grain Orientation Mapping of Polycrystals
Prasad, S.V.
187	Mechanical Behavior of SS 304LN at High Strain Rates in Compression
Pratt, J.R.
477	KEYNOTE: Measurement of the Gold-Gold Bond Rupture Force at 4 K in a Single-atom Chain Using Photon-momentum-based Force Calibration
Preetish, K.L.M.
532	A 3D Thermodynamic Model for Shape Memory Alloys
Prime, M.B.
65	Cyclic Plasticity Under Shock Loading in an HCP Metal
64	Anisotropic and Pressure-dependent Plasticity Modeling for Residual Stress Prediction
Prorok, B.C.
413	New Insight into the Toughening Mechanisms of Nacre
412	New Insight into Pile-Up in Thin Film Indentation
Pupurs, A
128	Nonlinear Behavior of Natural Fiber/bio-based Matrix Composites
Qi, H.J.
420	Mechanics and Applications of Light-Activated Polymers
419	Time Dependent Recovery of Shape Memory Polymer Composites with Magnetic Particles
Qin, J.G.
223	Effect of Loading Rate on Tensile Properties of Three Steels
155	Experimental Study on Dynamic Mechanical Properties of a Mock PBX
Qin, Q.
376	Mechanical Properties of Five-fold Twinned Silver Nanowires
539	Size Effects on Mechanical Properties of Five-fold Twinned Silver Nanowires
Quinn, S.
345	Finite Element Modelling of Pulse Phase Thermography for Defect Detection
Rabiei, R.
239	Interfacial Fracture Toughness of Nacre
Rae, P.
112	Moderate Velocity Ball Impact of a Mock High-explosive
Ragupathy, K.
224	Prediction of Constraint Parameters Along the 3D Crack Front Under Negative Biaxial Loadings
Rahman, A.
269	Processing and Characterization of Graphene Reinforced Silicon Carbide Nanocomposites
Rajagopal, K.R.
402	A Gibbs Potential Based Implicit Approach for Modeling Viscoelastic Solids
513	KEYNOTE: A Thermodynamical Framework for Chemically Reacting Systems
368	Solution Approach for Coupled Diffusion-reaction-deformation Problems in Anisotropic Materials
Rajan, S.D.
2	Optimization of Multi-Layer Fabric Model for Engine Fragment Mitigation
4	Experimental Study of Shear Behavior of Kevlar 49 Fabric
Rajaraman, S.
194	Indentation and Dynamic Compression Experiments on Microcrystalline and Nanocrystalline Nickel
Ramesh, K.
224	Prediction of Constraint Parameters Along the 3D Crack Front Under Negative Biaxial Loadings
Ramesh, K.T.
302	Microstructure Evolution of UFG Al-1100 During High Temperature Kolsky Bar Experiments
305	3D Mechanism-based Modeling of the Dynamic Failure of Brittle Materials
306	Early Stage Damage Propagation in Hypervelocity Impacts on Brittle Materials
67	Effect of Particle Size Distribution on the Response of Metal-matrix Composites
279	Damage & the Electromechanical Behavior of Piezoelectric Ceramics
328	Deformation Twinning in Pure Magnesium at High Strain Rates
309	Failure Mechanisms in Aluminum Nitride Under Confined Dynamic Loading
238	Experiments and Modeling of Microcompression of Single-crystal Magnesium
Rand, R.H.
215	Frequency Multiplication and Demultiplication in MEMS
Randall, N.
499	The Surface Tribological and Mechanical Behaviors of Silicone-based Hydrogel Materials
500	Advanced Nanoindentation of Biomaterials
Rao, B.C.
297	Evaluation of Mechanical Properties of Nano-Structured Al6061 Synthesized Using Machining
Rasool, H.I.
58	High Resolution Atomic Force Microscopy With a Fiber Interferometer
Rauls, M.B.
392	Shock Waves in a Model Particulate Composite
Ravichandran, G.
262	Experimental Investigation of Failure in Viscoelastic Elastomers Under Combined Shear and Pressure
185	Cohesive Zone Law Extraction From an Experimental Peel Test
29	Quantification of Cellular Tractions in a Fibrin Matrix Using 3D TFM
343	Experimental Methods for Validation of Multiscale Plasticity Models
27	Measurement of Strength at High Pressures Using Oblique Shock Waves
392	Shock Waves in a Model Particulate Composite
Ray, C.W.
331	Correlation of Structural Strain to Tip Vorticity and Lift for a MAV Pliant Membrane Wing
Rayas, J.A.
73	Digital Holographic Microscopy by Mirau Interferometric Objective
Read, D.T.
15	MEMS Device for Fatigue Testing 25 Micrometer Thick Aluminum Specimens
Reed, J.
452	DNA Molecular Recognition Using AFM Nanometrology
Reinhart, W.D.
55	Pressure-Shear Loading of Granular Materials
Rethore, J.
84	Artifact Correction for DVC Measurements Using A Laboratory X-ray Source
100	3D Analysis of a Fatigue Crack in Cast Iron Using Digital Volume Correlation of X-ray Tomographic Images
Retsch, M.
333	Laser Generation and Double-exposure Imaging of Hypervelocity Micro-projectiles
Reu, P.L.
266	Uncertainty Quantification for 3D Digital Image Correlation
Revilock, D.
443	Photogrammetry Measurements During a Tanking Test on the Space Shuttle External Tank, ET-137
479	Tree Biomechanics Measurements Using 3D Photogrammetry
Reynolds, A.P.
95	Identification of the Heterogeneous Elasto-plastic Behaviour of FSW Welds at High Strain Rate
Rhorer, R.L.
237	Tensile Behavior of Single PPTA Fibers Measured by the Kolsky bar Using the Direct Fiber Clamping Methodđ
Ri, S.
90	Dynamic Thermal Deformation Measurement Technique for Large-scale High Temperature Piping
Ribeiro, A.S.A.
300	Use of Fiber Bragg Grating Strain Gages on a Pipeline Specimen Repaired With a CFRE Composite System
Rice, K.D.
237	Tensile Behavior of Single PPTA Fibers Measured by the Kolsky bar Using the Direct Fiber Clamping Methodđ
Richards, A.W.
343	Experimental Methods for Validation of Multiscale Plasticity Models
Rickert, T.
153	Experimental Study of High Speed Ball End milling of Titanium Alloy (Ti-6Al-4V)
Rickert, T.J.
558	Examples of Residual Stress Measurement With Prism - Hole-drilling and ESPI
Rios-Soberanis, C.R.
186	Effect of Crushing Method of Wasted Tire on Mechanical Behavior on PLA Composites
Rittel, D.
472	Is Adiabatic Shear Failure Really Adiabatic?
Robert, M.H.
99	Production of Metal Matrix Composites Using Thixinfiltration Techniques
Roberts, D.W.
481	Tracking Cortical Surface Deformation Using Stereovision
Rodríguez-Vera, R.
73	Digital Holographic Microscopy by Mirau Interferometric Objective
Roenbeck, M.
476	Nanomechanics of cross-linking molecules identified through in-situ SEM peeling
Rohde, S.
109	A Novel Method to Attach Membranes Uniformly on MAV wings
Romero, V.J.
106	Temperature Dependent Ductile Material Failure Constitutive Modeling With Validation Experiments
Rosowski, J.J.
483	Mapping the Histology of the Human Tympanic Membrane by Spatial Domain Optical Coherence Tomography
489	Digital Holographic Otoscope for Measurements of the Human Tympanic Membrane In-vivo
491	3D Deformations and Shape Measurements of Tympanic Membranes by Multi-wavelength Lensless Digital Holography
Rossi, M.
349	Identification of the Anisotropic Plastic Behaviour of Sheet Metals at Large Strains
356	Development of a Test Simulator to Perform Optimized Experiment Design
369	Comparison of Contouring Techniques Applied to Sheet Metal Testing
Rousseau, I.
104	Role of Viscoelasticity in Predicting the Shape Memory Effect of Polymers
Roux, S.
398	Global Digital Image Correlation for Pressure Deflected Membranes
83	KEYNOTE: On the Resolution of Local and Global DIC Approaches
84	Artifact Correction for DVC Measurements Using A Laboratory X-ray Source
213	CAD-based Calibration of a 3D DIC System
Rowlands, R.E.
334	Thermoelastic Stress Analysis of Mechanical Fasteners
Roy, S.
206	An Immersed Finite Element Method Approach for Brain Biomechanics
Rozite, L.
34	Characterization and Analysis of Time Dependent Behavior of Bio-based Composites Made out of Highly Non-Linear Constituents
128	Nonlinear Behavior of Natural Fiber/bio-based Matrix Composites
Ruan, D.
181	Energy Absorption of Sandwich Tubes under Lateral Loading
Ruan, G.-W.
146	The Time Dependent Mechanical Properties of Bovine Enamel
Rue, J.
285	Fabrication and Analysis of Small Flapping Wings
Ruggeri, C.
443	Photogrammetry Measurements During a Tanking Test on the Space Shuttle External Tank, ET-137
479	Tree Biomechanics Measurements Using 3D Photogrammetry
Ruiz, P.D.
105	Assessment of Corneal Deformation Using Optical Coherence Tomography and Digital Volume Correlation
Rumbaugh, T.
564	Techniques and Principles Using the Shimadzu HPV-2 In-Situ Storage Camera and an Invisible Vision System With sub 100 Nano Second Exposures
Rutledge, C.S.
483	Mapping the Histology of the Human Tympanic Membrane by Spatial Domain Optical Coherence Tomography
Ryu, J.
420	Mechanics and Applications of Light-Activated Polymers
Saifouni, O.
86	Determination of stresses in drying wood by means of a viscoelastic relaxation model
Saini, G.
333	Laser Generation and Double-exposure Imaging of Hypervelocity Micro-projectiles
Saka, M.
90	Dynamic Thermal Deformation Measurement Technique for Large-scale High Temperature Piping
Sakai, T.
186	Effect of Crushing Method of Wasted Tire on Mechanical Behavior on PLA Composites
Sakamoto, K
195	Load History Dependency of Plastic Collapse Behavior of Cracked Piping
Sakanashi, Y.
457	Determination of Local Creep Properties in Weldments
Sakaue, K.
33	Instantaneous Phase-stepping Photoelasticity and Hybrid Stress Analysis for a Curving Crack Under Thermal Load
Salamone, S.
361	Impact Monitoring in Aerospace Panels via Piezoelectric Rosettes
Saldana, C.
276	Visualization of Material Flow in Machining and Sliding Indentation Processes
Saleh, M.E.
510	Quantifying Size Effects in Polysilicon Using an In-situ On-chip Test Platform
Saleh, O.A.
329	High Speed Magnetic Tweezers at 10,000 fps With Reflected Hg-lamp Illumination
311	Optimized Calibration for Single-molecule Instruments
Sallier, L.
495	Influence of the Confined Behaviour and the Tensile Strength of Concrete Slabs Under Projectile-impact
496	A Testing Technique to Characterise the Shear Behaviour of Concrete at High Strain-rates
Salzar, R.S.
26	Injury Potential of Shock Induced Compressive Waves on Human Bone
Samad, W.A.
334	Thermoelastic Stress Analysis of Mechanical Fasteners
Sampath, S.
512	Interfacial Fracture Toughness and Residual Stress of Thermally Sprayed Coatings
Sanbhor, T.
494	Shape and Deformation Measurements by High-resolution Fringe Projection Methods
Sanborn, B
416	Initiation Fracture Toughness of Human Cortical Bone as a Function of Loading Rate
Sanborn, B.
168	Inertia Effects in High-rate Compression Experiments of Soft Materials
Sanborn, B.D.
258	Effect of Strain Rate and Pre-Twist on Strength of Single KevlarŪ KM2 Fiber
Sano, T.
78	Failure Characterization of AA 2024 T3 Panel Subjected to Close-In Blast
Saprunov, I.
379	Generalization of CFS Methodology
Sarac, A.
417	Spatial Distribution of net Burgers Density Vector in a Deformed Single Crystal
Sarntinoranont, M.
41	Pressure-deformation-injury Maps for Brain Tissue Subjected to High Rate Loading
Sasaki, T.
174	Evaluation of Dynamic Deformation Behavior of Aluminum Alloy by Electronic Speckle Pattern Interferometry
175	Effect of Loading History of Aluminum on Fringe Pattern in Electronic Speckle Pattern Interferometry
Sasso, M.
369	Comparison of Contouring Techniques Applied to Sheet Metal Testing
Saunders, M.M
277	Developing a Microloading Platform for Applications in Mechanotransduction Research
Schajer, G.S.
131	Simultaneous Measurement of Plate Natural Frequencies and Vibration Mode Shapes Using ESPI
132	Hole-drilling Residual Stress Measurement With Artifact Correction Using Full-field DIC
129	Hole-drilling Residual Stress Measurement in an Intermediate Thickness Specimen
466	ESPI Photoelastic Measurement of All In-Plane Stress Components
Scheidler, M.J.
275	Considerations for Numerical Modeling of Dynamic Behavior of Soft Materials
Scherzinger, W.M.
106	Temperature Dependent Ductile Material Failure Constitutive Modeling With Validation Experiments
Schiavi, A.
199	Damage Assessment in Syracuse Limestone Specimens by Frequency Analysis of Elastic Emissions
Schirer, J.P.
563	Recent Developments in a Novel Dynamic Testing Technique for Advanced Nanoscale Mechanical Property Measurements
Schmidt, S.
137	Techniques for 3D Non-destructive Grain Orientation Mapping of Polycrystals
Schmidt, T.
479	Tree Biomechanics Measurements Using 3D Photogrammetry
443	Photogrammetry Measurements During a Tanking Test on the Space Shuttle External Tank, ET-137
Schmidt, T.E.
459	Digital Image Correlation Measurements of a Nuclear Reactor Containment Dome During a Structural Integrity Test
229	Uncertainty Assessment in DIC: A Practical Approach
Schmitz, T.
285	Fabrication and Analysis of Small Flapping Wings
Schoch, A.
467	Rate Dependent Response of Crosslinked Epoxy Networks
Schoepfer, J.
3	Nano-Macro Correlation of Nano-Silica Concrete
Schwieker, K.
412	New Insight into Pile-Up in Thin Film Indentation
Sciammarella, C.A.
244	Optical Head as a Gauge Device in Manufacturing
246	KEYNOTE: Optical Fourier Transforms in the Nano Range
123	KEYNOTE: Recent Developments in the Contouring of Surfaces
Sciammarella, F.M.
244	Optical Head as a Gauge Device in Manufacturing
246	KEYNOTE: Optical Fourier Transforms in the Nano Range
Sebastian, C.
511	Comparison of FE and DIC Measurements of a Pi-joint Using Feature Vectors
Sehitoglu, H.
227	Relating Strain Fields and Microstructural Factors in Fatigue Crack Growth
Seidt, J.D.
254	Dynamic Load Measurement of Ballistic Gelatin Impact Using an Instrumented Tube
211	Plastic Deformation of Ti-6Al-4V Plate over a Wide Range of Loading Conditions
Seitz, O.
386	Fracture Between Short Molecules
Sethu, P
277	Developing a Microloading Platform for Applications in Mechanotransduction Research
Seyed Yaghoubi, A.
22	Thickness Effect on Cross-ply GLARE 5 FML Beams Subjected to Ballistic Impact
21	Damage Assessments of Ballistic Impact Behaviors of GLARE 5 (3/2) Beams with Various Stacking Sequences
20	Ballistic Impact Behaviors of GLARE 5 Fiber-Metal Laminated Plates
Shafieian, M.
26	Injury Potential of Shock Induced Compressive Waves on Human Bone
Shah, K.S.
277	Developing a Microloading Platform for Applications in Mechanotransduction Research
Sharma, R.
281	Design of Ultrasonic Probe Configuration Using Finite-difference Time Domain Simulation
Shaw, G. A.
401	Hydrodynamic Force Compensation for Single-molecule Mechanical Testing Using Colloidal Probe Atomic Force Microscopy
Shaw, G.A.
403	Frequency Modulated Force Metrology
Shen, J.
181	Energy Absorption of Sandwich Tubes under Lateral Loading
Shim, V.P.W.
31	Quasi-static Compressive and Tensile Test on Cancellous Bone in Human Cervical Spine
30	A Miniature Impact Tester for Dynamic Testing of Small Specimens
Shimo, K.
454	Dynamic Shape and Strain Measurements of Rotating Tire in Time-series
Shiozaki, H.
411	Using Experimental Data to Improve Crash Modeling for Composite Materials
Shiraishi, T.
195	Load History Dependency of Plastic Collapse Behavior of Cracked Piping
Shrot, A.
62	Dynamic Behavior and Numerical Modeling of Titanium 15-3-3-3 Alloy
Shukla, A.
252	Detection of Damage of Epoxy Composites Using Carbon Nanotube Network
198	Response of Curved Carbon Composite Panels to Shock Loading
271	Fluid Structure Interaction During Shock Loading in a Compressible Fluid
Shull, K.R.
468	Challenges for Implementing Polymer Gels in Defense Applications
Siebert, Th.
107	An Approach to Strain Measurement Uncertainty for DIC Using the SPOTS Calibration Procedure
Silberstein, M.N.
317	Multiscale Modeling of Mechanoresponsive Polymers
Silva, M.
80	Topology Optimization in Two-dimensional Highly Nonlinear Granular Crystals With Spherical Intruders
Simcak, F.
349	Identification of the Anisotropic Plastic Behaviour of Sheet Metals at Large Strains
Simsiriwong, J.
265	Viscoelastic Creep Compliance Using Prony Series and Spectrum Function Approach
Singer, J.P.
333	Laser Generation and Double-exposure Imaging of Hypervelocity Micro-projectiles
Singh, A.
269	Processing and Characterization of Graphene Reinforced Silicon Carbide Nanocomposites
Singh, R.P.
269	Processing and Characterization of Graphene Reinforced Silicon Carbide Nanocomposites
Singh, RP
270	Reinforcement Of Epoxy Resins With POSS For Enhancing Fracture Toughness At Cryogenic Temperature
Sisneros, T.A.
268	A Comparison of Residual Stress Measurements on Linear Friction Welds Using the Contour Method and Neutron Diffraction
Sloan, S.D.
255	Dynamic Contact Mechanics of Geologic Materials: Experiments, Modeling and Applications
Smela, E.
374	Mechanics of Multifunctional Skin Structures
Smith, D.J.
37	Simulation of Interference Fitted Joint Strength as Used in Hot Rolling Work Rolls
Smith, D.T.
477	KEYNOTE: Measurement of the Gold-Gold Bond Rupture Force at 4 K in a Single-atom Chain Using Photon-momentum-based Force Calibration
Smith, J.
116	Discrete Modeling of Projectile Penetration Into Ultra High Performance Concrete
Smith, M.W.
430	Radial Mechanical Properties of Boron Nitride Nanotubes
Soderholm, K.
222	Utilizing Digital Image Correlation to Capture Strains in Dental Applications
Sol, H.
191	Multi-axial Quasi-static Strength of a Clinched Sheet Metal Assembly
Song, B.
57	Preloaded High-rate Tension Techniques
264	Dynamic Fracture Toughness Test Using Hopkinson Bar
217	Thermal Infrared Imaging to Study Microstructural Damage and Failure in Aluminum Alloys
Song, Y.S.
335	Shock Wave Interaction With Periodic Obstacles
Sottos, N.R.
317	Multiscale Modeling of Mechanoresponsive Polymers
318	In Situ Strain Measurement in Anodes in Lithium-ion Batteries
240	Simultaneous Observation of Phase-Stepped Photoelastic Images Using Diffraction Gratings
337	Molecular Tailoring of Interfacial Adhesion Using Self-assembled Monolayers
Spangenberger, A.
524	Dynamic Evaluation of Forces During Mastication
Spowart, J.E.
19	Comparison of Mechanical Properties of Polymer-based Multi-phase Particulate Composites
Springmann, J.
322	Experiments on Hydrogels of Varying Shape
Sridharan, K.
283	Characterizing the Wear of Diamond-like-carbon Atomic Force Microscope Probes
Srinivasa, A.R.
402	A Gibbs Potential Based Implicit Approach for Modeling Viscoelastic Solids
Srivastava, A.
335	Shock Wave Interaction With Periodic Obstacles
Stafford, R.J.
52	Use of Vision-based Methods for Measurement of Mechanical Properties of Exhaust Catalysts
Stamborska, M.
349	Identification of the Anisotropic Plastic Behaviour of Sheet Metals at Large Strains
Stargel, D.S.
198	Response of Curved Carbon Composite Panels to Shock Loading
Starman, L.A.
488	Etching Silicon Dioxide for CNT Field Emission Device
487	Silicon Carbide High Temperature MEMS Capacitive Strain Sensor
484	Surface Micromachined Contact Support Structure for Microswitch Lifecycle Testing
Staroselsky, A.
381	The Application of the Combined Creep and Rate-independent Plasticity Model to Turbine Components Life Prediction
Steckel, G.L.
56	Atmospheric Plasma Treatment of Fiber-reinforced Composites for Adhesive Bonding
Steinzig, M.
462	Residual Stress Generated by a Wire Electronic Dishcharge Machine cut
Stolyar, V.
27	Measurement of Strength at High Pressures Using Oblique Shock Waves
Stumpf, W.E.
76	Plasticity and Ballistic Characterization of a new Armour Steel
Stynoski, P.B.
414	Processing, Microstructure, and Properties of Carbon Nanotube Reinforced Silicon Carbide
Styrcula, M.
244	Optical Head as a Gauge Device in Manufacturing
Su, F.I.
119	Thickness Effects on the Thermal Expansion Coefficient of ITO/PET Film
Su, T.H.
119	Thickness Effects on the Thermal Expansion Coefficient of ITO/PET Film
Subhash, G.
41	Pressure-deformation-injury Maps for Brain Tissue Subjected to High Rate Loading
39	Role of Pressure and Strain Rate on Structural Amorphization in Boron Carbide
40	A Fresh look at why Does Spinel Outperforms Sapphire During Ballistic Tests?
Subramanian, S.J.
226	Study of Damage Evolution During Fatigue of Composites Using DIC
Sullivan, M.
413	New Insight into the Toughening Mechanisms of Nacre
Sullivan, R.W.
265	Viscoelastic Creep Compliance Using Prony Series and Spectrum Function Approach
Sumanth, D.
533	A Theoretical Model for a SMA Fiber Embedded Composite Beam
Sun, S.
61	Characterization of the Mechanical Behavior of Sunflower Stem for Bio-composite Applications
Sunaga, K.
133	Optical Interferometric Study on Loading Hysteresis
Sundaram, N.K.
276	Visualization of Material Flow in Machining and Sliding Indentation Processes
Sundstrom, A.
452	DNA Molecular Recognition Using AFM Nanometrology
Sung, P.C.
203	Measurement of Low Level Stress by Integrating Photoelasticity and Spectrometry
Sutton, M.A.
95	Identification of the Heterogeneous Elasto-plastic Behaviour of FSW Welds at High Strain Rate
87	Development of a Quantitative Mechanical Test of Atherosclerotic Plaque Stability
Suzuki, H.
175	Effect of Loading History of Aluminum on Fringe Pattern in Electronic Speckle Pattern Interferometry
174	Evaluation of Dynamic Deformation Behavior of Aluminum Alloy by Electronic Speckle Pattern Interferometry
Suzuki, M.
195	Load History Dependency of Plastic Collapse Behavior of Cracked Piping
Suzuki, R.
195	Load History Dependency of Plastic Collapse Behavior of Cracked Piping
Suzuki, Y.
364	3D/4D Strain Mapping Using In-situ X-ray Microtomography
Svendsen, B.
97	Modeling of Sheet Metals With Coarse Texture via Crystal Plasticity
Szelengowicz, I.
80	Topology Optimization in Two-dimensional Highly Nonlinear Granular Crystals With Spherical Intruders
Szewciw, L.
273	Scalation Pattern Increases Penetration Resistance of Striped Bass Fish Skin
Taher, S.T.
444	Characterization of Compressive Properties of Polymer Foam Materials Using DIC and a Modified Arcan Fixture
Tajiri, D.
133	Optical Interferometric Study on Loading Hysteresis
Takahashi, R.
231	Intermittent Twin Region Nucleation Measurement Using Acoustic Emission
Takeuchi, A.
364	3D/4D Strain Mapping Using In-situ X-ray Microtomography
Tan, V.B.C.
30	A Miniature Impact Tester for Dynamic Testing of Small Specimens
Tanadchangsaeng, N.
312	Porous Hydroxyapatite-polyhydroxybutyrate Composites Fabricated by a Novel Method via Centrifugation
Tandon, G.P.
241	Relaxation and Recovery Behavior of an Epoxy Based Shape Memory Polymer Resin
Tarantini, S.
410	Mechanical Characterization of Polyethylene Dlycol Diacrylate (PEGDA) for Tissue Engineering Applications
Tasan, C.C.
383	Micromechanical Characterization of Ductile Damage in DP Steel
Tekalur, S.A.
301	Evaluating Bolted Joint Strength at High Strain Rates
272	Visualization of Micro-cracks in Compact Bovine Bone
Templeton, D.
474	Cylindrical Bending of Bonded Layered Thick Composites
Templeton, D.W.
497	KEYNOTE: The Challenge and Opportunities of Composite Joining
Thevamaran, R.
91	Dynamics of Multilayered Structures of VACNTs with Metallic Inter-layers
Thomas, E.L.
333	Laser Generation and Double-exposure Imaging of Hypervelocity Micro-projectiles
Thomsen, O.T.
444	Characterization of Compressive Properties of Polymer Foam Materials Using DIC and a Modified Arcan Fixture
Thoppul, S.D.
179	KEYNOTE: Experimental and Numerical Characterization of Relaxation in Bolted Composite Joints
Thornhill, T.F.
55	Pressure-Shear Loading of Granular Materials
Thyden, M.
483	Mapping the Histology of the Human Tympanic Membrane by Spatial Domain Optical Coherence Tomography
Ti, C.
494	Shape and Deformation Measurements by High-resolution Fringe Projection Methods
Tippur, H.
202	A Digital Gradient Sensing (DGS) Method for Evaluating Stress Gradients in Transparent Armor Materials at Elevated Rates of Loading
Tippur, H.V.
207	Is Nano Always Better? Static and Dynamic Fracture Study of Particulate Polymer Composites
205	Effect of Filler Particle Shape on Dynamic Fracture Behavior of Glass-filled Epoxy
Tirrell, D.A.
29	Quantification of Cellular Tractions in a Fibrin Matrix Using 3D TFM
Tittmann, B.R.
117	Quantitative Evaluation of the Nano-scaled Polymeric Film System
Toda, H.
364	3D/4D Strain Mapping Using In-situ X-ray Microtomography
Tofts, A.
561	High-Speed Vibration Measurements Using Digital Image Correlation
Toler, B.F.
485	Characterizing External Resistive, Inductive and Capacitive Loads for Micro-switches
Tong, C.J.
94	Design and Development of Internal Friction and Energy Loss Measurement on Nanocrystalline Aluminum Thin Films
Tong, W.
339	On the Compression Testing of Small Trabecular Bone Samples
338	Bias Reduction in Displacement Estimation by Linear Digital Image Correlation of Noisy Images
342	Dynamic Testing of Porous Materials Using a High-speed Digital Camera and Linear Image Correlation Analysis
Tortorelli, D.
80	Topology Optimization in Two-dimensional Highly Nonlinear Granular Crystals With Spherical Intruders
Toussaint, E.
60	Application of Full-field Measurements to Analyze the Thermo-mechanical Response of a Three-branch Rubber Specimen
59	Applying the Grid Method to Investigate the Mechanical Behavior of Asphalt
61	Characterization of the Mechanical Behavior of Sunflower Stem for Bio-composite Applications
Tran, V.
565	Advanced Applications of 3D Digital Image Correlation
Tripp, E.
501	Opto-mechanical Characterization of a MEMS Sensor for Real-time Infrared Imaging
Trujillo, C.P.
313	Effect of Temperature on Texture Evolution in Tantalum During Dynamic-extrusion
113	Incipient and Progressive Damage in Polyethylene Under Extreme Tensile Conditions
218	Aluminum and Magnesium Alloy Penetration Damage
212	Influence of Loading Kinetics on the Shock Response of Polycrystalline Copper
Tsai, L.
190	High Strain Rate Characteristics of Fiber Bragg Grating Strain sensors
Tscharnuter, D.
184	A Pressure-dependent Nonlinear Viscoelastic Schapery Model for POM
Tseng, Y.C.
203	Measurement of Low Level Stress by Integrating Photoelasticity and Spectrometry
Turner, K.T.
288	Improved Instrumented Indentation of Soft Materials through Surface Deformation Measurements
283	Characterizing the Wear of Diamond-like-carbon Atomic Force Microscope Probes
Tursi, F.
538	Algorithms for HDM Residual Stress Measurement: Numerical-Experimental Comparison
461	Effects of Strain's Error on Residual Stresses Calculated by HDM
460	Calibration of Barkhausen Noise for Residual Stress Measurement
Tyler, C.
285	Fabrication and Analysis of Small Flapping Wings
Tyson, J.
443	Photogrammetry Measurements During a Tanking Test on the Space Shuttle External Tank, ET-137
Uesugi, K.
364	3D/4D Strain Mapping Using In-situ X-ray Microtomography
Umar, M.
547	Structural Stability of a Microgravity Experiment Container
130	Experimental, Numerical and Analytical Evaluation of Structural Integrity of Experiment Container Subjected to Reduced Gravity Flight Testing
Urgessa, G.
85	Blast Overpressure Effects on Bio-mechanical Systems
van der Sluis, O.
399	Fibrillation Delamination Micro-mechanics in Polymer-metal Interfaces
Van Houtte, P.
191	Multi-axial Quasi-static Strength of a Clinched Sheet Metal Assembly
63	Uncertainty Assessment of DIC Under Heterogeneous Strain States
Van Paepegem, W.
38	Impact of Lens Distortions on Strain Measurements Obtained With Digital Image Correlation
Van Tonder, F.
504	Crack Growth Prediction Using the LEFM-based Cracked Beam Element
Vanderklok, A.
301	Evaluating Bolted Joint Strength at High Strain Rates
272	Visualization of Micro-cracks in Compact Bovine Bone
Varghese, S.
315	Isolation of Collagen From Cortical Bovine Bone for Preparation of Porous Collagen Sponges
Varna, J.
34	Characterization and Analysis of Time Dependent Behavior of Bio-based Composites Made out of Highly Non-Linear Constituents
193	Viscoelastic and Viscoplastic Behavior of GF/VE [ą45]s Laminates
Vaughan, M.
409	Evaluation of Composite Bone Cement for Orthopedic Applications
Vehoff, H.
97	Modeling of Sheet Metals With Coarse Texture via Crystal Plasticity
Veldman, R.L.
298	Impulse Plug Measurements of Blast Reflected Impulse at Close Range
Venkataraman, L.
289	Simultaneous Measurement of Force and Conductance Across Single Molecule Junctions
Venkert, A.
472	Is Adiabatic Shear Failure Really Adiabatic?
Veysset, D.
333	Laser Generation and Double-exposure Imaging of Hypervelocity Micro-projectiles
Vieira, R.D.
300	Use of Fiber Bragg Grating Strain Gages on a Pipeline Specimen Repaired With a CFRE Composite System
Villon, P.
259	Modified Constitutive Relation Error Strategy for Elastic Properties Identification
Viney, C.
157	KEYNOTE: Untangling a Sticky Problem: the Tensile Properties of Natural Silks
Vogler, T.J.
55	Pressure-Shear Loading of Granular Materials
Vossen, B.G.
399	Fibrillation Delamination Micro-mechanics in Polymer-metal Interfaces
Vu, T.K.
144	Simplified Calculation Method of the Torsion Effect on the Seismic Behavior of Timber Buildings
Wakayama, S.
186	Effect of Crushing Method of Wasted Tire on Mechanical Behavior on PLA Composites
Wald, M.J.
288	Improved Instrumented Indentation of Soft Materials through Surface Deformation Measurements
Walker, J.D.
363	A New Technique for Monitoring Inhomogeneous Deformation During Flyer Plate Impact
Walter, M.
208	Hardening Behaviour of Thin Wires Under Loading With Strain Gradients
Walter, T.
66	Nano-scale Investigation of Microstructural Phenomenon Contributing to Toughening of Nanoparticulate Reinforced Polymers
Walwadkar, S.
148	Application of Projection Moiré in Electronic Packaging and Assembly for Post-surface Mount Warpage Measurements
Wang, E.
250	An Experimental Study on the Wave Propagation Behavior in a 2-D Granular Medium
271	Fluid Structure Interaction During Shock Loading in a Compressible Fluid
248	Dynamic Elasto-plastic Contact Behavior of Dimer Granular Pairs
Wang, H.
431	Engineering Radial Deformations in Single-walled Carbon and Boron-nitride Nanotubes
Wang, J.
388	A Novel Micro-tensile Tester Using a Force-domain Analogy to Digital Converter
Wang, Jy-An
439	A new Approach to Determine the Quasi-static and Dynamic Fracture Toughness of Engineering Materials
Wang, L.
342	Dynamic Testing of Porous Materials Using a High-speed Digital Camera and Linear Image Correlation Analysis
338	Bias Reduction in Displacement Estimation by Linear Digital Image Correlation of Noisy Images
339	On the Compression Testing of Small Trabecular Bone Samples
545	A Technique for Unconfined Compression Testing of Soft Biomaterials
12	Effect of Stress Relief Process on Mechanical Performance of MP35N Cable as Lead Conductor in Medical Device
Wang, Q.
346	High Performance Impact-tolerant and Abrasion-resistant Materials: Lessons From Nature
Wang, S.
169	Molecular Dynamics Simulation on Plastic Deformation of Nanocrystalline Copper
Wang, S.H.
190	High Strain Rate Characteristics of Fiber Bragg Grating Strain sensors
Wang, W.C.
203	Measurement of Low Level Stress by Integrating Photoelasticity and Spectrometry
Wang, W.-C.
508	Experimental and Numerical Investigation of Thermal Deformation of Thermoelectric Coolers
Wang, Y.
87	Development of a Quantitative Mechanical Test of Atherosclerotic Plaque Stability
63	Uncertainty Assessment of DIC Under Heterogeneous Strain States
342	Dynamic Testing of Porous Materials Using a High-speed Digital Camera and Linear Image Correlation Analysis
Wang, Y.T.
94	Design and Development of Internal Friction and Energy Loss Measurement on Nanocrystalline Aluminum Thin Films
Wangard, W.
303	A Thermodynamic State Driven Nonlinear Viscoelastic Constitutive Model
Warren, T.L.
17	Perforation of Aluminum Plates with 7.62 APM2 Bullets
Watanabe, H.
139	Improvement of Dynamic Properties of PLLA/PBAT Polymer Alloys Using Dialkyl Peroxide
Watanabe, T.
175	Effect of Loading History of Aluminum on Fringe Pattern in Electronic Speckle Pattern Interferometry
Waugh, R.C.
345	Finite Element Modelling of Pulse Phase Thermography for Defect Detection
Waymel, R.
250	An Experimental Study on the Wave Propagation Behavior in a 2-D Granular Medium
Weck, A.
100	3D Analysis of a Fatigue Crack in Cast Iron Using Digital Volume Correlation of X-ray Tomographic Images
Weden, B.
346	High Performance Impact-tolerant and Abrasion-resistant Materials: Lessons From Nature
Weerasooriya, T
416	Initiation Fracture Toughness of Human Cortical Bone as a Function of Loading Rate
Weerasooriya, T.
415	Mechanical Response of Friction Stir Welded Aluminum 2139-T8 as a Function of Loading Rate and Stress-state
355	Mode I Fracture Response of Polymer Based Gelatins as a Function of Loading Rate
258	Effect of Strain Rate and Pre-Twist on Strength of Single KevlarŪ KM2 Fiber
366	Mechanical Response of Polycarbonate Nano-Composites as a Function of Strain Rate and Weight Percent of Nano-Silicate Clay Loading
168	Inertia Effects in High-rate Compression Experiments of Soft Materials
Weerasorriya, T.
370	Fracture Response of Cross-linked Epoxy Resins as a Function of Loading Rate
Wei, X.
471	KEYNOTE: Optimal Length Scales Emerging from Shear Load Transfer in Natural Materials and Application to Carbon-based Nanocomposite Design
Weisenberger, R.P.
487	Silicon Carbide High Temperature MEMS Capacitive Strain Sensor
Welch, C.R.
414	Processing, Microstructure, and Properties of Carbon Nanotube Reinforced Silicon Carbide
Wellman, G.W.
390	Detailed Measurements of Thread Deformation and Failure in Thin Walled Aluminum Alloy Joints
106	Temperature Dependent Ductile Material Failure Constitutive Modeling With Validation Experiments
Wen, X.J.
223	Effect of Loading Rate on Tensile Properties of Three Steels
Weng, J.F.
557	Robust Rotation-unwrapping Algorithm for Problems of Holes and Noise
Weng, J.-F.
517	Phase Unwrapping Using Novel Rotation Algorithm
Werner, B.T.
233	Characterization and Modeling of Polymeric Matrix Under Static and Dynamic Loading
Westbrook, K.K.
419	Time Dependent Recovery of Shape Memory Polymer Composites with Magnetic Particles
White, J.
410	Mechanical Characterization of Polyethylene Dlycol Diacrylate (PEGDA) for Tissue Engineering Applications
White, S.
361	Impact Monitoring in Aerospace Panels via Piezoelectric Rosettes
White, S.R.
317	Multiscale Modeling of Mechanoresponsive Polymers
240	Simultaneous Observation of Phase-Stepped Photoelastic Images Using Diffraction Gratings
318	In Situ Strain Measurement in Anodes in Lithium-ion Batteries
Whittie, S.D.
370	Fracture Response of Cross-linked Epoxy Resins as a Function of Loading Rate
Wickwire, A.C.
296	Determination of Simple Shear Material Properties of the Brain at High Strain Rates
Wijeratne, S.S.
103	KEYNOTE: Principles Involved in Interpreting Single-Molecule Force Measurement of Biomolecules
Wildman, R.A.
294	Peridynamic Simulations of Infinite Regions Using a Perfectly Matched Layer
Williams, C.
309	Failure Mechanisms in Aluminum Nitride Under Confined Dynamic Loading
Williams, G.
230	Hybrid Polymer Grafted Nanoparticle Composites for Blast-induced Shock-wave Mitigation
Williamson, K.J.
332	In Situ Dynamics of Electronics Assemblies Under Shock
Winarski, R.P.
267	Nanotomography of Polymer Nanocomposite Nanofibers
Winiarski, B.
132	Hole-drilling Residual Stress Measurement With Artifact Correction Using Full-field DIC
Withers, P.J.
132	Hole-drilling Residual Stress Measurement With Artifact Correction Using Full-field DIC
Wong, W.
453	Simulation of Triaxial Residual Stress Mapping for a Hollow Cylinder
Wood, L.
346	High Performance Impact-tolerant and Abrasion-resistant Materials: Lessons From Nature
Woodhead, J.
124	Modelling of Nosing for the Assembly of Aerospace Bearings
Wright, J.
271	Fluid Structure Interaction During Shock Loading in a Compressible Fluid
Wu, C.W.
96	Film Residual Stress Assessment Method via Temporarily Thermal Relaxation
Wu, D.
464	Combined Effects of Moisture and UV Radiation on the Mechanics of Carbon Fiber Reinforced Vinylester Composites
Wu, L.
54	Stiction Failure in Microswitches due to Elasto-plastic Adhesive Contact
53	Non-local Damage-enhanced MFH for Multiscale Simulations of Composites
Wu, T.-Y.
508	Experimental and Numerical Investigation of Thermal Deformation of Thermoelectric Coolers
Xia, S.
185	Cohesive Zone Law Extraction From an Experimental Peel Test
Xia, Z.
235	Application of a New Experimental Method to Determine Bi-material Interface Bonding Strength
Xiao, R.
165	Exploiting the Glass Transition for Shape Memory Programming in Polymers
Xu, F.
376	Mechanical Properties of Five-fold Twinned Silver Nanowires
Xu, F.X.
377	Buckling Induced Silicon Nanowire Coils on Elastomeric Substrates
Xu, H.
449	Brain Mechanical Imaging (BMI)
Xu, L.R.
44	Fish-tank Approach to Evaluate Dynamic Failure and Durability of Marine Composites
42	New Shear Fracture Test for Mode II Fracture Toughness Measurement
43	Failure due to Notch and Interface Interaction in Bi-material Joints
Xuan, Y.
338	Bias Reduction in Displacement Estimation by Linear Digital Image Correlation of Noisy Images
Yamazaki, T.
133	Optical Interferometric Study on Loading Hysteresis
Yanagihara, S.
195	Load History Dependency of Plastic Collapse Behavior of Cracked Piping
Yang, D.
293	An Identification Method for the Viscoelastic Characterization of Materials
Yang, H
172	Extracting Cell Gap, Twisted and Pretilt Angles of TNLC Cells by Effective Parameters using Stokes Polarimetry
Yang, H.T.
507	Interval Identification of Constitutive Parameters of Fractional Viscoelastic Models
Yang, S.Z.
252	Detection of Damage of Epoxy Composites Using Carbon Nanotube Network
Yang, T.T.
172	Extracting Cell Gap, Twisted and Pretilt Angles of TNLC Cells by Effective Parameters using Stokes Polarimetry
Yang, X.
474	Cylindrical Bending of Bonded Layered Thick Composites
475	A Model for Fracture Characterization of Adhesively-Bonded Joints
354	KEYNOTE: Fastening and Joining of Composite Materials
Yao, H.
339	On the Compression Testing of Small Trabecular Bone Samples
Yao, W.A
507	Interval Identification of Constitutive Parameters of Fractional Viscoelastic Models
Yasar, O.
410	Mechanical Characterization of Polyethylene Dlycol Diacrylate (PEGDA) for Tissue Engineering Applications
Yatnalkar, R.S.
211	Plastic Deformation of Ti-6Al-4V Plate over a Wide Range of Loading Conditions
Yeh, W.-F.
388	A Novel Micro-tensile Tester Using a Force-domain Analogy to Digital Converter
Yen, C.F.
78	Failure Characterization of AA 2024 T3 Panel Subjected to Close-In Blast
67	Effect of Particle Size Distribution on the Response of Metal-matrix Composites
201	Experimental Characterization and Modeling of the 2024-T3 Aluminum Alloy Under Close-in Blast Loading
Yilmaz, M.
418	Digital Image Correlation (DIC) to determine stress and strain of a nanowire loaded with a MEMS actuator in a Scanning Electron Microscope
Yim, S.
459	Digital Image Correlation Measurements of a Nuclear Reactor Containment Dome During a Structural Integrity Test
Yoneyama, S.
186	Effect of Crushing Method of Wasted Tire on Mechanical Behavior on PLA Composites
33	Instantaneous Phase-stepping Photoelasticity and Hybrid Stress Analysis for a Curving Crack Under Thermal Load
York, S.L.
277	Developing a Microloading Platform for Applications in Mechanotransduction Research
Yoshida, S.
133	Optical Interferometric Study on Loading Hysteresis
135	KEYNOTE: Scale Independent Approach to Deformation and Fracture
136	Opto-acoustic Technique to Evaluate Adhesion Strength of Nano-scale Systems
174	Evaluation of Dynamic Deformation Behavior of Aluminum Alloy by Electronic Speckle Pattern Interferometry
175	Effect of Loading History of Aluminum on Fringe Pattern in Electronic Speckle Pattern Interferometry
Yu, J.
312	Porous Hydroxyapatite-polyhydroxybutyrate Composites Fabricated by a Novel Method via Centrifugation
201	Experimental Characterization and Modeling of the 2024-T3 Aluminum Alloy Under Close-in Blast Loading
Yu, J-.Y.
25	Long-range Mechanical Force Enables Self-assembly of Epithelial Tubules
Yu, K.
419	Time Dependent Recovery of Shape Memory Polymer Composites with Magnetic Particles
Yu, M.
374	Mechanics of Multifunctional Skin Structures
Yuan, Y.S.
304	HP/HT Hot-wet Resistance of Thermoplastic PEEK and its Composites
Yue, K.
387	Molecular Adhesion
Zaimova, D.
163	Design of new Elastomeric Matrix Composites: Comparison of Mechanical Properties and Determining Viscoelastic Parameters via Continuous Micro Indentation
Zaldivar, R.J.
56	Atmospheric Plasma Treatment of Fiber-reinforced Composites for Adhesive Bonding
Zanoni, C.
102	Measurement of Metallic Adhesion Force-to-Elongation Profile Under High Separation-Rate Conditions
Zavattieri, P.
346	High Performance Impact-tolerant and Abrasion-resistant Materials: Lessons From Nature
Zavattieri, P.D.
325	Mechanics of the Hierarchical Structure of Cellulose Nanocrystals
323	Size Effects in Biomineralized and Biomimetic Materials
Zehnder, A.T.
215	Frequency Multiplication and Demultiplication in MEMS
216	High Confdencee Level Calibration for AFM Based Fracture Testing of Nanobeams
Zellner, M.B.
455	Measurements of Particle Velocity within a Kolsky Bar With Applications to Wave Separation
Zhang, G.
169	Molecular Dynamics Simulation on Plastic Deformation of Nanocrystalline Copper
Zhang, H.
12	Effect of Stress Relief Process on Mechanical Performance of MP35N Cable as Lead Conductor in Medical Device
Zhang, J.
238	Experiments and Modeling of Microcompression of Single-crystal Magnesium
Zhang, L.
501	Opto-mechanical Characterization of a MEMS Sensor for Real-time Infrared Imaging
Zhang, W.
301	Evaluating Bolted Joint Strength at High Strain Rates
272	Visualization of Micro-cracks in Compact Bovine Bone
Zhao, X.
507	Interval Identification of Constitutive Parameters of Fractional Viscoelastic Models
Zhao, Y.
170	Equation of State of Explosive Detonation Products
171	Interaction Between Oxygen and Carbon Dioxide at High Pressure and Temperature
Zheng, J.Q.
258	Effect of Strain Rate and Pre-Twist on Strength of Single KevlarŪ KM2 Fiber
Zheng, M.
430	Radial Mechanical Properties of Boron Nitride Nanotubes
431	Engineering Radial Deformations in Single-walled Carbon and Boron-nitride Nanotubes
432	Direct Measurement of the Interfacial Strength of PMMA-CNT Interface
Zhou, B.
500	Advanced Nanoindentation of Biomaterials
499	The Surface Tribological and Mechanical Behaviors of Silicone-based Hydrogel Materials
Zhou, M.
446	Experimental Analysis of Dynamic Deformation and Damage in Composite Sandwich Structures Subjected to Underwater Impulsive Loads
Zhou, Z.B.
155	Experimental Study on Dynamic Mechanical Properties of a Mock PBX
Zhu, D.
4	Experimental Study of Shear Behavior of Kevlar 49 Fabric
273	Scalation Pattern Increases Penetration Resistance of Striped Bass Fish Skin
2	Optimization of Multi-Layer Fabric Model for Engine Fragment Mitigation
236	Biomimetic Tapered Fibers for Enhanced Composite Toughness
Zhu, S.Q.
180	Impact of Aluminum, CFRP Laminates, Fibre-Metal Laminates and Sandwich Panels
Zhu, Y.
376	Mechanical Properties of Five-fold Twinned Silver Nanowires
378	Piezoresistive Response of Z-shaped MEMS Thermal Actuators
377	Buckling Induced Silicon Nanowire Coils on Elastomeric Substrates
Zou, L.-F.
431	Engineering Radial Deformations in Single-walled Carbon and Boron-nitride Nanotubes
Zupancic, B.
379	Generalization of CFS Methodology