SEM XII International Congress & Exposition on Experimental & Applied Mechanics

Session 000   JSA Young Investigator Lecture (Monday Morning)
9:00 AM	555	New Frontiers of Mechanics: Exploiting Nonlinearities in the Design of new Materials
		C. Daraio, California Institute of Technology
Session 000A   William M. Murray Lecture (Tuesday Morning)
9:00 AM	556	Some Curious Unresolved Problems, Speculations, and Advances in Mechanical Fastening
		G.L. Cloud, Michigan State University
Session 000B   Plenary Lecture (Wednesday Morning)
9:00 AM	515	Interface and Contact Effects in Fracture Processes
		R.V. Goldstein, Russian Academy of Sciences
Session 000C   Plenary Lecture (Thursday Morning)
9:00 AM	508	Experimental and Numerical Investigation of Thermal Deformation of Thermoelectric Coolers
		W.-C. Wang, T.-Y. Wu, National Tsing Hua University
Session 001   Role of Optical Interferometry in Advancement of Material Characterization I (Monday Morning)
10:30 AM	458	KEYNOTE: Wavefront Retrieval from Radial Hartmann Patterns
		D. Malacara-Hernandez, Centro de Investigaciones en Optica
11:30 AM	135	KEYNOTE: Scale Independent Approach to Deformation and Fracture
		S. Yoshida, Southeastern Louisiana University
12:10 PM	101	Classical Optical Interferometry for Strain Measurements
		N.G. Ohlson, The Royal Institute of Technology
Session 002   Time-Dependent Model Validation (Monday Morning)
10:30 AM	469	KEYNOTE: Elastomeric Polymers for Shockwave Mitigation and Extreme Loading Conditions
		R.G.S. Barsoum, Office of Naval Research
11:10 AM	143	Formulation and Validation of a Thermomechanical Viscoelastic/Viscoplastic Constitutive Model for Amorphous Glassy Polymer
		J.L. Bouvard, E.B. Marin, D.J. Bammann, M.F. Horstemeyer, Center for Advance Vehicular Systems
11:30 AM	106	Temperature Dependent Ductile Material Failure Constitutive Modeling With Validation Experiments
		J.F. Dempsey, B.R. Antoun, V.J. Romero, G.W. Wellman, W.M. Scherzinger, S. GrangeSandia National Laboratories
11:50 AM	331	Correlation of Structural Strain to Tip Vorticity and Lift for a MAV Pliant Membrane Wing
		T.J. Carpenter, C.W. Ray, R. Albertani, Oregon State University
12:10 PM	421	Experimental Investigation of Plastic Strain Recovery in Thin Film Nanocrystalline Metals
		N. Ghazi, C.F. Niordson, J.W. Kysar, Columbia University
Session 003   Biological Materials & Mechanics I (Monday Morning)
10:30 AM	502	KEYNOTE: Biological Materials and Mechanics: An Overview
		M. Meyers, University of California, San Diego
11:10 AM	346	High Performance Impact-tolerant and Abrasion-resistant Materials: Lessons From Nature
		Q. Wang, UC Riverside; M. Nemoto, Tokyo University of Agriculture and Technology; D. Li, Lawrence Berkeley National Labs; B. Weden, L. Wood, UC Riverside; P. Zavattieri, Purdue University; D. Kisailus, UC Riverside
11:30 AM	465	Effect of Crystallite Orientation on Nanomechanical Properties of a Nanostructured poly(KAMPS)/aragonite Composite
		C.S. Korach, Stony Brook University; R.K. Pai, International Iberian Nanotechnology Laboratory
11:50 AM	273	Scalation Pattern Increases Penetration Resistance of Striped Bass Fish Skin
		L. Szewciw, D. Zhu, F. Barthelat, McGill University
12:10 PM	61	Characterization of the Mechanical Behavior of Sunflower Stem for Bio-composite Applications
		S. Sun, Pascal Institute/Blaise Pascal University; J.D. Mathias, RSTEA; E. Toussaint, M. Grediac, Pascal Institute/Blaise Pascal University
Session 004   Devices & Fabrication I (Monday Morning)
10:30 AM	378	Piezoresistive Response of Z-shaped MEMS Thermal Actuators
		J. Ouyang, Y. Zhu, North Carolina State University
10:50 AM	487	Silicon Carbide High Temperature MEMS Capacitive Strain Sensor
		R.P. Weisenberger, R.A. Coutu, Jr., L.A. Starman, Air Force Institute of Technology
11:10 AM	485	Characterizing External Resistive, Inductive and Capacitive Loads for Micro-switches
		B.F. Toler, R.A. Coutu, Jr., Air Force Institute of Technology
11:30 AM	388	A Novel Micro-tensile Tester Using a Force-domain Analogy to Digital Converter
		W.-F. Yeh, J. Wang, University of Washington
11:50 AM	367	Mechanical Behavior of Bi-stable Buckled MEMS for Actuation and Energy Harvesting
		D.A. Porter, T.A. Berfield, University of Louisville
12:10 PM	418	Digital Image Correlation (DIC) to determine stress and strain of a nanowire loaded with a MEMS actuator in a Scanning Electron Microscope
		M. Yilmaz, J.W. Kysar, Columbia University
Session 005   Low Impedance Materials I (Monday Morning)
10:30 AM	467	Rate Dependent Response of Crosslinked Epoxy Networks
		D. Knorr, A. Schoch, J.L. Lenhart, U.S. Army Research Laboratory; D. Fischer, National Institute of Standards and Technology
10:50 AM	370	Fracture Response of Cross-linked Epoxy Resins as a Function of Loading Rate
		S.D. Whittie, P. Moy, C.A. Gunnarsson, D. Knorr, T. Weerasorriya, U.S. Army Research Laboratory
11:10 AM	366	Mechanical Response of Polycarbonate Nano-Composites as a Function of Strain Rate and Weight Percent of Nano-Silicate Clay Loading
		P. Moy, T. Weerasooriya, U.S. Army Research Laboratory; W. Chen, Purdue University
11:30 AM	382	High Rate Characterization of Polymeric Closed-Cell Foams: Challenges Related to Size Effects
		S Ouellet, Defence Research and Development Canada-Valcartier; D.S. Cronin, J. Moulton, University of Waterloo; O.E. Petel, McGill University
11:50 AM	156	What Makes Silly Putty Bounce?
		M. Niania, Imperial College; W. Chen, H. Liao, Purdue University; V.P. Chiarito, Army ERDC
12:10 PM	275	Considerations for Numerical Modeling of Dynamic Behavior of Soft Materials
		J.C. Fitzpatrick, M.J. Scheidler, U.S. Army Research Laboratory
Session 006   Optical Methods for High Strain Rate Testing (Monday Morning)
10:30 AM	95	Identification of the Heterogeneous Elasto-plastic Behaviour of FSW Welds at High Strain Rate
		G. Le Louedec,University of South Carolina/Arts et Metiers ParisTech; F. Pierron, Arts et Metiers ParisTech; M.A. Sutton, A.P. Reynolds, University of South Carolina
10:50 AM	342	Dynamic Testing of Porous Materials Using a High-speed Digital Camera and Linear Image Correlation Analysis
		Y. Wang, W. Tong, L. Wang, Southern Methodist University
11:10 AM	416	Initiation Fracture Toughness of Human Cortical Bone as a Function of Loading Rate
		C.A. Gunnarsson, B. Sanborn, M. Foster, P. Moy, T. Weerasooriya, U.S. Army Research Laboratory
11:30 AM	455	Measurements of Particle Velocity within a Kolsky Bar With Applications to Wave Separation
		D.T. Casem, M.B. Zellner, U.S. Army Research Laboratory
11:50 AM	415	Mechanical Response of Friction Stir Welded Aluminum 2139-T8 as a Function of Loading Rate and Stress-state
		C.A. Gunnarsson, T. Weerasooriya, B. Love, U.S. Army Research Laboratory
Session 007   International Student Paper Competition I (Monday Morning)
10:30 AM	541	Development and Characterization of Bio-inspired Multifunctional Sandwich Structure
		S. Haldar, University of Maryland, College Park
10:50 AM	520	Determination of Three-dimensional Deformation at Small Length Scales
		A. Gdoutou, Northwestern University
11:10 AM	521	High-strain Rate Loading Behavior of Seashell Mimetic Composites
		A. Dutta, Michigan State University
11:30 AM	522	Anisotropic Mechanical Properties of Brain Tissue Characterized by Shear and Indentation Tests
		Y. Feng, Washington University in St. Louis
11:50 AM	524	Dynamic Evaluation of Forces During Mastication
		A. Spangenberger, Worcester Polytechnic Institute
12:10 PM	551	A Methodology for Evaluating Localised Strains Using High Magnification DIC
		G. Crammond, University of Southampton
Session 008   Microscale & Microstructural Effects in Fracture & Fatigue I (Monday Morning)
10:30 AM	160	Deformation Mapping at the Microstructural Length Scale
		A.D. Kammers, S. Daly, The University of Michigan
10:50 AM	337	Molecular Tailoring of Interfacial Adhesion Using Self-assembled Monolayers
		M.E. Grady, M.D. Losego, P.V. Braun, N.R. Sottos, University of Illinois Urbana-Champaign
11:10 AM	249	Very High Cycle Fatigue Behavior Of Electroplated Ni Films
		E.K. Baumert, O.N. Pierron, Georgia Institute of Technology
11:30 AM	227	Relating Strain Fields and Microstructural Factors in Fatigue Crack Growth
		J.D. Carroll, Sandia National Laboratories; W. Abuzaid, M. Casperson, J. Lambros, H. Sehitoglu, University of Illinois at Urbana-Champaign; R. Chona, Air Force Research Laboratory
11:50 AM	383	Micromechanical Characterization of Ductile Damage in DP Steel
		J.P.M. Hoefnagels, Eindhoven University of Technology; C.C. Tasan, Max-Planck-Institut fur Eisenforschung; F.J. Peters, M.G.D. Geers, Eindhoven University of Technology
Session 009   Digital Holography (Monday Early Afternoon)
1:50 PM	456	KEYNOTE: Recent Advances in Holographic Strain and Stress Measurement
		T. Kreis, BIAS - Bremer Institut fur angewandte Strahltechnik
2:30 PM	73	Digital Holographic Microscopy by Mirau Interferometric Objective
		M. Leon-Rodriguez, R. Rodriguez-Vera, J.A. Rayas, S.A Calixto, Centro de Investigaciones en Optica
2:50 PM	491	3D Deformations and Shape Measurements of Tympanic Membranes by Multi-wavelength Lensless Digital Holography
		W. Lu, C. Furlong, Worcester Polytechnic Institute; J.J. Rosowski, E.J. Harrington, S.N. Merchant, Massachusetts Eye and Ear Infirmary/MIT-Harvard Division of Health Sciences and Technology
3:10 PM	489	Digital Holographic Otoscope for Measurements of the Human Tympanic Membrane In-vivo
		I.T. Dobrev, E.J. Harrington, Worcester Polytechnic Institute; T. Cheng, Massachusetts Eye and Ear Infirmary; C. Furlong, Worcester Polytechnic Institute; J.J. Rosowski, Massachusetts Eye and Ear Infirmary
Session 010   Small-Scale & Dissipative Mechanisms in Failure (Monday Early Afternoon)
1:50 PM	433	Inverse Measurement of Stiffness by the Normalization Technique for J-integral Fracture Toughness
		E.N. Brown, Los Alamos National Laboratory
2:10 PM	393	Energy Dissipation Mechanism in Nanocomposites Studied via Molecular Dynamics Simulation
		N.M. Lacevic, S.P. Joshi, NextGen Aeronautics, Inc.
2:30 PM	2	Optimization of Multi-Layer Fabric Model for Engine Fragment Mitigation
		D. Zhu, Hunan University; B. Mobasher, S.D. Rajan, Arizona State University
Session 011   Cell Mechanics (Monday Early Afternoon)
1:50 PM	29	Quantification of Cellular Tractions in a Fibrin Matrix Using 3D TFM
		J. Notbohm, A. Lesman, D.A. Tirrell, G. Ravichandran, California Institute of Technology
2:10 PM	25	Long-range Mechanical Force Enables Self-assembly of Epithelial Tubules
		C. Guo, M. Ouyang, J-.Y. Yu, California Institute of Technology
2:30 PM	321	Effects of Membrane Composition and Cytoskeletal Proteins on Membrane Mechanics
		N. Khatibzadeh, University of California-Riverside; B. Farrell, W.E. Brownell, Baylor College of Medicine; B. Anvari, University of California-Riverside
Session 012   MEMS & Nanotechnology Keynotes (Monday Early Afternoon)
1:50 PM	103	KEYNOTE: Principles Involved in Interpreting Single-Molecule Force Measurement of Biomolecules
		S.S. Wijeratne, N.C. Harris, C. Kiang, Rice University
2:30 PM	477	KEYNOTE: Measurement of the Gold-Gold Bond Rupture Force at 4 K in a Single-atom Chain Using Photon-momentum-based Force Calibration
		D.T. Smith, J.R. Pratt, National Institute of Standards and Technology
Session 013   Novel Testing Techniques I (Monday Early Afternoon)
1:50 PM	233	Characterization and Modeling of Polymeric Matrix Under Static and Dynamic Loading
		B.T. Werner, I.M. Daniel, Northwestern University
2:10 PM	243	Study on Penetration Equation by Experimental Investigation on Penetration into Wax
		H. Park, W. Chen, Purdue Univeristy
2:30 PM	320	Micro-Tensile Tests of Aluminum Thin Foil With the Variation of Strain Rate
		J.B. Kwon, J.H. Huh, H. Huh, Korea Advanced Institute of Science and Technology; J.S. Kim, Korea Railroad Research Institute
2:50 PM	363	A New Technique for Monitoring Inhomogeneous Deformation During Flyer Plate Impact
		J.D. Walker, D.J. Grosch, S. Chocron, K.A. Dannemann, R.P. Bigger, T.Z. Moore, T.T. Kirchdoerfer, Southwest Research Institute
Session 014   Materials Response I (Monday Early Afternoon)
1:50 PM	187	Mechanical Behavior of SS 304LN at High Strain Rates in Compression
		S.V. Prasad, K.N. Jonnalagadda, Indian Institute of Technology Bombay
2:10 PM	27	Measurement of Strength at High Pressures Using Oblique Shock Waves
		V. Stolyar, G. Ravichandran, California Institute of Technology
2:30 PM	76	Plasticity and Ballistic Characterization of a new Armour Steel
		J.N. Bester, W.E. Stumpf, University of Pretoria
2:50 PM	44	Fish-tank Approach to Evaluate Dynamic Failure and Durability of Marine Composites
		L.R. Xu, University of Texas at El Paso; A. Krishnan, Vanderbilt University
Session 015   International Student Paper Competition II (Monday Early Afternoon)
1:50 PM	526	Stress Intensity Factor Extraction in a 3D Crack Propagation Experiment
		F. Mathieu, ENS Cachan/CNRS/UPMC/PRES UniverSud Paris
2:10 PM	528	Prediction of the Drop Test Performance of Printed Circuit Boards
		P.F. Fuchs, University of Leoben
2:30 PM	535	Low CTE Bimetallic Thin Films: Fabrication, Testing and Characterization Challenges
		E. Gdoutos, California Institute of Technology
2:50 PM	537	A Thin Shell Inflation Test Method for Anisotropic Human Skin Tissues
		T.M. Koys, Johns Hopkins University
Session 016   Microscale & Microstructural Effects in Fracture & Fatigue II (Monday Early Afternoon)
1:50 PM	386	Fracture Between Short Molecules
		S.R Na, A. Hassan, J. Montanez, M.J Krische, UT Austin; Y.J. Chabal, O. Seitz, T. Peixoto, UT Dallas
2:10 PM	210	A Versatile Microelectromechanical System for Fatigue Testing of Nanostructures
		E Hosseinian, B. Pant, B.L. Allen, E.K. Baumert, O.N. Pierron, Georgia Institute of Technology
2:30 PM	15	MEMS Device for Fatigue Testing 25 Micrometer Thick Aluminum Specimens
		L.A. Liew, National Institute of Standards and Technology/University of Colorado; D.T. Read, N. Barbosa, III., National Institute of Standards and Technology
2:50 PM	216	High Confdencee Level Calibration for AFM Based Fracture Testing of Nanobeams
		S. Grutzik, Cornell University; R. Gates, Y. Gerbig, R.F. Cook, National Institute of Standards and Technology; M.A. Hines, A.T. Zehnder, Cornell University
Session 017   Advances in Measurements of Displacement Fields Utilizing Wave-Lengths From X-Rays to Visible Light (Monday Late Afternoon)
4:10 PM	246	KEYNOTE: Optical Fourier Transforms in the Nano Range
		C.A. Sciammarella, F.M. Sciammarella, Northern Illinois University; L. Lamberti, Politecnico di Bari
4:50 PM	364	3D/4D Strain Mapping Using In-situ X-ray Microtomography
		H. Toda, Toyohashi University of Technology; K. Uesugi, A. Takeuchi, Y. Suzuki, Japan Synchrotron Radiation Research Institute; M. Kobayashi, Toyohashi University of Technology
5:10 PM	90	Dynamic Thermal Deformation Measurement Technique for Large-scale High Temperature Piping
		S. Ri, National Institute of Advanced Industrial Science and Technology (AIST); M. Saka, Tohoku University; K. Nanbara, D. Kobayashi, Chubu Electric Power Co., Inc.
5:30 PM	463	Hybrid Characterization of Laminated Wood With ESPI and Optimization Methods
		C. Barile, C. Casavola, G. Pappalettera, C. Pappalettere, Politecnico di Bari
Session 018   Thermomechanics & Coupled Phenomena I (Monday Late Afternoon)
4:10 PM	513	KEYNOTE: A Thermodynamical Framework for Chemically Reacting Systems
		K.R. Rajagopal, Texas A&M University
4:50 PM	142	Formulation a Thermomechanical Internal State Variable Constitutive Model for Elastomers
		J.L. Bouvard, D.J. Bammann, M.F. Horstemeyer, Center for Advance Vehicular Systems
5:10 PM	86	Determination of stresses in drying wood by means of a viscoelastic relaxation model
		O. Saifouni, Universite Blaise Pascal, CNRS; R. Moutou Pitti, Universite Blaise Pascal, CNRS, CENAREST; J.F. Destrebecq, Universite Blaise Pascal, CNRS
5:30 PM	402	A Gibbs Potential Based Implicit Approach for Modeling Viscoelastic Solids
		A.R. Srinivasa, Texas A&M University Qatar; K.R. Rajagopal, P. Alagappan, Texas A&M University
5:50 PM	317	Multiscale Modeling of Mechanoresponsive Polymers
		M.N. Silberstein, C.M. Kingsbury, K. Min, S.B. Kramer, B.A. Beiermann, N.R. Aluru, S.R. White, N.R. Sottos, University of Illinois at Urbana-Champaign
Session 019   Biological Materials & Mechanics II (Monday Late Afternoon)
4:10 PM	239	Interfacial Fracture Toughness of Nacre
		R. Rabiei, A. Khayer Dastjerdi, F. Barthelat, McGill University
4:30 PM	413	New Insight into the Toughening Mechanisms of Nacre
		B.C. Prorok, Auburn University, Auburn University
4:50 PM	470	Thermal Analyses of Dental Ceramic Restorations
		B. Hojjatie, W. Bartholomew, Valdosta State University; H. Garmestani, Georgia Tech
5:10 PM	272	Visualization of Micro-cracks in Compact Bovine Bone
		S.A. Tekalur, W. Zhang, A. Vanderklok, Michigan State University
Session 020   Measurement Challenges in Single Molecule/Single Atom Mechanical Testing I (Monday Late Afternoon)
4:10 PM	114	A Precision Force Microscope for Biophysics
		G.M. King, University of Missouri; A.B. Churnside, T.T. Perkins, JILA/NIST/University of Colorado
4:30 PM	159	Mass Spectrometry With Nanoelectromechanical Systems
		S. Kelber, California Institute of Technology
4:50 PM	387	Molecular Adhesion
		K. Yue, Z. Cao, S. Na, K. Liechti, University of Texas, Austin
5:10 PM	311	Optimized Calibration for Single-molecule Instruments
		B.M. Lansdorp, O.A. Saleh, University of California Santa Barbara
5:30 PM	452	DNA Molecular Recognition Using AFM Nanometrology
		C.H. Hsueh, M.L. Lam, R.H. Kjolby, University of California, Los Angeles; A. Sundstrom, B. Mishra, New York University; J.K. Gimzewski, J. Reed, University of California, Los Angeles
5:50 PM	401	Hydrodynamic Force Compensation for Single-molecule Mechanical Testing Using Colloidal Probe Atomic Force Microscopy
		G. A. Shaw, National Institute of Standards and Technology
Session 021   Low Impedance Materials II (Monday Late Afternoon)
4:10 PM	168	Inertia Effects in High-rate Compression Experiments of Soft Materials
		X. Nie, Purdue University; B. Sanborn, T. Weerasooriya, U.S. Army Research Laboratory; W. Chen, Purdue University
4:30 PM	468	Challenges for Implementing Polymer Gels in Defense Applications
		J.L. Lenhart, R.A. Mrozek, U.S. Army Research Laboratory; K.R. Shull, K.J. Otim, Northwestern University
4:50 PM	355	Mode I Fracture Response of Polymer Based Gelatins as a Function of Loading Rate
		M. Foster, P. Moy, C.A. Gunnarsson, T. Weerasooriya, J. Lenhart, R. Mrozek, U.S. Army Research Laboratory
5:10 PM	164	Impact Response of Ballistic Gelatin
		D.S. Cronin, University of Waterloo; A. Bouamoul, D. Bourget, DRDC Valcartier
5:30 PM	296	Determination of Simple Shear Material Properties of the Brain at High Strain Rates
		K.A. Ott, R.A. Armiger, A.C. Wickwire, A.S. Iwaskiw, A.C. Merkle, The Johns Hopkins University
5:50 PM	26	Injury Potential of Shock Induced Compressive Waves on Human Bone
		A.M. Bailey, S. Boruah, J.J. Christopher, B.C. Bennett, M. Shafieian, University of Virginia; D.S. Cronin, University of Waterloo; R.S. Salzar, University of Virginia
Session 022   Materials Response II (Monday Late Afternoon)
4:10 PM	328	Deformation Twinning in Pure Magnesium at High Strain Rates
		N. Dixit, K.T. Ramesh, Johns Hopkins University
4:30 PM	218	Aluminum and Magnesium Alloy Penetration Damage
		D.T. Martinez, S.J. Perez-Bergquist, E.K. Cerreta, G.T. Gray, III, C.P. Trujillo, Los Alamos National Laboratory
4:50 PM	194	Indentation and Dynamic Compression Experiments on Microcrystalline and Nanocrystalline Nickel
		S. Rajaraman, K.N. Jonnalagadda, Indian Institute of Technology Bombay; P. Ghosh, Indian Institute of Science, Bangalore
5:10 PM	211	Plastic Deformation of Ti-6Al-4V Plate over a Wide Range of Loading Conditions
		J.T. Hammer, R.S. Yatnalkar, J.D. Seidt, A. Gilat, The Ohio State University
5:30 PM	514	Deformation Mechanisms in Mn+1AXn Phase Ternary Ceramics at High Strain Rates
		R. Bhattacharya, N.C. Goulbourne, University of Michigan, Ann Arbor
Session 023   International Student Paper Competition III (Monday Late Afternoon)
4:10 PM	516	The Effect of Grain Size on Strain Localization in Aluminum
		A.D. Kammers, University of Michigan
4:30 PM	542	Experimental System for the Study of Dynamic Contact Between Microparticles
		W.-H. Lin, California Institute of Technology
4:50 PM	549	Interfacial Self-healing for Advanced Composites
		A. Jones, University of Illinois Urbana-Champaign
5:10 PM	525	Mechanical Properties of Major and Minor Ampullate Spider Silks
		M. Hudspeth, Purdue University
5:30 PM	553	Effect of Strain Rate and Temperature on Dynamic Deformation of Nanolaminated Ti2AlC
		S. Abotula, University of Rhode Island
5:50 PM	554	Assessment of Isothermal Aging on the Thermal Fatigue Strength of Solders
		P. Chauhan, University of Maryland, College Park
Session 024   Thermomechanics & Infra-Red Imaging (Monday Late Afternoon)
4:10 PM	380	Damage Assessment in Composite Materials for Remnant Life Prediction
		R.K. Fruehmann, J.M. Dulieu-Barton, University of Southampton
4:30 PM	148	Application of Projection Moiré in Electronic Packaging and Assembly for Post-surface Mount Warpage Measurements
		C. Kovalchick, Intel Corporation, S. Walwadkar, Intel Corporation, A. McAllister, Intel Corporation
4:50 PM	345	Finite Element Modelling of Pulse Phase Thermography for Defect Detection
		R.C. Waugh, J.M. Dulieu-Barton, S. Quinn, University of Southampton
5:10 PM	334	Thermoelastic Stress Analysis of Mechanical Fasteners
		A.A. Khaja, University of Wisconsin; A.R. Kaliyanda, Cummins, Inc.; W.A. Samad, R.E. Rowlands, University of Wisconsin
5:30 PM	348	Through-thickness Load Transfer in Adhesively Bonded Composite Joints
		G. Crammond, S.W. Boyd, J.M. Dulieu-Barton, University of Southampton
5:50 PM	217	Thermal Infrared Imaging to Study Microstructural Damage and Failure in Aluminum Alloys
		B.R. Antoun, B. Song, Sandia National Laboratories
Session 025   Role of Optical Interferometry in Advancement of Material Characterization II (Tuesday Morning)
10:30 AM	117	Quantitative Evaluation of the Nano-scaled Polymeric Film System
		T.S. Park, I.K. Park, Seoul National University of Science and Technology; C. Miyasaka, B.R. Tittmann, The Pennsylvania University
10:50 AM	136	Opto-acoustic Technique to Evaluate Adhesion Strength of Nano-scale Systems
		S. Yoshida, Southeastern Louisiana University; K. Gomi, Tokyo Denki University; S. Adhikari, P.F. Flowers, K. Dreux, Southeastern Louisiana University
11:10 AM	174	Evaluation of Dynamic Deformation Behavior of Aluminum Alloy by Electronic Speckle Pattern Interferometry
		T. Sasaki, H. Suzuki, Niigata University; S. Yoshida, Southeastern Louisiana University
11:30 AM	175	Effect of Loading History of Aluminum on Fringe Pattern in Electronic Speckle Pattern Interferometry
		H. Suzuki, T. Sasaki, T. Watanabe, Niigata University; S. Yoshida, Southeastern Louisiana Unviersity
11:50 AM	133	Optical Interferometric Study on Loading Hysteresis
		J. Gaffney, University of New Orleans; D. Hoover, Southeastern Louisiana University; K. Sunaga, Yokohama National University; D. Tajiri, T. Yamazaki, S. Yoshida, Southeastern Louisiana University
Session 026   Strain-Rate & Frequency Effects (Tuesday Morning)
10:30 AM	498	KEYNOTE: Free Volume and Rate/Temperature-Sensitive Yield-like Behavior of Rigid Polymers
		W.G. Knauss, California Institute of Technology
11:10 AM	293	An Identification Method for the Viscoelastic Characterization of Materials
		D. Yang, Day Software Systems, Inc.
11:30 AM	262	Experimental Investigation of Failure in Viscoelastic Elastomers Under Combined Shear and Pressure
		M. Alkhader, Stony Brook University; W.G. Knauss, G. Ravichandran, California Institute of Technology
11:50 AM	230	Hybrid Polymer Grafted Nanoparticle Composites for Blast-induced Shock-wave Mitigation
		K. Holzworth, G. Williams, S. Nemat-Nasser, University of California, San Diego
Session 027   Mechanics of Biomimetic Materials (Tuesday Morning)
10:30 AM	28	KEYNOTE: Humanlike Robots - Synthetically Mimicking Humans
		Y. Bar-Cohen, Jet Propulsion Laboratory/California Institute of Technology
11:10 AM	312	Porous Hydroxyapatite-polyhydroxybutyrate Composites Fabricated by a Novel Method via Centrifugation
		M.M. Porter, S. Lee, University of California, San Diego; N. Tanadchangsaeng, M.J. Jaremko, J. Yu, University of Hawaii at Manoa; M.A. Meyers, J. McKittrick, University of California, San Diego
11:30 AM	315	Isolation of Collagen From Cortical Bovine Bone for Preparation of Porous Collagen Sponges
		A.B. Castro-Ceseńa, E.E. Novitskaya, A. Phadke, S. Varghese, J. McKittrick, University of California, San Diego
11:50 AM	323	Size Effects in Biomineralized and Biomimetic Materials
		I. Gallana, P.D. Zavattieri, Purdue University
Session 028   Nanoindentation (Tuesday Morning)
10:30 AM	412	New Insight into Pile-Up in Thin Film Indentation
		K. Schwieker, J. Frye, B.C. Prorok, Auburn University
10:50 AM	68	Strain-Rate Sensitivity (SRS) of Nickel by Instrumented Indentation
		J.L. Hay, Agilent Technologies; V. Maier, K. Durst, M. Goken, University Erlangen-Nuremberg
11:10 AM	376	Mechanical Properties of Five-fold Twinned Silver Nanowires
		Q. Qin, F. Xu, Y. Zhu, North Carolina State University
11:30 AM	430	Radial Mechanical Properties of Boron Nitride Nanotubes
		M. Zheng, X.-M. Chen, I.-T. Bae, C.-H. Ke, State University of New York at Binghamton; C. Park, National Institute of Aerospace; M.W. Smith, NASA Langley Research Center; K. Jordan, Thomas Jefferson National Accelerator Facility
11:50 AM	400	Mechanics of Graphene and Other Two-dimensional Materials
		R.C. Cooper, A. Hammerberg, A. Hurst, G.H. Lee, C.A. Marianetti, J. Hone, J.W. Kysar, Columbia University
Session 029   Novel Testing Techniques II (Tuesday Morning)
10:30 AM	30	A Miniature Impact Tester for Dynamic Testing of Small Specimens
		J.F. Liu, Nanyang Technological University; V.P.W. Shim, V.B.C. Tan, National University of Singapore
10:50 AM	202	A Digital Gradient Sensing (DGS) Method for Evaluating Stress Gradients in Transparent Armor Materials at Elevated Rates of Loading
		C. Periasamy, H. Hareesh Tippur, Auburn University
11:10 AM	292	Kolsky Tension Bar for Samples with Very Low Strength
		M.C. Hudspeth, X. Nie, W. Chen, Purdue University
11:30 AM	57	Preloaded High-rate Tension Techniques
		B. Song, W.-Y. Lu, Sandia National Laboratories
11:50 AM	302	Microstructure Evolution of UFG Al-1100 During High Temperature Kolsky Bar Experiments
		E.L. Huskins, K.T. Ramesh, The Johns Hopkins University
Session 030   Multi-Scale Modeling of Dynamic Behavior of Materials I (Tuesday Morning)
10:30 AM	81	Spinel Modeling Embedded With Small Diameter Surface Transparent Material Particles
		C.G. Fountzoulas, U.S. Army Research Laboratory
10:50 AM	67	Effect of Particle Size Distribution on the Response of Metal-matrix Composites
		B.A. McWilliams, U.S. Army Research Laboratories; K.T. Ramesh, Johns Hopkins University; C.F. Yen, U.S. Army Research Laboratories
11:10 AM	169	Molecular Dynamics Simulation on Plastic Deformation of Nanocrystalline Copper
		G. Lu, S. Wang, G. Zhang, Institute of Applied Physics and Computational Mathematics
11:30 AM	66	Nano-scale Investigation of Microstructural Phenomenon Contributing to Toughening of Nanoparticulate Reinforced Polymers
		R.L. Karkkainen, T. Walter, A. Bujanda, U.S. Army Research Laboratory
11:50 AM	294	Peridynamic Simulations of Infinite Regions Using a Perfectly Matched Layer
		R.A. Wildman, G.A. Gazonas, U.S. Army Research Laboratory
Session 031   Composite Joining for Heavy Duty Applications (Tuesday Morning)
10:30 AM	497	KEYNOTE: The Challenge and Opportunities of Composite Joining
		D.W. Templeton, U.S. Army Tank-Automotive Research, Development and Engineering Center
11:10 AM	43	Failure due to Notch and Interface Interaction in Bi-material Joints
		L.R. Xu, University of Texas at El Paso; A. Krishnan, Michigan State University
11:30 AM	301	Evaluating Bolted Joint Strength at High Strain Rates
		S.A. Tekalur, A. Vanderklok, W. Zhang, A. Dutta, Michigan State University
11:50 AM	399	Fibrillation Delamination Micro-mechanics in Polymer-metal Interfaces
		J. Neggers, J.P.M. Hoefnagels, O. van der Sluis, B.G. Vossen, M.G.D. Geers, Eindhoven University of Technology
12:10 PM	176	Impact Behavior of Composite PI/T-joints With Nano-graphene Adhesives
		M. Haq, Michigan State University; E.A. Patterson, University of Liverpool; L.T. Drzal, Michigan State University
Session 032   Technology Applications I (Tuesday Morning)
10:30 AM	558	Examples of Residual Stress Measurement With Prism - Hole-drilling and ESPI
		T.J. Rickert, R.M. Fix, American Stress Technologies, Inc.
10:50 AM	559	Deformation Field Characterization in Machining Processes Using High- Speed Imaging & Particle Image Velocimetry
		S. Daicos, The Cooke Corporation
11:10 AM	564	Techniques and Principles Using the Shimadzu HPV-2 In-Situ Storage Camera and an Invisible Vision System With sub 100 Nano Second Exposures
		T. Rumbaugh, Hadland Imaging LLC/Shimadzu/Invisible Vision
11:30 AM	563	Recent Developments in a Novel Dynamic Testing Technique for Advanced Nanoscale Mechanical Property Measurements
		J.P. Schirer, Hysitron, Inc
Session 033   3D Imaging (Tuesday Early Afternoon)
1:50 PM	341	KEYNOTE: Lensfree Microscopy and Tomography on a Chip
		A. Ozcan, University of California, Los Angeles
2:50 PM	137	Techniques for 3D Non-destructive Grain Orientation Mapping of Polycrystals
		A. Godfrey, Tsinghua University; H.H. Liu, California Institute of Technology; S. Schmidt, H.F. Poulsen, X. Huang, Technical University of Denmark
Session 034   Thermomechanics & Coupled Phenomena II (Tuesday Early Afternoon)
1:50 PM	303	A Thermodynamic State Driven Nonlinear Viscoelastic Constitutive Model
		G.A. Arzoumanidis, Psylotech, Inc.; K.M. Liechti, University of Texas, Austin; W. Wangard, Engrana, LLC
2:10 PM	111	Large-Strain Time-Temperature Equivalence and Adiabatic Heating of Polyethylene
		J. Furmanski, E.N. Brown, C.M. Cady, Los Alamos National Laboratory
2:30 PM	77	New Thermo-mechanical Modelling for Visco Elastic, Visco Plastic Polymers
		N. Billon, Mines-ParisTech, CEMEF
Session 035   Mechanics of Brain Tissues & Structures (Tuesday Early Afternoon)
1:50 PM	41	Pressure-deformation-injury Maps for Brain Tissue Subjected to High Rate Loading
		M. Sarntinoranont, M.A. King, Y. Hong, S.J. Lee, G. Subhash, University of Florida
2:10 PM	206	An Immersed Finite Element Method Approach for Brain Biomechanics
		S. Roy, The Pennsylvania State University; L. Heltai, Scuola Internazionale Superiore di Studi Avanzati; C.S. Drapaca, F. Costanzo, The Pennsylvania State University
2:30 PM	449	Brain Mechanical Imaging (BMI)
		S.F. Othman, T. Boulet, H. Xu, University of Nebraska - Lincoln; M. Kelso, University of Nebraska Medical Center
2:50 PM	352	Characterization of Murine Glioma by Magnetic Resonance Elastography: Preliminary Results
		E.H. Clayton, J.A. Engelbach, J.R. Garbow, P.V. Bayly, Washington University in St. Louis
Session 036   Devices & Fabrication II (Tuesday Early Afternoon)
1:50 PM	215	Frequency Multiplication and Demultiplication in MEMS
		D.B. Blocher, A.T. Zehnder, R.H. Rand, Cornell University
2:10 PM	484	Surface Micromachined Contact Support Structure for Microswitch Lifecycle Testing
		R.A. Coutu Jr., L.A. Starman, T.A. Edelmann, Air Force Institute of Technology
2:30 PM	509	Contamination Thresholds of Pt- and RuO2-coated Microrelays
		V. Brand, Carnegie Mellon University; M.S. Baker, Sandia National Laboratories; M.P. de Boer, Carnegie Mellon University
2:50 PM	486	Characterizing Metal Insulator Transition (MIT) Materials for use as Micro-switch Elements
		B.L. Danner, R.A. Coutu, Jr., Air Force Institute of Technology
3:10 PM	54	Stiction Failure in Microswitches due to Elasto-plastic Adhesive Contact
		L. Wu, Universite de Liege/Northwestern Polytechnical University; J.-C. Golinval, L. Noels, Universite de Liege
Session 037   Novel Testing Techniques III (Tuesday Early Afternoon)
1:50 PM	62	Dynamic Behavior and Numerical Modeling of Titanium 15-3-3-3 Alloy
		M. Hokka, T. Leemet, Tampere University of Technology; A. Shrot, M. Baker, Technical University of Braunschweig; V.-T. Kuokkala, Tampere University of Technology
2:10 PM	313	Effect of Temperature on Texture Evolution in Tantalum During Dynamic-extrusion
		C.P. Trujillo, J.P. Escobedo-Diaz, G.T. Gray III, E.K. Cerreta, D.T. Martinez, Los Alamos National Laboratory
2:30 PM	254	Dynamic Load Measurement of Ballistic Gelatin Impact Using an Instrumented Tube
		J.D. Seidt, The Ohio State University; J.M. Pereira, NASA Glenn Research Center; J.T. Hammer, A. Gilat, The Ohio State University
2:50 PM	190	High Strain Rate Characteristics of Fiber Bragg Grating Strain sensors
		W.J. Lin, L. Tsai, C.C. Chiang, National Kaohsiung University of Applied Science; S.H. Wang, I-Shou University
Session 038   Multi-Scale Modeling of Dynamic Behavior of Materials II (Tuesday Early Afternoon)
1:50 PM	65	Cyclic Plasticity Under Shock Loading in an HCP Metal
		M.B. Prime, C.D. Adams, T.R. Canfield, S.R. Chen, Los Alamos National Laboratory
2:10 PM	82	Material Models Sensitivity of Tungsten-based Penetrators Impacting on Confined Boron-carbide
		C.G. Fountzoulas, J.C. Lasalvia, U.S. Army Research Laboratory
2:30 PM	305	3D Mechanism-based Modeling of the Dynamic Failure of Brittle Materials
		G. Hu, J. Kimberley, K.T. Ramesh, Johns Hopkins University
2:50 PM	279	Damage & the Electromechanical Behavior of Piezoelectric Ceramics
		L.E. Lamberson, K.T. Ramesh, Johns Hopkins University; G. Gazonas, Army Research Laboratory
Session 039   Advances in Fastening and Joining (Tuesday Early Afternoon)
1:50 PM	354	KEYNOTE: Fastening and Joining of Composite Materials
		S.A. Nassar, X. Yang, Oakland University
2:30 PM	214	Inter-Cellular Joining for Amorphous Honeycombs
		B. Jayakumar, M. Allahkarami, J.C. Hanan, Oklahoma State University
Session 040   Technology Applications II (Tuesday Early Afternoon)
1:50 PM	560	A Solution for Making DIC Measurements Across Multiple Measurement Areas With a Single Loading on an Aircraft Undercarriage by Using a new, State-of-the-art Handheld DIC system
		M. Crompton, Dantec Dynamics, Inc.
2:10 PM	562	Ultra High Speed Cerberus Multi Head Imaging System for 3D and D.I.C. Applications
		F. Kosel, Specialised Imaging, Inc.
2:30 PM	561	High-Speed Vibration Measurements Using Digital Image Correlation
		A. Tofts, Correlated Solutions Inc.
2:50 PM	565	Advanced Applications of 3D Digital Image Correlation
		Vinh Tran, Trilion Quality Systems
Session 041   Contouring of Surfaces (Tuesday Late Afternoon)
3:50 PM	123	KEYNOTE: Recent Developments in the Contouring of Surfaces
		C.A. Sciammarella, Northern Illinois University; A. Boccaccio, L. Lamberti, C. Pappalettere, Politecnico di Bari
4:30 PM	244	Optical Head as a Gauge Device in Manufacturing
		F.M. Sciammarella, C.A. Sciammarella, Northern Illinois University; L. Lamberti, Politecnico di Bari; M. Styrcula, Northern Illinois University
4:50 PM	369	Comparison of Contouring Techniques Applied to Sheet Metal Testing
		G. Chiappini, M. Sasso, Universitŕ Politecnica delle Marche; M. Rossi, Arts et Métiers ParisTech
5:10 PM	274	Application of Contouring to Dental Reconstruction
		C. Casavola, L. Lamberti, G. Pappalettera, C. Pappalettere, Politecnico di Bari
5:30 PM	494	Shape and Deformation Measurements by High-resolution Fringe Projection Methods
		C. Ti, T. Sanbhor, C. Furlong, Worcester Polytechnic Institute
Session 042   Process Models & Measurements (Tuesday Late Afternoon)
3:50 PM	379	Generalization of CFS Methodology
		M. Gergesova, I. Saprunov, B. Zupancic, I. Emri, University of Ljubljana
4:10 PM	368	Solution Approach for Coupled Diffusion-reaction-deformation Problems in Anisotropic Materials
		R.B. Hall, Air Force Research Laboratory; H. Gajendran, A. Masud, University of Illinois at Urbana-Champaign; K.R. Rajagopal, Texas A&M University
4:30 PM	186	Effect of Crushing Method of Wasted Tire on Mechanical Behavior on PLA Composites
		T. Sakai, Tokyo Metropolitan University; T. Morikiyo, Aoyama Gakuin University; C.R. Rios-Soberanis, Unidad de Materiales, Centro de Investigación Científica de Yucatán; S. Yoneyama, Aoyama Gakuin University; S. Wakayama, Tokyo Metropolitan University
4:50 PM	115	Simultaneous Measurement of the Rates of Polymerization Shrinkage and Elastic Modulus Development
		A Giuseppetti, American Dental Association Foundation; M. Chiang, National Institute of Standards and Technology
5:10 PM	276	Visualization of Material Flow in Machining and Sliding Indentation Processes
		Y. Guo, E.P. Gnanamanickam, N.K. Sundaram, M. Efe, Purdue University; T.G. Murthy, Indian Institute of Science; C. Saldana, Pennsylvania State University; S. Chandrasekar, Purdue University
5:30 PM	454	Dynamic Shape and Strain Measurements of Rotating Tire in Time-series
		M. Fujigaki, K. Shimo, Wakayama University
Session 043   Mechanics of Bone & Related Materials (Tuesday Late Afternoon)
3:50 PM	314	Correlation of Multi-scale Modeling and Experimental Results for the Elastic Moduli of Cortical and Trabecular Bone
		E. Novitskaya, University of California, San Diego; E. Hamed, J. Li, I. Jasiuk, University of Illinois at Urbana-Champaign; J. McKittrick, University of California, San Diego
4:10 PM	409	Evaluation of Composite Bone Cement for Orthopedic Applications
		F. Albahadily, C. Ballenger, Y. Li, P. Liu, M. Vaughan, M. Khandaker, University of Central Oklahoma
4:30 PM	339	On the Compression Testing of Small Trabecular Bone Samples
		H. Yao, W. Tong, L. Wang, Southern Methodist University
4:50 PM	31	Quasi-static Compressive and Tensile Test on Cancellous Bone in Human Cervical Spine
		J.F. Liu, Nanyang Technological University; V.P.W. Shim, National University of Singapore; P.V.S. Lee, University of Melbourne, Australia
5:10 PM	222	Utilizing Digital Image Correlation to Capture Strains in Dental Applications
		B. LaCroix, P. Ifju, K. Soderholm, S. Geraldeli, University of Florida
Session 044   Measurement Challenges in Single Molecule/Single Atom Mechanical Testing II (Tuesday Late Afternoon)
3:50 PM	476	Nanomechanics of cross-linking molecules identified through in-situ SEM peeling
		H.D. Espinosa, M. Naraghi, M. Roenbeck, Z. An, S.T. Nguyen, Northwestern University
4:10 PM	58	High Resolution Atomic Force Microscopy With a Fiber Interferometer
		H.I. Rasool, J.K. Gimzewski, University of California - Los Angeles
4:30 PM	289	Simultaneous Measurement of Force and Conductance Across Single Molecule Junctions
		S.V. Aradhya, M. Frei, Columbia University; M. S. Hybertsen, Brookhaven National Laboratories; L. Venkataraman, Columbia University
4:50 PM	329	High Speed Magnetic Tweezers at 10,000 fps With Reflected Hg-lamp Illumination
		B.M. Lansdorp, O.A. Saleh, University of California, Santa Barbara
5:10 PM	488	Etching Silicon Dioxide for CNT Field Emission Device
		N.E. Glauvitz, R.A. Coutu, Jr., P.J. Collins, L.A. Starman, Air Force Institute of Technology
5:30 PM	431	Engineering Radial Deformations in Single-walled Carbon and Boron-nitride Nanotubes
		M. Zheng, L.-F. Zou, H. Wang, State University of New York at Binghamton; C. Park, National Institute of Aerospace; C.-H. Ke, State University of New York at Binghamton
5:50 PM	403	Frequency Modulated Force Metrology
		G.A. Shaw, NIST
Session 045   Shock/Blast Loading of Materials I (Tuesday Late Afternoon)
3:50 PM	170	Equation of State of Explosive Detonation Products
		Y. Zhao, H. Liu, G. Lu, Institute of Applied Physics and Computational Mathematics
4:10 PM	55	Pressure-Shear Loading of Granular Materials
		T.J. Vogler, C.S. Alexander, T.F. Thornhill, W.D. Reinhart, Sandia National Laboratories
4:30 PM	113	Incipient and Progressive Damage in Polyethylene Under Extreme Tensile Conditions
		J. Furmanski, E.N. Brown, C.P. Trujillo, D.T. Martinez, G.T. Gray, III, Los Alamos National Laboratory
4:50 PM	446	Experimental Analysis of Dynamic Deformation and Damage in Composite Sandwich Structures Subjected to Underwater Impulsive Loads
		S. Avachat, M. Zhou, Georgia Institute of Technology
5:10 PM	78	Failure Characterization of AA 2024 T3 Panel Subjected to Close-In Blast
		T. Sano, C.G. Fountzoulas, C.F. Yen, U.S. Army Research Laboratory; C.C. Chen, U.S. Department of Homeland Security; M.W. Nansteel, Battelle Memorial Institute
5:30 PM	228	Milled Glass Reinforced Polyurea Composites: the Effect of Surface Treatment
		Z. Jia, K. Holzworth, S. Nemat-Nasser, University of California, San Diego
Session 046   Composites I (Tuesday Late Afternoon)
3:50 PM	392	Shock Waves in a Model Particulate Composite
		M.B. Rauls, G. Ravichandran, California Institute of Technology
4:10 PM	299	Performance Evaluation of a Composite Armor Concept by Finite Element Simulations of Ballistic Tests
		A.R. Bhat, B. Jayakumar, J.C. Hanan, Oklahoma State University
4:30 PM	14	Ballistic Impact on Woven Glass/Epoxy Composites at High and Low Temperatures
		Y. Budhoo, Vaughn College of Aeronautics and Technology; F. Delale, B. Liaw, City College of New York
4:50 PM	19	Comparison of Mechanical Properties of Polymer-based Multi-phase Particulate Composites
		J.L. Jordan, J.E. Spowart, Air Force Research Laboratory
5:10 PM	181	Energy Absorption of Sandwich Tubes under Lateral Loading
		Z. Fan, Nanyang Technological University; J. Shen, Swinburne University of Technology; G. Lu, Nanyang Technological University; D Ruan, Swinburne University of Technology
5:30 PM	139	Improvement of Dynamic Properties of PLLA/PBAT Polymer Alloys Using Dialkyl Peroxide
		M. Nishida, H. Ichihara, H. Watanabe, Nagoya Institute of Technology; N. Fukuda, H. Ito, Aichi Industrial Technology Institute
Session 047   Modeling & Validation of Composite Joints (Tuesday Late Afternoon)
3:50 PM	179	KEYNOTE: Experimental and Numerical Characterization of Relaxation in Bolted Composite Joints
		R.F. Gibson, University of Nevada, Reno; S.D. Thoppul, Gulfstream Aerospace Corporation
4:30 PM	79	New Composite Timbers, Full Field Analysis of Adhesive Behavior
		B. Clouet, R. Pommier, M. Danis, University of Bordeaux
4:50 PM	474	Cylindrical Bending of Bonded Layered Thick Composites
		S.A. Nassar, J. Mao, X. Yang, Oakland University; D. Templeton, U.S. Army TARDEC
5:10 PM	42	New Shear Fracture Test for Mode II Fracture Toughness Measurement
		L.R. Xu, University of Texas at El Paso; A. Krishnan, Michigan State University
Session 048   Tomography & Digital Volume Correlation (Tuesday Late Afternoon)
3:50 PM	267	Nanotomography of Polymer Nanocomposite Nanofibers
		S. Bandla, Oklahoma State University: R.P. Winarski, Argonne National Laboratory; J.C. Hanan, Oklahoma State University
4:10 PM	351	Void Growth and Coalescence in Aluminum Alloy
		H. Jin, W.Y. Lu, A. Mota, J. Foulk, Sandia National Laboratories California; G. Johnson, University of California at Berkeley
4:30 PM	225	High Performance Digital Volume Correlation for Experimental Mechanics Applications
		M. Gates, J. Lambros, M. Heath, University of Illinois at Urbana-Champaign
4:50 PM	100	3D Analysis of a Fatigue Crack in Cast Iron Using Digital Volume Correlation of X-ray Tomographic Images
		J. Lachambre, Université de Lyon/INSA de Lyon-MATEIS; A. Weck, University of Ottawa; J. Rethore, Université de Lyon/INSA de Lyon-LaMCoS; J.Y. Buffiere, J. Adrien, Université de Lyon/INSA de Lyon-MATEIS
5:10 PM	251	Feasibility Study of 3D Digital Volume Correlation of Synchrotron Radiation Laminography Data for Displacement Field Measurement During Ductile Crack initiation
		T.F. Morgeneyer, Mines ParisTech; L. Helfen, ANKA/Karlsruhe Institute of Technology; F. Hild, LMT-Cachan
5:30 PM	84	Artifact Correction for DVC Measurements Using A Laboratory X-ray Source
		J. Adrien, J.-Y. Buffiere, MATEIS; F. Hild, LMT-Cachan; N. Limodin, MATEIS; J. Rethore, LaMCoS; S. Roux, LMT-Cachan
Session 049   DIC: Recent Advances (Wednesday Morning)
10:30 AM	83	KEYNOTE: On the Resolution of Local and Global DIC Approaches
		F. Hild, S. Roux, LMT-Cachan
11:10 AM	213	CAD-based Calibration of a 3D DIC System
		B. Beaubier, LMT-Cachan/PSA Peugeot Citroën; K. Lavernhe-Taillard, G. Besnard, LMT-Cachan; S. Lavernhe, LURPA; F. Hild, S. Roux, LMT-Cachan
11:30 AM	38	Impact of Lens Distortions on Strain Measurements Obtained With Digital Image Correlation
		P. Lava, Catholic University College Ghent/K.U. Leuven; W. Van Paepegem, Ghent University; S. Coppieters, Catholic University College Ghent/K.U. Leuven; I. De Baere, Ghent University; D. Debruyne, Catholic University College Ghent/K.U. Leuven
11:50 AM	260	Optimized Patterns for Digital Image Correlation
		S. Bossuyt, Aalto University
12:10 PM	338	Bias Reduction in Displacement Estimation by Linear Digital Image Correlation of Noisy Images
		W. Tong, Y. Xuan, L. Wang, Southern Methodist University
Session 050   Shape Memory Materials (Wednesday Morning)
10:30 AM	503	KEYNOTE: Structural to Multifunctional: Developments in Adaptive and Active Composite and Hybrid Materials
		R.S. Justice, Air Force Research Laboratory
11:10 AM	241	Relaxation and Recovery Behavior of an Epoxy Based Shape Memory Polymer Resin
		A.J.W. McClung, National Research Council/Air Force Research Laboratory; G.P. Tandon, University of Dayton Research Ins./Air Force Research Laboratory; J.W. Baur, Air Force Research Laboratory
11:30 AM	419	Time Dependent Recovery of Shape Memory Polymer Composites with Magnetic Particles
		K. Yu, K.K. Westbrook, P. Kao, H.J. Qi, University of Colorado
11:50 AM	165	Exploiting the Glass Transition for Shape Memory Programming in Polymers
		R. Xiao, T.D. Nguyen, Johns Hopkins Univsersity
Session 051   Multi-Scale Mechanics of Natural Fibers (Wednesday Morning)
10:30 AM	471	KEYNOTE: Optimal Length Scales Emerging from Shear Load Transfer in Natural Materials and Application to Carbon-based Nanocomposite Design
		X. Wei, N. Mohammad, H.D. Espinosa, Northwestern University
11:10 AM	157	KEYNOTE: Untangling a Sticky Problem: the Tensile Properties of Natural Silks
		C. Viney, University of California, Merced
11:50 AM	325	Mechanics of the Hierarchical Structure of Cellulose Nanocrystals
		P.D. Zavattieri, F. Dri, A. Martini, R. Moon, Purdue University
12:10 PM	236	Biomimetic Tapered Fibers for Enhanced Composite Toughness
		D. Zhu, H. Humburg, F. Barthelat, McGill University
Session 052   Size Effects in Metals (Wednesday Morning)
10:30 AM	97	Modeling of Sheet Metals With Coarse Texture via Crystal Plasticity
		B. Klusemann, RWTH Aachen University; A.F. Knorr, H. Vehoff, University of Saarland; B. Svendsen, RWTH Aachen University
10:50 AM	238	Experiments and Modeling of Microcompression of Single-crystal Magnesium
		C.M. Byer, Johns Hopkins University; J. Zhang, S. Joshi, National University of Singapore; K.T. Ramesh, Johns Hopkins University
11:10 AM	297	Evaluation of Mechanical Properties of Nano-Structured Al6061 Synthesized Using Machining
		P. Ghangrekar, H. Murthy, B.C. Rao, Indian Institute of Technology Madras
11:30 AM	432	Direct Measurement of the Interfacial Strength of PMMA-CNT Interface
		X.-M. Chen, M. Zheng, C.-H. Ke, State University of New York at Binghamton
11:50 AM	208	Hardening Behaviour of Thin Wires Under Loading With Strain Gradients
		Y. Chen, M. Walter, O. Kraft, Karlsruhe Institute of Technology
12:10 PM	377	Buckling Induced Silicon Nanowire Coils on Elastomeric Substrates
		F.X. Xu, Y. Zhu, North Carolina State University
Session 053   Shock/Blast Loading of Materials II (Wednesday Morning)
10:30 AM	200	Operational Equations of State for Modeling High-rate Phenomena
		M.A. Grinfeld, U.S. Army Research Laboratory
10:50 AM	212	Influence of Loading Kinetics on the Shock Response of Polycrystalline Copper
		J.P. Escobedo, C.P. Trujillo, D. Dennis-Koller, E.K. Cerreta, C.A. Bronkhorst, Los Alamos National Laboratory
11:10 AM	201	Experimental Characterization and Modeling of the 2024-T3 Aluminum Alloy Under Close-in Blast Loading
		J. Yu, C.F. Yen, U.S. Army Research Laboratory; C. Chen, U.S. Department of Homeland Security; M. Nansteel, Battelle Memorial Institute
11:30 AM	171	Interaction Between Oxygen and Carbon Dioxide at High Pressure and Temperature
		H. Liu, Y. Zhao, G. Lu, Institute of Applied Physics and Computational Mathematics
11:50 AM	198	Response of Curved Carbon Composite Panels to Shock Loading
		P. Kumar, University of Rhode Island; D.S. Stargel, Air Force Office of Scientific Research; A. Shukla, University of Rhode Island
Session 054   Dynamic Behavior of Brittle Materials (Wednesday Morning)
10:30 AM	17	Perforation of Aluminum Plates with 7.62 APM2 Bullets
		M.J. Forrestal, Forrestal Consulting; T.L. Warren, Warren Consulting; T. Borvik, Norwegian University of Science and Technology
10:50 AM	309	Failure Mechanisms in Aluminum Nitride Under Confined Dynamic Loading
		G. Hu, C.Q. Chen, Johns Hopkins University; C. Williams, Johns Hopkins University/Army Research Laboratory; K.T. Ramesh, Johns Hopkins University; J.W. McCauley, Army Research Laboratory
11:10 AM	326	A Priori Pulse Shaper Design for Constant-strain-rate Tests of Elastic-brittle Materials.
		J.T. Foster, The University of Texas at San; E.E. Nishida, Sandia National Laboratories
11:30 AM	306	Early Stage Damage Propagation in Hypervelocity Impacts on Brittle Materials
		J. Kimberley, K.T. Ramesh, Johns Hopkins University
11:50 AM	138	Time Correlation Between Acoustic, Electromagnetic and Neutron Emissions in Rocks Under Compression
		A. Carpinteri, G. Lacidogna, A. Manuello, Politecnico di Torino; G. Niccolini, INRIM - National Research Institute of Metrology; O. Borla, Politecnico di Torino
Session 055   Composite Joints in Aerospace Related Applications (Wednesday Morning)
10:30 AM	371	KEYNOTE: Composite Joint Research at the National Research Council Canada
		A.A. Johnston, National Research Council Canada
11:10 AM	234	The Effect of Riveting on the Fatigue Life of Fiber Metal Laminate Zero Load Transfer Joints
		D. Backman, National Research Council Canada; E.A Patterson, University of Liverpool
11:30 AM	56	Atmospheric Plasma Treatment of Fiber-reinforced Composites for Adhesive Bonding
		R.J. Zaldivar, J.P Nokes, H.I. Kim, B.A. Morgan, G.L. Steckel, The Aerospace Corporation
11:50 AM	478	Evaluation of Surface Preparation Techniques for Composite Bonded Joints
		B.D. Joseph, The Spaceship Company
12:10 PM	109	A Novel Method to Attach Membranes Uniformly on MAV wings
		Y.J. Abudaram, S. Rohde, J.P. Hubner, P.G. Ifju, University of Florida
Session 056   Hybrid Imaging Techniques (Wednesday Morning)
10:30 AM	444	Characterization of Compressive Properties of Polymer Foam Materials Using DIC and a Modified Arcan Fixture
		S.T. Taher, O.T. Thomsen, Aalborg University; J.M. Dulieu-Barton, University of Southampton
10:50 AM	166	The Effect of Texture on Superelasticity in Nickel-titanium
		K.B. Kim, S. Daly, University of Michigan
11:10 AM	60	Application of Full-field Measurements to Analyze the Thermo-mechanical Response of a Three-branch Rubber Specimen
		E. Toussaint, Pascal Institute/Blaise Pascal University; X. Balandraud, Pascal Institute/French Institute for Advanced Mechanics; J.-B. Le Cam, Larmaur/Rennes University; M. Grediac, Pascal Institute/Blaise Pascal University
11:30 AM	231	Intermittent Twin Region Nucleation Measurement Using Acoustic Emission
		G. Murasawa, R. Takahashi, S. Orikasa, Yamagata University
11:50 AM	480	Microlithography Technique Advantages, Limits and its Coupling With EBSD Measurements
		J. Marteau, Université de Technologie de Compičgne (UTC); H. Haddadi, LPMTM-CNRS, UPR9001; S. Bouvier, Université de Technologie de Compičgne (UTC)
12:10 PM	365	Thermal Analysis of PZT Thin Films Using Digital Image Correlation
		B.J. Meuris, T.A. Berfield, University of Louisville
Session 057   DIC-Uncertainty Quantification (Wednesday Early Afternoon)
2:30 PM	229	Uncertainty Assessment in DIC: A Practical Approach
		T.E. Schmidt, Trilion Quality Systems
2:50 PM	63	Uncertainty Assessment of DIC Under Heterogeneous Strain States
		Y. Wang, Katholieke Universiteit Leuven; P. Lava, Catholic University College Ghent/K.U. Leuven; P. Van Houtte, Katholieke Universiteit Leuven; D. Debruyne, Catholic University College Ghent/K.U. Leuven
3:10 PM	107	An Approach to Strain Measurement Uncertainty for DIC Using the SPOTS Calibration Procedure
		Th. Siebert, Dantec Dynamics GmbH; M.J. Crompton, Dantec Dynamics Inc.
3:30 PM	266	Uncertainty Quantification for 3D Digital Image Correlation
		P.L. Reu, Sandia National Laboratory
Session 058   Time-Dependent Nanoscale Testing (Wednesday Early Afternoon)
2:30 PM	330	Characteristic Length Scale Investigation on the Nanoscale Deformation of Copper
		J.D. Gale, A. Achuthan, Clarkson University
2:50 PM	221	Novel Experiments for Large Deformation of Individual Nanoscale Fibers
		P.V. Kolluru, I. Chasiotis, University of Illinois at Urbana-Champaign
3:10 PM	150	Rate-Dependent, Large-Displacement Deformation of Vertically Aligned Carbon Nanotube Arrays
		Y.C. Lu, J. Joseph, University of Kentucky; M. Maschmann, Air Force Research Laboratory/Universal Technology Corporation; L. Dai, Case Western Reserve University; J. Baur, Air Force Research Laboratory
Session 059   Indentation Methods in Soft Materials (Wednesday Early Afternoon)
2:30 PM	288	Improved Instrumented Indentation of Soft Materials through Surface Deformation Measurements
		M.J. Wald, University of Pennsylvania; J.M. Considine, U.S. Forest Service; K.T. Turner, University of Pennsylvania
2:50 PM	69	Micron-scale Measurement of the Complex Modulus of gel by Dynamic Indentation
		J.L. Hay, Agilent Technologies
3:10 PM	499	The Surface Tribological and Mechanical Behaviors of Silicone-based Hydrogel Materials
		B. Zhou, CSM Instruments Inc.; L. Li, University of Pittsburgh; N. Randall, CSM Instruments
3:30 PM	500	Advanced Nanoindentation of Biomaterials
		B. Zhou, N. Randall, CSM Instruments Inc.
Session 060   Optical Methods (Wednesday Early Afternoon)
2:30 PM	483	Mapping the Histology of the Human Tympanic Membrane by Spatial Domain Optical Coherence Tomography
		C.S. Rutledge, M. Thyden, C. Furlong, Worcester Polytechnic Institute; J.J. Rosowski, J.T. Cheng, Massachusetts Eye and Ear Infirmary
2:50 PM	501	Opto-mechanical Characterization of a MEMS Sensor for Real-time Infrared Imaging
		E. Tripp, Worcester Polytechnic Institute; F. Pantuso, L. Zhang, Agiltron Incorporated; E. Harrington, C. Furlong, Worcester Polytechnic Institute
3:10 PM	405	Enriched Digital Image Correlation to Characterize Geometrically Non-ideal Microbeams
		J.P.M. Hoefnagels, L.I.J.C. Bergers, N. Neggers, M.G.D. Geers, Eindhoven University of Technology
3:30 PM	398	Global Digital Image Correlation for Pressure Deflected Membranes
		J. Neggers, J.P.M. Hoefnagels, Eindhoven University of Technology; F. Hild, S. Roux, LMT-Cachan; M.G.D. Geers, Eindhoven University of Technology
Session 062   Material Applications (Wednesday Early Afternoon)
2:30 PM	102	Measurement of Metallic Adhesion Force-to-Elongation Profile Under High Separation-Rate Conditions
		D. Bortoluzzi, M. Benedetti, C. Zanoni, University of Trento; J.W. Conklin, University of Stanford
2:50 PM	332	In Situ Dynamics of Electronics Assemblies Under Shock
		J.R. Foley, K.J. Williamson, J.A. Caulk, Air Force Research Laboratory; A.L. Beliveau, Applied Research Associates, Inc.
3:10 PM	224	Prediction of Constraint Parameters Along the 3D Crack Front Under Negative Biaxial Loadings
		K. Ragupathy, K. Ramesh, Indian Institute of Technology Madras
3:30 PM	140	Stress intensity factors for viscoelastic axisymmetric problems applied to wood
		R. Moutou Pitti, Universite Blaise Pascal, CNRS, CENAREST; C. Chazal, Universite de Limoges; F. Labesse-Jied, Universite Blaise Pascal, CNRS; Y. Lapusta, IFMA, CNRS
Session 063   Fatigue & Fracture of Composite Joints (Wednesday Early Afternoon)
2:30 PM	511	Comparison of FE and DIC Measurements of a Pi-joint Using Feature Vectors
		C Sebastian, University of Liverpool; M. Haq, A. Conway, Michigan State University; E. Patterson, University of Liverpool
2:50 PM	178	A Study on Damage-induced Behavior of Bonded PI-/T-joints Using Digital Image Correlation (DIC) and FE Modeling
		M. Haq, A. Conway, Michigan State University; E.A. Patterson, University of Liverpool
3:10 PM	475	A Model for Fracture Characterization of Adhesively-Bonded Joints
		J. Mao, S.A. Nassar, X. Yang, Oakland University
3:30 PM	24	Delamination Toughness Tests of DCB Specimens Composed of Woven Composites
		L. Banks-Sills, C. Ishbir, V. Fourman, R. Eliasi, Tel Aviv University
Session 064   Optical Measurement Systems Using Polarized Light I (Wednesday Early Afternoon)
2:30 PM	344	KEYNOTE: Nano-structure Inspection by Dual-rotating Mueller Matrix Spectro-polarimeter
		Y. Otani, CORE, Utsunomiya University; Y. Mizutani, The University of Tokushima
3:10 PM	50	Using Stokes Polarimeter for Linear Birefringence and Dichroism in Ferrofluid
		J.F. Lin, M.Z. Lee, Far East University
3:30 PM	240	Simultaneous Observation of Phase-Stepped Photoelastic Images Using Diffraction Gratings
		S.L.B. Kramer, B.A. Beiermann, S.R. White, N.R. Sottos, University of Illinois at Urbana-Champaign
3:50 PM	172	Extracting Cell Gap, Twisted and Pretilt Angles of TNLC Cells by Effective Parameters using Stokes Polarimetry
		Y.L. Lo, T.T. Yang, H. Yang, National Cheng Kung University
Session 065   DIC-Applications (Wednesday Late Afternoon)
4:20 PM	318	In Situ Strain Measurement in Anodes in Lithium-ion Batteries
		E. Jones, N.R. Sottos, S.R. White, University of Illinois
4:40 PM	350	Investigating High Strain Rate Behaviour of Foams Using Digital Image Correlation
		D.A. Crump, J.M. Dulieu-Barton, University of Southampton
5:00 PM	285	Fabrication and Analysis of Small Flapping Wings
		J Rue, K. Chang, P.G. Ifju, R. Haftka, T. Schmitz, C. Tyler, V. Ganguly, A. Chaudhuri, University of Florida
5:20 PM	220	Investigating the Aerodynamic Effects of Flexible Membrane Wings
		B. LaCroix, C.J. Gardiner, P.G. Ifju, University of Florida
5:40 PM	479	Tree Biomechanics Measurements Using 3D Photogrammetry
		T. Schmidt, Trilion Quality Systems; M. Melis, NASA Glenn Research Center; M. Hoenigman, Busy Bee Services and The TREE Fund; W. Peterson, Davey Tree; J. Goodfellow, Biocompliance Consulting, D. Revilock, C. Ruggeri, NASA Glenn Research Center
6:00 PM	119	Thickness Effects on the Thermal Expansion Coefficient of ITO/PET Film
		J.Y. Lin, F.I. Su, C.H. Chien, T.H. Su, W.T. Lin, Y.D. Jhuang, J.W. Che, J.J. Li, National Sun Yat-Sen University
Session 066   Modeling & Measurement of Activated Materials (Wednesday Late Afternoon)
4:20 PM	420	Mechanics and Applications of Light-Activated Polymers
		M. D'Amato, J. Ryu, X. Cui, University of Colorado; K. Long, Sandia National Laboratories; M. Dunn, H.J. Qi, University of Colorado
4:40 PM	104	Role of Viscoelasticity in Predicting the Shape Memory Effect of Polymers
		J. Diani, P. Gilormini, C. Fredy, CNRS, Arts et Metiers ParisTech; I. Rousseau, General Motors Company
5:00 PM	199	Damage Assessment in Syracuse Limestone Specimens by Frequency Analysis of Elastic Emissions
		A. Schiavi, G. Niccolini, INRIM - National Institute of Metrological Research; G. Lacidogna, A. Carpinteri, Politecnico di Torino
5:20 PM	223	Effect of Loading Rate on Tensile Properties of Three Steels
		J.G. Qin, F.Y. Lu, Y.L. Lin, X.Y. Li, X.J. Wen, College of Science, National University of Defense Technology
Session 067   Imaging Methods in Biological Systems & Materials (Wednesday Late Afternoon)
4:20 PM	406	Full-field Inflation Experiments of Soft Fibrous Tissues
		T.D. Nguyen, Johns Hopkins University
4:40 PM	105	Assessment of Corneal Deformation Using Optical Coherence Tomography and Digital Volume Correlation
		J. Fu, Arts et Metiers ParisTech; M. Haghighi-Abayneh, Loughborough University; F. Pierron, Arts et Metiers ParisTech; P.D. Ruiz, Loughborough University
5:00 PM	209	The Effects of Noise and Spatial Sampling on Identification of Material Parameters by Magnetic Resonance Elastography
		N. Connesson, University of Grenoble; E.H. Clayton, P.V. Bayly, Washington University in St Louis; F. Pierron, Arts et Métiers ParisTech
5:20 PM	481	Tracking Cortical Surface Deformation Using Stereovision
		S. Ji, X. Fan, Dartmouth College; D.W. Roberts, Dartmouth Hitchcock Medical Center/Norris Cotton Cancer Center; A. Hartov, Dartmouth College; K.D. Paulsen, Dartmouth College/Norris Cotton Cancer Center
Session 068   Structural Testing (Wednesday Late Afternoon)
4:20 PM	443	Photogrammetry Measurements During a Tanking Test on the Space Shuttle External Tank, ET-137
		J. Littell, ATK Space Systems; T. Schmidt, J. Tyson, Trilion Quality Systems; S. Oliver, NASA Marshall Space Flight Center; M. Melis, C. Ruggeri, D. Revilock, NASA Glenn Research Center
4:40 PM	130	Experimental, Numerical and Analytical Evaluation of Structural Integrity of Experiment Container Subjected to Reduced Gravity Flight Testing
		M. Umar, M.G. Jenkins, California State University, Fresno; T.L. Nguyen, Levitas Consultants
5:00 PM	300	Use of Fiber Bragg Grating Strain Gages on a Pipeline Specimen Repaired With a CFRE Composite System
		J.L.F Freire, Pontifical Catholic University of Rio de Janeiro; V.A. Perrut, CENPES-PETROBRAS; A.M.B. Braga, R.D. Vieira, A.S.A. Ribeiro, Pontifical Catholic University of Rio de Janeiro; M.A. Perez Rosa, Prima-7S
5:20 PM	10	Microstructure in the FSW Butt Joint of Aluminum Alloy AA5083
		T.P. Chen, Fortune Institute of Technology; W.B. Lin, Chinese Military Academy; C.M. Hung, Yung-Ta Institute of Technology and Commerce
5:40 PM	195	Load History Dependency of Plastic Collapse Behavior of Cracked Piping
		R. Suzuki, M. Matsubara, M. Suzuki, T. Shiraishi, S. Yanagihara, K Sakamoto, Gunma University; S. Izawa, Oyama National College Of Technology
6:00 PM	99	Production of Metal Matrix Composites Using Thixinfiltration Techniques
		M.H. Robert, L.M.P. Ferreira, A.F. Jorge, University of Campinas; E. Bayraktar, SUPMECA-LISMMA-Paris
Session 069   Shock/Blast Loading of Materials III (Wednesday Late Afternoon)
4:20 PM	271	Fluid Structure Interaction During Shock Loading in a Compressible Fluid
		E. Wang, University of Illinois at Urbana-Champaign; J. Wright, A. Shukla, University of Rhode Island
4:40 PM	112	Moderate Velocity Ball Impact of a Mock High-explosive
		J. Furmanski, P. Rae, B. Clements, Los Alamos National Laboratory
5:00 PM	359	Ultra-high-speed Imaging for Explosive-driven Shocks in Transparent Media
		M.J. Murphy, S.A. Clarke, Los Alamos National Laboratory
Session 070   Materials Response III (Wednesday Late Afternoon)
4:20 PM	286	Utilizing Knots to Reduce Dynamic Loads in Fire Service Rope Systems
		K. Boron, University of Illinois at Urbana-Champaign; M. Obstalecki, University of Illinois at Urbana-Champaign/Cornell University; P. Kurath, G.P. Horn, University of Illinois at Urbana-Champaign
4:40 PM	237	Tensile Behavior of Single PPTA Fibers Measured by the Kolsky bar Using the Direct Fiber Clamping Methodą
		J.H. Kim, N.A. Heckert, S.D. Leigh, H. Kobayashi, W.G. McDonough, R.L. Rhorer, K.D. Rice, G.A. Holmes, National Institute of Standards and Technology
5:00 PM	258	Effect of Strain Rate and Pre-Twist on Strength of Single Kevlar® KM2 Fiber
		B.D. Sanborn, C.A. Gunnarsson, P. Moy, J.Q. Zheng, T. Weerasooriya, U.S. Army Research Laboratory
5:20 PM	13	Effect of Low Temperatures on the Ballistic Limit of Hybrid Woven Composites
		Y. Budhoo, Vaughn College of Aeronautics and Technology; F. Delale, B. Liaw, City College of New York
5:40 PM	39	Role of Pressure and Strain Rate on Structural Amorphization in Boron Carbide
		G. Subhash, University of Florida
6:00 PM	389	High-Loading-rate Energy Capture in Nanoenvironment
		W. Lu, T. Kim, UCSD
6:20 PM	91	Dynamics of Multilayered Structures of VACNTs with Metallic Inter-layers
		R. Thevamaran, C. Daraio, California Institute of Technology
Session 071   Composite Characterization Using Digital Image Correlation Techniques (Wednesday Late Afternoon)
4:20 PM	23	Probabilistic Characterization of Elastic Properties of Composites Using Digital Image Correlation Technique
		M.R. Gurvich, P.L. Clavette, United Technologies Research Center,
4:40 PM	373	Mechanics of Fiber-reinforced Porous Polymer Composites
		S. Haldar, H.A. Bruck, University of Maryland, College Park
5:00 PM	226	Study of Damage Evolution During Fatigue of Composites Using DIC
		S.M. Khaja Mohiddin, S.J. Subramanian, H. Murthy, Indian Institute of Technology Madras
5:20 PM	4	Experimental Study of Shear Behavior of Kevlar 49 Fabric
		D. Zhu, Hunan University; B. Mobasher, S.D. Rajan, Arizona State University
5:40 PM	374	Mechanics of Multifunctional Skin Structures
		H.A. Bruck, K. Cellon, S.K. Gupta, M. Kujawski, A. Perez-Rosado, E. Smela, M. Yu, University of Maryland, College Park
6:00 PM	52	Use of Vision-based Methods for Measurement of Mechanical Properties of Exhaust Catalysts
		A.P. Dickinson, P.J. Gloeckner, R.J. Stafford, Cummins Inc.; K.B. Golovin, Cornell University
Session 072   Optical Measurement Systems Using Polarized Light II (Wednesday Late Afternoon)
4:20 PM	261	Photoelastic Testing and FE Analysis of T-Stub Model
		D. Carazo Álvarez, University of Jaen; M. Haq, Michigan State University; J.D. Carazo Álvarez, University of Jaen; E.A. Patterson, University of Liverpool
4:40 PM	362	An Instantaneous Phase Shifting Digital Shearography System for Dynamic Measurement
		T. Y.-F. Chen, Y. C. chen, National Cheng Kung University
5:00 PM	110	Dynamic Measurements With a Luminescent Photoelastic Coating
		M.L. Conway, H. Ali, J.P. Hubner, The University of Alabama
5:20 PM	203	Measurement of Low Level Stress by Integrating Photoelasticity and Spectrometry
		W.C. Wang, National Tsing Hua University; C.H Hwang, National Applied Research Laboratories; Y.C. Tseng, P.C. Sung, National Tsing Hua University
5:40 PM	33	Instantaneous Phase-stepping Photoelasticity and Hybrid Stress Analysis for a Curving Crack Under Thermal Load
		S. Yoneyama, Aoyama Gakuin University; K. Sakaue, Shibaura Institute of Technology
6:00 PM	466	ESPI Photoelastic Measurement of All In-Plane Stress Components
		S. Gao, G.S. Schajer, University of British Columbia
Session 073   Novel Optical Techniques I (Thursday Morning)
10:30 AM	8	Study of Crack Problems by the Optical Method of Caustics
		E.E. Gdoutos, Democritus University of Thrace
10:50 AM	335	Shock Wave Interaction With Periodic Obstacles
		Y.S. Song, J.B. Isaacs, R. Griswold, A. Srivastava, A.V. Amirkhizi, S. Nemat-Nasser, University of California, San Diego
11:10 AM	173	Finite Element Model Generation Based on Stochastic Analysis on AFM Images
		M. Allahkarami, J.C Hanan, Oklahoma State University
11:30 AM	131	Simultaneous Measurement of Plate Natural Frequencies and Vibration Mode Shapes Using ESPI
		P. Georgas, G.S. Schajer, University of British Columbia
11:50 AM	59	Applying the Grid Method to Investigate the Mechanical Behavior of Asphalt
		M. Grediac, E. Toussaint, Pascal Institute/Blaise Pascal University
12:10 PM	557	Robust Rotation-unwrapping Algorithm for Problems of Holes and Noise
		J.-F. Weng, Y.L. Lo, National Cheng Kung University
Session 074   Time-Dependent & Small-Scale Effects in Biocomposites (Thursday Morning)
10:30 AM	34	Characterization and Analysis of Time Dependent Behavior of Bio-based Composites Made out of Highly Non-Linear Constituents
		L. Rozite, Luleĺ University of Technology; R. Joffe, Luleĺ Luleĺ University of Technology/Swerea SICOMP; J. Varna, Luleĺ University of Technology; B. Nyström, Swerea SICOMP
10:50 AM	464	Combined Effects of Moisture and UV Radiation on the Mechanics of Carbon Fiber Reinforced Vinylester Composites
		C.S. Korach, H.T. Liao, D. Wu, P. Feka, F.P. Chiang, Stony Brook University
11:10 AM	74	Long Term Life Prediction of CFRP Laminates Under Wet Condition
		M. Nakada, Y. Miyano, Kanazawa Institute of Technology
11:30 AM	128	Nonlinear Behavior of Natural Fiber/bio-based Matrix Composites
		R. Joffe, L. Rozite, A. Pupurs, Lulea University of Technology
11:50 AM	184	A Pressure-dependent Nonlinear Viscoelastic Schapery Model for POM
		D. Tscharnuter, S. Gastl, Polymer Competence Center Leoben GmbH; G. Pinter, University of Leoben
Session 075   Mechanics of Tissue Damage (Thursday Morning)
10:30 AM	87	Development of a Quantitative Mechanical Test of Atherosclerotic Plaque Stability
		Y. Wang, S.M. Lessner, M.A. Sutton, University of South Carolina; J.F. Ning, John Hopkins University; J.A. Johnson, University of South Carolina
10:50 AM	85	Blast Overpressure Effects on Bio-mechanical Systems
		C. Maloney, G. Urgessa, George Mason University
11:10 AM	12	Effect of Stress Relief Process on Mechanical Performance of MP35N Cable as Lead Conductor in Medical Device
		B. Li, H. Zhang, L. Wang, Medtronic Inc
11:30 AM	146	The Time Dependent Mechanical Properties of Bovine Enamel
		M.-C. Chuang, G.-W. Ruan, N.-S. Liou, Southern Taiwan University; Y.-R. Jeng, National Chung Cheng University
Session 076   Reliability, Residual Stress & Tribology (Thursday Morning)
10:30 AM	94	Design and Development of Internal Friction and Energy Loss Measurement on Nanocrystalline Aluminum Thin Films
		T.C. Hu, F.C. Hsu, M.T. Lin, C.J. Tong, Y.T. Wang, National Chung Hsing University
10:50 AM	510	Quantifying Size Effects in Polysilicon Using an In-situ On-chip Test Platform
		M.E. Saleh, S.S. Hazra, J.L. Beuth, M.P. de Boer, Carnegie Mellon University
11:10 AM	252	Detection of Damage of Epoxy Composites Using Carbon Nanotube Network
		S. Cardoso, C. Mooney, R. Pivonka, V.B. Chalivendra, University of Massachusetts Dartmouth; A. Shukla, S.Z. Yang, University of Rhode Island
11:30 AM	340	Development and Control of Residual Stresses in Buried Cavities for MEMS Applications
		G.P. Horn, T.-W. Lin, University of Illinois; J. Makinen, M. Palokangas, Okmetic Oyj; H.T Johnson, University of Illinois
11:50 AM	283	Characterizing the Wear of Diamond-like-carbon Atomic Force Microscope Probes
		J. Liu, D.S. Grierson, K. Sridharan, University of Wisconsin-Madison; R.W. Carpick, University of Pennsylvania; K.T. Turner, University of Wisconsin-Madison/University of Pennsylvania
Session 077   Dynamic Behavior of Geo-Materials: Grain-Scale Mechanics (Thursday Morning)
10:30 AM	255	Dynamic Contact Mechanics of Geologic Materials: Experiments, Modeling and Applications
		D.M. Cole, M.A. Hopkins, ERDC-CRREL; S.W. Broadfoot, S.D. Sloan, ERDC-GSL
10:50 AM	248	Dynamic Elasto-plastic Contact Behavior of Dimer Granular Pairs
		E. Wang, T. On, J. Lambros, University of Illinois at Urbana-Champaign
11:10 AM	80	Topology Optimization in Two-dimensional Highly Nonlinear Granular Crystals With Spherical Intruders
		I. Szelengowicz, California Institute of Technology; M. Silva, D. Tortorelli, University of Illinois at Urbana-Champaign; C. Daraio, California Institute of Technology
11:30 AM	51	Experimental Testing of Micro-particles Collision
		W.H. Lin, C. Daraio, California Institute of Technology
11:50 AM	72	Stress Wave Propagation in Highly Nonlinear Two-dimensional Granular Crystals
		A. Leonard, C. Daraio, California Institute of Technology
Session 078   Composites II (Thursday Morning)
10:30 AM	162	Low Velocity Impact Behaviour of the Epoxy Matrix Composites reinforced with Metallic and Oxide Particles
		E. Bayraktar, D. Katundi, Supmeca-LISMMA-Paris; A. Guinault, CNAM-Arts et Métiers/Paris; A. Kosecki, A. Larbi, Supmeca-LISMMA-Paris
10:50 AM	155	Experimental Study on Dynamic Mechanical Properties of a Mock PBX
		J.G. Qin, Y.L. Lin, F.Y. Lu, College of Science, National University of Defense Technology; Z.B. Zhou, Beijing Institute of Technology; R. Chen, College of Science, National University of Defense Technology
11:10 AM	264	Dynamic Fracture Toughness Test Using Hopkinson Bar
		W.-Y. Lu, B. Song, K. Gwinn, Sandia National Laboratories
11:30 AM	21	Damage Assessments of Ballistic Impact Behaviors of GLARE 5 (3/2) Beams with Various Stacking Sequences
		A. Seyed Yaghoubi, B. Liaw, The City College of New York
11:50 AM	205	Effect of Filler Particle Shape on Dynamic Fracture Behavior of Glass-filled Epoxy
		V. Kushvaha, H.V. Tippur, Auburn University, Tippur
Session 079   Multi-Scale Simulation & Testing of Composites (Thursday Morning)
10:30 AM	53	Non-local Damage-enhanced MFH for Multiscale Simulations of Composites
		L. Wu, Universite de Liege/Northwestern Polytechnical University; L. Noels, Universite de Liege; L. Adam, e-Xstream Engineering; I. Doghri, e-Xstream Engineering/Université Catholique de Louvain
10:50 AM	70	Composite Damage Detection With Self-Sensing Fibers and Thermal Sprayed Electrodes
		T. Nakamura, M. Ogawa, State University of New YorK at Stony Brook
11:10 AM	118	Experimental Investigation of Fatigue Behavior of Carbon Fiber Composites Using Fully Reversed Four Point Bending Test
		A. Amiri, M.N. Cavalli, University of North Dakota
11:30 AM	188	Design & Development of Ring Shaped Force Transducers
		H. Kumar, CSIR-National Physical Laboartory; S. Kumar, Krishna Engineering College
11:50 AM	282	Novel High Resolution Sensor Concept
		G.A. Arzoumanidis, Psylotech, Inc.
Session 080   Residual Stress Applications (Thursday Morning)
10:30 AM	152	Review of Methods for Determining Residual Stresses in Biological Materials
		D.V. Nelson, Stanford University
10:50 AM	462	Residual Stress Generated by a Wire Electronic Dishcharge Machine cut
		W. Gubbels, M. Steinzig, Los Alamos National Laboratory
11:10 AM	268	A Comparison of Residual Stress Measurements on Linear Friction Welds Using the Contour Method and Neutron Diffraction
		A.T. DeWald, Hill Engineering, LLC.; D. Legzdina, Honeywell Aerospace; B. Clausen, B.W. Brown, T.A. Sisneros, Los Alamos National Laboratory; M.R. Hill, University of California, Davis
11:30 AM	153	Experimental Study of High Speed Ball End milling of Titanium Alloy (Ti-6Al-4V)
		M.H. Baccar, E. Bayraktar, Supmeca-LISMMA-Paris; T. Rickert, American Stress Technologies, Inc.; M. Boujelbene, D. Katundi, Supmeca-LISMMA-Paris
11:50 AM	46	Very High-cycle Fatigue Resistance of Shot Peened High-strength Aluminum Alloys
		M. Benedetti, V. Fontanari, University of Trento; M. Bandini, Peen Service
Session 081   Novel Optical Techniques II (Thursday Early Afternoon)
1:20 PM	333	Laser Generation and Double-exposure Imaging of Hypervelocity Micro-projectiles
		J.-H. Lee, D. Veysset, M. Retsch, G. Saini, J.P. Singer, K.A. Nelson, E.L. Thomas, MIT
1:40 PM	298	Impulse Plug Measurements of Blast Reflected Impulse at Close Range
		M.W. Nansteel, Battelle Memorial Institute; R.L. Veldman, Hope College; C.C. Chen, U.S. Department of Homeland Security; W. Lawrence, Battelle Memorial Institute
2:00 PM	49	Measurement of Contact Velocity
		D. Goldar, Sharda University
2:20 PM	490	Design of a Shearography-based Defect Detection System for Structural Health Monitoring
		I.T. Dobrev, C. Furlong, Worcester Polytechnic Institute; M. Flores, de Investigaciones en Optica A.C.; P. Hefti, E.J. Harrington, Worcester Polytechnic Institute
Session 082   Viscoelastoplasticity & Damage (Thursday Early Afternoon)
1:20 PM	457	Determination of Local Creep Properties in Weldments
		Y. Sakanashi, S. Gungor, P.J. Bouchard, The Open University
1:40 PM	265	Viscoelastic Creep Compliance Using Prony Series and Spectrum Function Approach
		J. Simsiriwong, R.W. Sullivan, Mississippi State University; H.H. Hilton, University of Illinois at Urbana-Champaign
2:00 PM	381	The Application of the Combined Creep and Rate-independent Plasticity Model to Turbine Components Life Prediction
		A. Staroselsky, Pratt & Whitney Co.; B.N. Cassenti, University of Connecticut
2:20 PM	189	Temperature- and rate-dependent Failure in Dynamically Loaded Viscoplastic Materials
		P. Longere, Université de Toulouse; A.G. Geffroy, B. Leble, DCNS NA Ingenierie; A. Dragon, CNRS-Institut Pprime (UPR 3346)
Session 083   Mechanics of Soft Materials & Tissues (Thursday Early Afternoon)
1:20 PM	410	Mechanical Characterization of Polyethylene Dlycol Diacrylate (PEGDA) for Tissue Engineering Applications
		O. Yasar, A. Orock, S. Tarantini, J. White, M. Khandaker, University of Central Oklahoma
1:40 PM	277	Developing a Microloading Platform for Applications in Mechanotransduction Research
		K.S. Shah, S.L. York, University of Akron; P. Sethu, University of Louisville; M.M Saunders, University of Akron
2:00 PM	290	Direct Measurements of the Cohesive Behavior of Soft Biological Interfaces
		A. Khayer Dastjerdi, M. Pagano, M.T. Kaartinen, M.D. McKee, F. Barthelat, McGill University
2:20 PM	322	Experiments on Hydrogels of Varying Shape
		W.C. Crone, S. Chindhy, J. Springmann, C. Benjamin, University of Wisconsin-Madison
Session 084   Inverse Problems/Hybrid Methods (Thursday Early Afternoon)
1:20 PM	259	Modified Constitutive Relation Error Strategy for Elastic Properties Identification
		M. Ben Azzouna, P. Feissel, P. Villon, University of Technology of Compiegne
1:40 PM	349	Identification of the Anisotropic Plastic Behaviour of Sheet Metals at Large Strains
		M. Rossi, Arts et Métiers ParisTech/Universitŕ Politecnica delle Marche; F. Pierron, Arts et Métiers ParisTech; M. Stamborska, F. Simcak, Technical University of Kosice
2:00 PM	185	Cohesive Zone Law Extraction From an Experimental Peel Test
		C. Kovalchick, S. Xia, G. Ravichandran, California Institute of Technology
2:20 PM	235	Application of a New Experimental Method to Determine Bi-material Interface Bonding Strength
		M.A.K. Chowdhuri, Z. Xia, University of Alberta, Canada
Session 085   Dynamic Behavior of Geo-Materials: Ensemble Mechanics (Thursday Early Afternoon)
1:20 PM	250	An Experimental Study on the Wave Propagation Behavior in a 2-D Granular Medium
		E. Wang, T. On, R. Waymel, A. Awasthi, P.H. Geubelle, J. Lambros, University of Illinois at Urbana-Champaign
1:40 PM	11	Effect of Particle Size on the Compressive Behavior of Dry Sand Under Confinement at High Strain Rates
		H. Lu, H. Luo, University of Texas at Dallas; W.L. Cooper, Air Force Research Laboratory; R. Komanduri, Oklahoma State University
2:00 PM	496	A Testing Technique to Characterise the Shear Behaviour of Concrete at High Strain-rates
		P. Forquin, L. Sallier, Universite Paul Verlaine - Metz
Session 086   Dynamic Fracture & Failure (Thursday Early Afternoon)
1:20 PM	40	A Fresh look at why Does Spinel Outperforms Sapphire During Ballistic Tests?
		E.J. Haney, G. Subhash, University of Florida
1:40 PM	472	Is Adiabatic Shear Failure Really Adiabatic?
		D. Rittel, S. Osovski, Technion; A. Venkert, P. Landau, NRCN
2:00 PM	207	Is Nano Always Better? Static and Dynamic Fracture Study of Particulate Polymer Composites
		K.C. Jajam, H.V. Tippur, Auburn University
2:20 PM	439	A new Approach to Determine the Quasi-static and Dynamic Fracture Toughness of Engineering Materials
		Jy-An Wang, Oak Ridge National Laboratory; A. Kidane, University of South Carolina
Session 087   Nano-Composites for Improved Composite Performance (Thursday Early Afternoon)
1:20 PM	269	Processing and Characterization of Graphene Reinforced Silicon Carbide Nanocomposites
		A. Rahman, A. Singh, S.P. Harimkar, R.P. Singh, Oklahoma State University
1:40 PM	414	Processing, Microstructure, and Properties of Carbon Nanotube Reinforced Silicon Carbide
		T.A. Carlson, C.P. Marsh, U.S. Army Corps of Engineers; W.M. Kriven, University of Illinois at Urbana-Champaign; C.R. Welch, P.B. Stynoski, U.S. Army Corps of Engineers
2:00 PM	304	HP/HT Hot-wet Resistance of Thermoplastic PEEK and its Composites
		Y.S. Yuan, J.E. Goodson, R.H. Fan, Baker Hughes Incorporated
2:20 PM	270	Reinforcement Of Epoxy Resins With POSS For Enhancing Fracture Toughness At Cryogenic Temperature
		K. Mishra, R.P. Singh, Oklahoma State University
Session 088   Non-Destructive Techniques for Residual Stress Measurement (Thursday Early Afternoon)
1:20 PM	460	Calibration of Barkhausen Noise for Residual Stress Measurement
		C. Casavola, C. Pappalettere, F. Tursi, Politecnico di Bari
1:40 PM	96	Film Residual Stress Assessment Method via Temporarily Thermal Relaxation
		X.X. Cheng, C.W. Wu, Institute of Mechanics, Chinese Academy of Sciences
2:00 PM	257	Determining Residual Stresses With the Aid of Optical Interference Techniques
		D.M. Findeis, J. Gryzagoridis, University of Cape Town
2:20 PM	512	Interfacial Fracture Toughness and Residual Stress of Thermally Sprayed Coatings
		Y. Okajima, Mitsubishi Heavy Industries, Ltd.; T. Nakamura, S. Sampath, State University of New York
Session 089   Microstructure Material Characterization (Thursday Late Afternoon)
3:00 PM	108	Evaluation of Microstructure-slip Relationships in BCC Tantalum
		J.D. Carroll, B.L. Boyce, Sandia National Laboratories
3:20 PM	417	Spatial Distribution of net Burgers Density Vector in a Deformed Single Crystal
		A. Sarac, M.S. Oztop, J.W. Kysar, Columbia University
3:40 PM	281	Design of Ultrasonic Probe Configuration Using Finite-difference Time Domain Simulation
		R. Sharma, Indian Institute of Technology Madras; S. Baskaran, IIQC Advanced Inspection Solutions Pvt Ltd.; H. Murthy, Indian Institute of Technology Madras
4:00 PM	343	Experimental Methods for Validation of Multiscale Plasticity Models
		L. Bodelot, A.W. Richards, G. Ravichandran, K. Bhattacharya, California Institite of Technology
4:20 PM	121	Absorbed vs. Released Energy in the Cracking Process of Heterogeneous Materials Under Compression
		G. Lacidogna, M. Corrado, A. Carpinteri, Politecnico di Torino
Session 090   Composites, Hybrids & Multifunctional Materials (Thursday Late Afternoon)
3:00 PM	193	Viscoelastic and Viscoplastic Behavior of GF/VE [±45]s Laminates
		J Varna, K. Giannadakis, R. Joffe, Lulea University of Technology
3:20 PM	504	Crack Growth Prediction Using the LEFM-based Cracked Beam Element
		H.M. Ngwangwa, University of South Africa; P.S. Heyns, F. Van Tonder, University of Pretoria
3:40 PM	163	Design of new Elastomeric Matrix Composites: Comparison of Mechanical Properties and Determining Viscoelastic Parameters via Continuous Micro Indentation
		D. Zaimova, E. Bayraktar, Supmeca-LISMMA-Paris; G. Berthout, CSM Instruments SA; N. Dishovsky, UTCM, University of Technology, Chemistry and Metallurgy
4:00 PM	245	Polyurea-based Composites: Ultrasonic Testing and Dynamic Mechanical Properties Modeling
		W. Nantasetphong, A.V. Amirkhizi, Z. Jia, S. Nemat-Nasser, University of California, San Diego
Session 091   Fracture & Fatigue (Thursday Late Afternoon)
3:00 PM	291	Extracting the Mixed-mode Traction-separation Relations of Chip-Package Interfaces
		S. Gowrishankar, J.S. Dixon, K.M. Liechti, R. Huang, University of Texas at Austin
3:20 PM	390	Detailed Measurements of Thread Deformation and Failure in Thin Walled Aluminum Alloy Joints
		B.R. Antoun, S.J. Grange, G.W. Wellman, J.F. Dempsey, Sandia National Laboratories
3:40 PM	397	Experimental Characterization of Integral Invariants in Wood Specimen Using the full Field Optical Technique
		O. Pop, M. Meite, F. Dubois, J. Absi, Limoges University
Session 092   Modeling & Uncertainty Quantification (Thursday Late Afternoon)
3:00 PM	375	Uncertainty in the Dynamics of Gear-pair Fatigue and Fracture
		F.M. Alemayehu, S. Ekwaro-Osire, Texas Tech University
3:20 PM	37	Simulation of Interference Fitted Joint Strength as Used in Hot Rolling Work Rolls
		M.D. McMillan, J.D. Booker, D.J. Smith, University of Bristol
3:40 PM	124	Modelling of Nosing for the Assembly of Aerospace Bearings
		J Woodhead, J.D. Booker, University of Bristol
4:00 PM	191	Multi-axial Quasi-static Strength of a Clinched Sheet Metal Assembly
		S. Coppieters, P. Lava, Catholic University College Ghent/K.U. Leuven; H. Sol, Vrije Universiteit Brussel; P. Van Houtte, Katholieke Universiteit Leuven; D. Debruyne, Catholic University College Ghent/K.U. Leuven
4:20 PM	356	Development of a Test Simulator to Perform Optimized Experiment Design
		M. Rossi, Arts et Métiers ParisTech/Universitŕ Politecnica delle Marche; F. Pierron, Arts et Métiers ParisTech; P. Lava, D. Debruyne, K.U. Leuven
4:40 PM	507	Interval Identification of Constitutive Parameters of Fractional Viscoelastic Models
		H.T. Yang, X. Zhao, W.A Yao, Dalian University of Technology
Session 093   Dynamic Behavior of Geo-Materials: Concrete (Thursday Late Afternoon)
3:00 PM	242	Experimental Investigation on Dynamic Behavior of Ultra High Performance Composite Concrete With Kolsky Bar
		H. Park, W. Chen, Purdue University; B. Martin, Air Force Research Laboratory; W. Heard, U.S. Army Engineer Research and Development Center
3:20 PM	358	Dynamic Tri-axial Compression Experiments on Cor-Tuf
		A.B. Mondal, H. Park, W.W. Chen, Purdue University; B. Martin, Airforce Research Laboratory: W. Heard, Engineer Research and Development Center
3:40 PM	116	Discrete Modeling of Projectile Penetration Into Ultra High Performance Concrete
		J. Smith, G. Cusatis, Northwestern University; D. Pelessone, Engineering and Software System Solutions Inc.; J. O'Daniel, U.S. Army Engineer Research and Development Center
4:00 PM	360	Numerical Simulations of the Mechanical Behavior of Adobe
		C.S. Meyer, U.S. Army Research Laboratory
4:20 PM	435	Investigation of the Effect of Damage on the Mechanical Response of Salem Limestone at Subjected to Quasi-static and High Rate
		P.M. Gullett, Z.K. Crosby, Mississippi State University; J.D. Cargile, S.A. Ackers, U.S. Army Engineer Research and Development Center
4:40 PM	495	Influence of the Confined Behaviour and the Tensile Strength of Concrete Slabs Under Projectile-impact
		L. Sallier, P. Forquin, Universite Paul Verlaine - Metz
Session 094   Experimental Mechanics Applications for Civil Structures (Thursday Late Afternoon)
3:00 PM	144	Simplified Calculation Method of the Torsion Effect on the Seismic Behavior of Timber Buildings
		T.K. Vu, E. Fournely, R. Moutou Pitti, A. Bouchair, Universite Blaise Pascal/CNRS
3:20 PM	141	Experimental Analysis of the Semi-rigidity Joint in the Standardized Timber Beam
		E. Fournely, Universite Blaise Pascal/CNRS; R. Moutou Pitti, Universite Blaise pascal/CNRS/CENAREST; A. Bouchair, Universite Blaise Pascal/CNRS; F. Dubois, Universite de Limoges
3:40 PM	3	Nano-Macro Correlation of Nano-Silica Concrete
		J. Schoepfer, A.K. Maji, University of New Mexico
4:00 PM	459	Digital Image Correlation Measurements of a Nuclear Reactor Containment Dome During a Structural Integrity Test
		T.E. Schmidt, Trilion Quality Systems; S. Yim, T. Esselman, Lucius Pitkin; R. Johansen, U.S. DOE LWRS; M. Fallin, Constellation Energy Nuclear Group
4:20 PM	16	Experimental results of green wood slice under natural drying
		R. Moutou Pitti, Universite Blaise Pascal, CNRS, CENAREST; F. Dubois, Universite de Limoges; E. Fournely, Universite Blaise Pascal, CNRS
Session 095   Impact Behavior of Composites (Thursday Late Afternoon)
3:00 PM	20	Ballistic Impact Behaviors of GLARE 5 Fiber-Metal Laminated Plates
		A. Seyed Yaghoubi, B. Liaw, The City College of New York
3:20 PM	180	Impact of Aluminum, CFRP Laminates, Fibre-Metal Laminates and Sandwich Panels
		S.Q. Zhu, G.B. Chai, Nanyang Technological University
3:40 PM	361	Impact Monitoring in Aerospace Panels via Piezoelectric Rosettes
		F. Lanza di Scalea, H. Kim, S. White, Z.M. Chen, University of California San Diego; S. Salamone, State University of New York at Buffalo; I. Bartoli, Drexel University
4:00 PM	411	Using Experimental Data to Improve Crash Modeling for Composite Materials
		M. Kiani, Mississippi State University; H. Shiozaki, Mitsubishi Motors Corporation; K. Motoyama, Mississippi State University
4:20 PM	22	Thickness Effect on Cross-ply GLARE 5 FML Beams Subjected to Ballistic Impact
		A. Seyed Yaghoubi, B. Liaw, The City College of New York
Session 096   Advances in Residual Stress Measurement Methods (Thursday Late Afternoon)
3:00 PM	129	Hole-drilling Residual Stress Measurement in an Intermediate Thickness Specimen
		C. Abraham, G.S. Schajer, University of British Columbia
3:20 PM	461	Effects of Strain's Error on Residual Stresses Calculated by HDM
		C. Casavola, G. Pappalettera, C. Pappalettere, F. Tursi, Politecnico di Bari
3:40 PM	132	Hole-drilling Residual Stress Measurement With Artifact Correction Using Full-field DIC
		G.S. Schajer, University of British Columbia; B. Winiarski, P.J. Withers, University of Manchester
4:00 PM	64	Anisotropic and Pressure-dependent Plasticity Modeling for Residual Stress Prediction
		M.B. Prime, Los Alamos National Laboratory
4:20 PM	453	Simulation of Triaxial Residual Stress Mapping for a Hollow Cylinder
		M.D. Olson, W. Wong, M.R. Hill, University of California, Davis
Session 190   International Student Poster Session ()
12:00 AM	517	Phase Unwrapping Using Novel Rotation Algorithm
		J.-F. Weng, National Cheng Kung University
12:40 AM	519	The Algorithm for Closed Form Time-Temperature Superposition
		M. Gergesova, University of Ljubljana
1:00 AM	523	Simulation of Structural Damage on the Dowling Hall Footbridge
		A. Kody, Tufts University
1:20 AM	527	Damage Detection of Composites Under Fracture and Shear Using CNTs
		S. Cardoso, University of Massachusetts Dartmouth
2:00 AM	530	Experimental Identification and Control of a Three-story Building Model
		C.M. Pappalardo, University of Salerno
2:20 AM	531	The Impact Behavior of Tetrahedral Truss Lattice Structures
		J. Liu, University of Pierre and Marie Curie
2:40 AM	532	A 3D Thermodynamic Model for Shape Memory Alloys
		K.L.M. Preetish, IIT Madras
3:00 AM	533	A Theoretical Model for a SMA Fiber Embedded Composite Beam
		D. Sumanth, IIT Madras
3:20 AM	534	Information Gain Obtained From Extra Sensors on Model Updating of the Dowling Hall Footbridge
		I. Behmanesh, Tufts University
4:00 AM	538	Algorithms for HDM Residual Stress Measurement: Numerical-Experimental Comparison
		F. Tursi, Politecnico di Bari
4:20 AM	539	Size Effects on Mechanical Properties of Five-fold Twinned Silver Nanowires
		Q. Qin, North Carolina State University
5:00 AM	543	Effect of Confinement on Laser-induced Stress Waves
		P. Miller, University of Washington
5:40 AM	545	A Technique for Unconfined Compression Testing of Soft Biomaterials
		L. Wang, Southern Methodist University
6:00 AM	546	Experiment to Measure Ecosystem Surrounding and its Effect on Measure of Environmental Impact
		A. Morales-Leon, Technological University of Campeche
6:20 AM	547	Structural Stability of a Microgravity Experiment Container
		M. Umar, California State University, Fresno
6:40 AM	548	On-machine Shape Measurement Method With Grooving Using Grating Projection
		J. Li, Wakayama University
7:00 AM	550	Fringe Pitch Adjustment Method for Shape Measurement Using LSSM
		Y.i Oura, Wakayama University